Paving of garden paths is not an occupation at allcomplex, it is within the power of every owner of a suburban area. Such paths have a long service life, look beautiful and perfectly fit into any style of landscape design. Modern tile for garden paths - the material is quite strong, and as decorative trails are not designed for intensive traffic, making them independently is not very difficult even for beginners.
Как правило, ширина таких дорожек варьируется от 0.5 to 1.5 meters. Proceeding from this, it is necessary to select the sizes of a building material. Determining the width of the path, it should be borne in mind that when laying pavement tiles for garden paths should fit completely between the borders, that is, there should not be a need for its pruning. Thus, you will not only save on buying material, but also get a smoother and more beautiful surface.
Tile for garden paths can be laidin various ways, but the most common are brickwork, "column" or "herringbone". In this case, you should choose the material of a rectangular shape of standard dimensions. So you get a laconic, geometrically leveled surface. If you want to decorate the garden with an original and spectacular path that will emphasize the style and sophistication of your site, you should pay attention to the finishing material such as the tile for garden paths "wave". Separately, it should be noted that if you want the path to serve a long time, you should carefully observe the technology of its paving.
After you have marked the direction of futurepaths, it is necessary to remove the top layer of the soil and thoroughly clean the surface of the stones and roots of plants. At the installation site of the curb, it is necessary to dig a depression along the entire length of the future path with a depth of at least 15 centimeters. The bottom of the trench should be covered with sand, moistened and carefully tampered. Install the curb is on a liquid concrete mortar.
Once the preliminary work is completed, andthe base of the curb should be dried properly, it is necessary to prepare the area of the path for its paving. For this you need to lay the entire length of the base of gravel or gravel about eight centimeters thick and carefully level. The tile for garden paths is laid on the compacted base. For this, a concrete mix is used. Between the plates should leave a gap of about five millimeters. If at work you need to cut paving slabs, it is better to use a diamond grinder for this.
After the tile for the garden pathslaid, the seams should be covered with a cement-sand mixture and remove the excess with a broom. The whole surface of the track must be thoroughly moistened, it is better to use a hose with a diffuser for this purpose. On the garden path, laid in a similar way, you can walk right away, without waiting for the complete drying of the concrete.
Decorative garden path will clearly decorate your site, and the realization that this beauty you created with your own hands, will increase pleasant impressions.
