If you have completed the construction of a frame house, you still have to think about its interior decoration. Only in this way you can achieve comfort and comfort in the premises.
Technology
Similar work is carried out in two stages, the first of whichwhich provides for rough manipulation, while the second - finishing. Initially, it is necessary to prepare the surface of walls, ceiling and floor, under such measures is understood the removal of the old coating, as well as the preparation and leveling of surfaces. Finishing is the finishing stage, when the surfaces are exposed to wallpaper, installation of lining materials or painting.
Selection of material for roughing
It may take several months for the exterior finishframe house. Interior finishing is carried out in the same period. After visiting the building store, you can select the material that will correspond to the allocated budget and certain characteristics. To conduct roughing, the most commonly used OSB or drywall. As an advantage in these cases, it is possible to hide the shortcomings of walls using flat sheets. You can install such cloths on untreated or curved surfaces. With the help of GKL you can create complex design compositions. In a short time you will be able to make up the walls, preparing them for further work.
Disadvantages of using GKL and OSB for carrying out rough work
If you purchased a newly builtframe house, interior plasterboard you can be made by yourself. However, this material has some disadvantages, which will be expressed in reducing the area of the room when installing sheets on uneven walls. If there are any, then first you need to mount a skeleton system that will be somewhat removed from the base. This applies to the OSB, which has a more impressive thickness. If you use this material to level the ceiling, then without additional devices for lifting the canvas will be very difficult.
However, sometimes the solutions described are the only true ones.
Pros and cons of using wallpaper
Considering the options for interior decorationframe house, you can pay attention to the traditional wallpaper, which are presented in the modern market in a wide variety, they can be paper, acrylic, vinyl, fiberglass and non-woven. Each of these types of finishes has its own positive and negative features. For example, paper wallpapers, although they have low cost, but are extremely unstable to the effects of low temperatures and moisture, and without that they are very short-lived. You can use them as a temporary solution.
Interior finish frame house, photo of whichpresented in the article, can be carried out with the help of vinyl or acrylic wallpaper, which are resistant to mechanical damage and are strong. The latter are characterized by durability and moisture resistance. Owners of private homes that want to diversify the interior, choose a non-woven version of the coating, which is made of foamed vinyl, it can be used as a basis for further decorative painting.
The worst enemy of skeleton wooden houses is fire.If you want to make housing more fire-safe, it is worth buying glass fiber wallpaper, which along with the mechanical strength are resistant to the effects of flame. In this case, they can be successfully used for staining.
Positive and negative features of the lining
Quite often recently,interior trim frame house lining. This is not accidental, since this material can bring home cosiness and natural appearance. Wood will allow to give the walls a higher sound and heat insulation. Depending on the available funds allocated for repairs, you can choose a lining that will belong to a particular grade.
On the surface of the elements there will be no defects, ifyou prefer an extra-high-quality car window. Consumers who do not fear the presence of chips and spots, choose the finish of grade A. The material is denoted by grade B if there are several cracks and knots on one of the slats.
Considering materials of interior decorationframe house, you can choose a plastic lining, which can be installed independently, as it is quite easy to install. This finish is low in cost and not exposed to harmful bacteria. With the help of plastic slats it is unlikely to achieve coziness in the room, and the artificiality of the material will be immediately visible. According to the sound and heat insulation characteristics of PVC inferior models of natural wood, but it can be installed in rooms with a high level of humidity.
Carrying out of walls with plasterboard
Technology must be respected whenthe frame house is finished. Interior decoration, as already mentioned above, may include the use of drywall. With its help, you can hide any unevenness, which eliminates the time-consuming alignment of the base. Fixing the canvas is done on a metal frame, which speeds up manipulation. The resulting free space between the main wall and the sheet can be filled with insulation material, as well as laying electrical wiring and other communications.
Low weight drywall will not createan additional load on the overlap, so that you can build arbitrarily complex geometric structures, which sometimes represent multi-level ceilings.
Initially, the master has to implementmarking, reinforcing the self-tapping starting UD-profiles, then the wiring is placed in special plastic boxes or corrugated pipes from polyvinyl chloride. Plasterboard sheets must be laid on the profile and fixed with self-tapping screws for metal. The cap of the fastener should be recessed by 1 millimeter. Even an inexperienced craftsman can finish the frame house. Interior finish with plasterboard will be completed in a matter of days. Carrying out these manipulations does not imply that the master has special skills.
The seams formed between the sheets are necessaryfill with putty, the tool will need to get rid of excess material, making alignment of the seams. After that, a fine-grained abrasive sandpaper comes in, which will allow the joints to align to prepare the sheets for finishing.
Use of OSB plates
The technology of mounting such canvases is hardlydiffers from that used for wall plastering with plasterboard. The only difference is the impressive weight of the OSB. For this reason, you need to use a more reliable and durable fasteners. To fix the canvas to the wooden frame, use spiral 50-mm nails. In the joints, the fastener is installed in steps of 15 centimeters. At the edges of the edges of the walls should leave centimeter gaps, but the distance between the plates that do not have a connection, should be two millimeters. If you plan to use the OSB to form a floor covering, then you need to lay the sheets, placing them perpendicularly to the lags.
The installation of sheets does not include all the finishingframe house. Interior finish provides surface treatment with sandpaper. After this, the plates are varnished in 3 layers, each of which must be dried well. Such a coating acts as a protection of the structure of the material from the penetration of moisture. If you decide to cover the surface of such a rough base with plaster or paint, then first it is necessary to apply a primer.
Advantages of use in interior decoration of the bar
Over time, the imitation of the bar becomes more and morepopular, especially if you make a comparison with the lining. The premises after the finishing works are obtained are warm and aesthetically attractive. All the advantages of this material are related to the qualitative characteristics, which are expressed in the absence of shrinkage. Over time, the lamellas do not crack, since they are provided with grooves to relieve stress within the articles. During installation, time and labor costs will be minimal. The pluses include that such a finish is not afraid of the effects of ultraviolet rays.
If you choose certain types of wood, thenthey will not be adversely affected by moisture. The cost of such a material is much lower compared to a full profiled or glued beam. And if you carry out a quality installation, then the appearance of such walls will almost not differ from the natural log. The interior finishing of the frame house by imitation of the beam is not afraid of the influence of high and low temperatures.
The main disadvantages of imitating a bar
Despite the fact that the products in the processManufacturers undergo processing with various anti-fire compositions and antiseptics, they do not cease to be fireproof. In the process of exploitation you will have to process the wood once a year, otherwise it will be covered with cracks, change its color, and when exposed to fire it will light up. If the interior finishing of the frame house is done by hand with the imitation of a bar, then the timber will have to be maintained for the entire service life, covering the surface of the walls with protective means and paints and varnishes.
It is impossible not to note one more disadvantage, whichis expressed in expensive components according to the type of internal corners, decorated elements and external consumables. If you do not want the walls to resemble the lining, then you need to use panels whose width starts from 90 millimeters.
Minuses of imitation timber from pine
If the interior walls of the frame housewill be made by imitating a bar, it is important to choose the right type of wood. For example, pine has some drawbacks, among them is gumminess, which indicates an increased fire hazard. Before the installation works, despite the fact that the material was treated with flame retardants in the factory, it is necessary to apply a fire-fighting composition. It is worth remembering that the scent of pine is kept very long, after a certain time it can start to irritate. That's why this feature should be taken into account when decorating living rooms.
Conclusion
Interior decoration of the frame house OSB slabs is most often in the case when there is no deficit in the free space. Otherwise, it is best to choose sheets of drywall.
