If your house has a hood, it is worththink about the last time you looked under her dome or checked the filter for cleanliness. If you did this a few months ago or are just going to do it, then you should be prepared for the fact that the view will be intimidating. The filter in the exhaust performs the role of collecting fat, vapors and odors, therefore, regularly performing its work, it becomes dirty in the shortest time of intensive use of equipment.
For reference
На поверхности фильтра вы сможете увидеть pretty thick layer of dirt. Over time, the filter may become contaminated to such an extent that it will be ineffective at work. To avoid this, it must be cleaned periodically. You can cope with the work at home. If you have wondered how to clean the hood from fat, you should know that such work should be carried out at least once a quarter. And if you often cook, they can be repeated once a month.
Features of preparation
Cleaning the hood begins with preparatoryworks To do this, the device is turned off and disassembled. You must first read the instructions to the equipment. Before you start cleaning, you need to dismantle the cover, which is located above the stove. To do this, the latches are disconnected, only then can the element be removed from the slots.
Далее следует извлечь фильтр и снять трубу, which connects the outlet with the hood. She, too, to be washed away from fat. Then you can also remove the air filter. The case of the equipment should be checked for the presence of dirt.
Если вы задумались над вопросом о том, как отмыть extractor from grease, you should know that the filters can be washed in the bath, soaking them in a solution of dishwashing detergent. As for the air filter, it does not always need to be cleaned. Information about this you can always find in the instructions.
The surface of the hood must be thoroughly cleaned.For this, standard detergents and a sponge are commonly used. The composition must be diluted in water, using a ratio of 1 to 4. Sponge in the tool must be moistened and wipe the surface of the device with it. After completion of cleaning, the base is wiped dry to avoid any stains. When it comes to the filter, you can experiment on cleaning it, because there are so many ways to do this.
The choice of method
Before you wash the hood from fat, you mustselect a technology that will use the appropriate means. The most popular solution will be fat-soluble products that are used for washing dishes. The filter is soaked in the composition, and after that it can be wiped with a brush or sponge, sprinkled with boiling water at the final stage. The effect can be achieved only if the pollution is quite fresh.
The filter can be cleaned with sodasolution. This approach is the simplest, safest and at the same time most effective. Quite often, housewives ask how to wash the hood from fat. To do this, take a large saucepan, fill it with water and put on the fire.
Как только вода закипит, следует засыпать в неё soda in the amount of 1 cup. When all the soda is on the bottom, it should be well stirred and placed in a saucepan filter grate. The element should be boiled for half an hour, until the pollution is gone. If the capacity is large enough, the procedure can be repeated by inverting the filter. At the final stage, you will need to wash the pan.
Alternative solutions
You can clean the grease filter with soap.For this perfect 72% composition. For the work will need 0.5 pieces, hot water and a grater. A bar of soap is rubbed so that it can be dissolved in hot water. A sponge is wetted in the product. She should wipe the hood surfaces and filter. The metal scraper will allow to get rid of old pollution.
Use at home can be a meanscooked on the basis of vinegar. It is important to be careful with this, since the tool can not be called safe. Rubber gloves should be used for protection. Use an acid wetted cloth for cleaning. All contaminated sites should be wiped thoroughly, wetting the surface.
Vinegar is left on the ground for up to 7 minutes ifpollution is quite impressive, it is possible to extend this time to 12 minutes. Undiluted acetic acid can be used for long-term contaminants. If the spots appeared recently, then you should use a solution with water, which should be prepared in a ratio of 1 to 2.
Use of citric acid and pipe cleaners
If you also wondered about how to washhood in the kitchen of fat, you can use lemon juice. To do this, prepare two fruits that are peeled and cut in half. The hood should be pulped. The basis is left for 10 minutes, after it is possible to remove pollution with soft damp rags.
If the fat is formed on the hood prettyimpressive layer, the procedure can be repeated several times until you can achieve a positive result. If you still do not know how to clean the hood in the kitchen from fat, then you can use a radical method that involves the use of a tool for cleaning the pipeline. However, experts do not recommend using this technology too often. For the entire life of the hood, this method can only be resorted a couple of times.
However, if the filter has not been cleaned for a long time, butthe fat is clogged in its cells thoroughly, then this method will help you out. In addition to the means for cleaning the drain pipes, you will need a stainless steel tank. Well, if the kitchen sink stainless steel.
The tool should be prepared according to the instructions.It is poured into a closed sink, and then put the filter in the composition, not forgetting to wear gloves. You will see the reaction, after that the grid will need only a few times to rinse under running water. In this method, alkali is used, which is capable of rather aggressively affecting metallic elements.
How often do I need to clean the hood
Some mistresses are wondering howIt is often necessary to clean the hood and its elements. It all depends on how often you cook. If the cooker is working every day, the hood must be cleaned once every three months. Otherwise, it will be enough once every six months. However, more frequent cleaning procedures will make it easier to cope with the layers of fat, because the old stains firmly eats, this is especially true of the metal mesh.
If you wondered how to clean the meshextracts from the fat, you can put it in the dishwasher, the temperature should be minimal. Use a gentle detergent for cleaning. If you decide to manually clean the mesh, it will be enough to use traditional cleaning agents that are pre-dissolved in warm water.
Additional recommendations
As an alternative cleaning solutionelements of the hood can make a solution of soap and soda in water. After boiling the grill, it will be easier to clean it of fat. This process usually takes 5 to 10 minutes. Turning the grate to the other side, the procedure should be repeated. But it does not end there. After boiling, the grate is soaked in the solution that remained after the procedure.
Instead of the pan, you can use a large basin.The grate is left for several hours, only in this way will it be possible to remove old stains. A tool for this may be a brush or a rag, but it is important to try not to damage the part itself. Sometimes prolonged soaking and boiling is not enough, in this case, you can use ammonia, which is a reliable and proven tool.
Если перед вами встал вопрос о том, как отмыть extract from fat at home, then half a glass of alcohol should be diluted in 3.5 liters of water, previously wearing a mask or respirator. In the room where you plan to carry out these works, you need to open the window. The filter is placed in the hot solution and left for several hours. As soon as the dirt begins to move away, it can be removed with a stiff brush, but the intensity of the impact should not be such that could cause damage to the part. The filter at the final stage is wiped with a dry cloth.
Use bleach
If you, too, are among the hosts whothinking about how to wash the hood from fat, improvised means will do you a good service. Bleach is another method, it helps to get rid of impurities not only in the filter area, but also in the case area. To begin with, it is necessary to moisten polluted places with water, and then apply whiteness, the most convenient way is to use a toothbrush for this. After 10 minutes, the product and residues of scale are removed with a sponge, and the elements can be washed under running water.
How to avoid fatty deposits
Of course, it is important to know how to clean the filter.kitchen hood from fat. But such pollution can be avoided if you follow the rules for the care of household appliances. Each time after cooking, grease splash can be removed from the surface of the device with a soft cloth. To carry out such work, you should choose the right cleaning agent, with which the care of the hood will not be too difficult.
Когда на плите не стоит посуда, газ не должен to remain on, in addition, cleaning the hood should be carried out only after it is turned off from the mains. The installation of the hood should be entrusted to a professional, otherwise the device may be located too close, which will cause the appearance of the fat layer much earlier than one would expect.
Using a steam cleaner
If you have a problem, how to washkitchen hood from fat, then you can use the effects of steam. To do this, you need a steam cleaner, which is pre-poured water. At the next stage, the device is turned on in the network, and then you just have to drive. There are such models of steam cleaners, complete with which special wipes and nozzles are supplied. They will help when cleaning the hood.
Conclusion
Among the most frequent questions that ariseIn the head of the housewives who monitor the cleanliness, we can single out one thing: how to wash the hood with grease with soda. To do this, the powder can not be dissolved in water, but simply wipe the contaminated surface with it. However, it is important to make sure first that the abrasive particles do not damage the substrate.
Once the surface has been rubbed with soda, youYou can wash it with water using a sponge or soft cloth. Now you know how to quickly wash the hood from fat. In order to achieve a positive result, you can use several tools in the complex or decide which technology suits you more than others.
