Parquet lacquer: types and features

Today, to protect the parquet floor fromexternal influences, as well as to give it shine and beauty using parquet lacquer. Thanks to the coating of the surface with a special compound, its service life is significantly increased, and its performance is also improved.

The technology of applying a lacquer coating is not too complicated, and anyone can master it.

In order to coat the parquet with varnish, it is necessary to perform a series of sequential actions, since only in this case the result will be reliable and of high quality.

So, first of all you need a specialdisc polish disc parquet so that it becomes perfectly smooth. After that, you should putty all seams and clean the surface of all kinds of debris. Before you apply parquet lacquer, you should treat the entire surface of the floor with a primer varnish, due to which the adhesion of the base material to the surface will significantly improve. After the primer lacquer has dried, you can apply a varnish for the floorboard.

Today, almost in any hardware storeYou can easily buy a parquet lacquer product, but before you make a choice, you need to consider a sufficient number of factors. For example, the type of wood used, the strength of mechanical loads on the floor, the desired color and, of course, the cost of the lacquer material itself and its consumption.

Given the above, it should be noted thatParquet lacquers can be of four types: water-based (water-based), polyurethane, lacquer material with an artificial oil resin or with a special acid hardener. Consider each of the types of this material in more detail.

Water parquet lacquer does not have a strong odor, is highly fire resistant and environmentally friendly. It also dries very quickly.

Thanks to such properties, it is usedwhen covering parquet in residential premises. However, there are disadvantages: the varnish is not resistant to chemicals and may not be suitable for some types of wood.

Parquet lacquer with artificial oil resinsIt is used mainly for the restoration of old coatings, as due to the formation of a dense oily film, it improves the appearance of a scuffed floor. It has a very strong odor, therefore it is mainly used in public places.

Polyurethane varnish - the most widely usedand effective. It has high wear resistance and resistance to mechanical and chemical influences. Varnish allows the surface to not lose its natural shade and give it the desired shade. This material dries within six hours. And since it has a rather sharp smell, you should wear protective gear when working with it.

Acid parquet lacquer.This is a mixture of varnish and hardener - an unpretentious material with an acid hardener. It does not need pre-priming, has a high resistance and is completely insensitive to moisture and temperature changes.

Thus, choosing parquet lacquer, shouldconsult with a professional. Managers of building stores will always help the client to choose the most appropriate type of product and tell about the features of its application to the surface.