Ironing board with own hands: technology of construction

Ironing board is very comfortable.accessory that facilitates the process of care for garments. However, its storage is quite problematic. An ironing board, made with hand-made materials, can be built-in or folding, which greatly facilitates its use.

Такое изделие можно самостоятельно встроить в wall or partition. At the same time, it can be disguised as a general interior, and the board will not be noticeable when folded. In order to build such a structure, you need a grinder with a cutting ring, a drill, sandpaper, a hacksaw, and a vacuum cleaner (for garbage collection). Built-in ironing board is done quite simply. It is necessary to take a piece of thick plywood and cut out an element of the required shape from it. On it sawed a hole in the wall.

In order for the board to be put andto use, you will need a wooden beam support. The element will be attached to the wall with hinges. Such an ironing board is cut out very quickly. The depth of the niche for the product should be about 10 cm. The height and width of the niche should exactly repeat the dimensions of the board. After the hole is ready, it should be carefully treated with emery paper and a primer mixture. In principle, in order to "civilize" the opening, you can use drywall.

Ironing board, self-made,It has a simple construction, so even a non-specialist can cope with the work. While attaching the product, it should be taken into account at what height you will use it. Try to mount the board so that you feel comfortable. After the main canvas is bolted, you should fix the support on which the board will be installed in the operating mode.

Folding ironing board do it yourselfconstructed according to the same pattern. If you want the self-made construction to be laid out, then it must be cut in the middle and twisted with the help of loops. In this case, the board will take much less space and will be quite easy to use.

To fully prepare the design for work,It should cut a piece of foam rubber, the size of which will correspond to the dimensions of the canvas. Next, attach it to the plywood and cover with a fabric cover. The seamy side of the board can be pasted over with the same wallpaper with which the walls of the room are decorated.

Note that the board must befixed in the wall with a special device. Otherwise, she can lean back on her own. This situation should not be allowed. During work, all wooden parts should be treated with an antiseptic, which will significantly increase the life of the wood.

Basically, ironing board, do it yourselfmade in compliance with all the rules, can serve you for a long time and will cost much cheaper than the store product. These are all features of a construction of the presented design. Choose for work only quality materials. Good luck!