The tasks of providing the house with heat can be solveddifferently. Some homeowners initially focus on the central systems, counting on them the layout and arrangement of housing. Other users prefer compact heaters that are independent of water and gas communications. This group, in particular, is represented by wall-mounted electric convectors, which differ from competitors by their modest size, stylish design and ease of operation.
Device and principle of operation of the device
Конвектор представляет собой небольшую по the size of the metal structure, inside which contains a heating element (heating elements). In this case, it is considered electric models, but there are also infrared, gas, oil and other types of such heaters. What is the difference between electric wall convectors? The description of the principle of operation can be represented as follows: the heating element under the case increases the temperature of the air, which constantly circulates in the device, passing through the louver grille. From below, the cold masses rise and flow in portions to the heating element, and the sidewall of the heater releases warm flows.
As for the wall mounting method, thenIt gives certain advantages. First, it saves free space. Secondly, there is no need to search for individual routes for convenient cable laying. The device is installed anywhere with close access to the outlet. But there are also drawbacks to electric wall convectors for heating. Economical models are less common in this segment, since energy consumption increases the cost of maintaining equipment. Optimal in this regard, the devices are equipped with solid cast X-shaped heating elements, which are also distinguished by high precision temperature setting and noiseless operation.
Performance
Not the strongest quality electricalconvectors is and power. But since this is a very important parameter, it is worth starting with a review of the characteristics. On average, this potential varies from 750 to 3000 watts. In choosing the right indicator, it is worth adhering to the calculation according to the following formula: a 1000 W model serves 10 m of the target area provided that there is one window opening in the room. If we are talking about a non-standard room (for example, a corner) with several openings, then another 20% is added to the nominal rated power. With regard to voltage, the standard is considered 220 V. In extreme cases, with lower rates up to 120 V, you will need to use an adapter-transformer for a safe connection. The average characteristics of electric wall convectors in terms of dimensions look like this:
- Height - from 20 to 90 cm.
- Thickness - from 5 to 7 cm.
- Length - from 40 to 120 cm.
Another important parameter is the type of coveragewhich will also affect the performance of the heater. Preference is given to buildings treated with powder enamel or polymer compounds. They retain the original shade longer and contribute to the efficient distribution of thermal radiation.
Control system
Equipment control is carried out throughSpecial thermostats - additional devices, thanks to which the user can set the operating parameters. In the simplest version, an electric wall-mounted convector with a manual-type temperature regulator allows you to adjust the temperature to an accuracy of 1 ° C. These are mechanical thermostats in the form of buttons or switches on the case.
A more modern version suggestselectronic control, in which the temperature setting scale can have divisions of the order of 0.1 ° C. The most developed electric wall-mounted convector with a temperature regulator also supports the elements of intellectual regulation. This means that the modes can be set on schedule with the calculation of the day, days and months. Moreover, in some versions, the possibility of autocorrection of working parameters is allowed, based on the current indicators of the outdoor temperature sensor.
Additional Features
For a small surcharge, you can get not justa heating device with a basic set of controls, but also systems that make it safer and more comfortable to work. The most useful are the protective functions that turn off the convector under intensive loads with overheating or under working conditions under strong external influences. If in a house or apartment power surges are observed, then you should pay attention to the automatic restart function. When the network recovers its optimal operating parameters, the heater will also return to the basic settings.
In terms of creating beneficialmicro wall will be useful and electric wall convector with ionization function. Devices with this effect of heating eliminate dangerous bacteria, and in some versions relieve the air environment and from unpleasant odors. Now it is worth going to get acquainted with specific models of electric wall-mounted convectors. The instrument overview presented below reflects the most attractive offers in the segment.
Noirot Spot E-3 1000
The average electric heater in terms of performance, with a power of 1000 W is enough to maintain an area of 10-15 m2. Useful additions to the device includefast heating and drying of air. As for protective systems, the model is provided with electronic automation, thanks to which the filling can withstand significant voltage fluctuations. Users themselves recommend the electric wall-mounted convector for heating the Spot E-3 1000 as a productive, reliable and cost-effective solution. With the price tag of 6.5 thousand rubles. and belonging to the family of one of the largest manufacturers of climatic equipment, it is truly one of the best options in the niche in question.
Nobo Viking C4F 20 XSC
Also developed by a major player in the market.heaters, but a higher grade. Immediately it should be emphasized that this model is suitable for work in a large private house, and for commercial use in office space. As the manufacturer himself notes, the power of 2000 W is enough to fully fill the area of 25-30 meters with warmth.2. By design features includealuminum fins, which eliminates the effect of burning oxygen. With regard to the minuses of the electric wall convector of this model, it is worth noting the high cost - about 12 thousand rubles. This is a solid price tag, even with a decent margin of power, but less well-known competitors have analogues with the same characteristics available for 7-8 thousand rubles. Another thing is that this difference is compensated by the margin of safety and durability of the filling, which can be assessed only after years of operation.
Timberk TEC PF8 LE 1000 IN
Reliable unit for servicing small premises with an area of 10-12 m2. Control is via LED display orremote control. There is an ultra-accurate thermostat, so you can count on a flexible setting of operating modes. The main advantages of this model are in a wide range of protection systems and high-quality insulation of the case. The design has received the protection class IP24, which eliminates the penetration of dirt and moisture into the power filling. If you need an electric wall convector to give, this option will be optimal. The practice of using a heater also shows that it exhibits good resistance to voltage drops. Of the minuses, you can again note a modest working area, but again for a small apartment or a country house, again, this would be ideal.
Electrolux ECH / B-1500 E
With such an assistant, the heating system can count on even heating of rooms up to 15 m.2. The power of the convector is 1500 watts, andthe design is made in a monolithic form factor with aluminum air outlet louvers. All this ensures efficient and fast heating without thermal effects on the hull. What does it mean? The glass-ceramic panel of the device does not heat up during operation, therefore the device is safe even for children. The protection of the heater itself corresponds to the already mentioned IP24 class, although the model is not deprived of the presence of automatic shutdown devices. As an electric wall convector for heating medium-sized city apartments, this appliance is quite suitable. Especially considering the cost of 5 thousand rubles.
Setting the device
It is worth noting that with rare exceptionswall heaters allow for floor installation. For this, a complete base with wheels is provided, which can be integrated into the housing or disconnected. Wall mounting method initially involves the creation of holes at the points of attachment. As a rule, the functions of bearing elements are assigned to brackets, which are also included in the kit. The holes are created by an electric drill, after which a metal profile is mounted on which the body of the wall-mounted electric convector is mounted on the back side. Installation in a simple way does without special pads and profiles - it’s enough to screw in 2-4 screws and hang the device design through the grooves of the rear panel. In advance, you should also calculate the points of connection to the network. A thermostat should also be located near the convector.
Positive feedback on electric convectors
Practicality in many different ways put inplus this heater first. And this is logical, given the compact size, stylish design and ease of management. Such devices do not cause domestic inconvenience, as it happens with traditional systems like boilers and massive floor heaters, which physically interfere, require the installation of communications, cables, etc. Such troubles are absent in the operation of a wall-mounted electric convector for heating. Reviews emphasize the features of the principle of work. Modern devices of this type do not just raise the temperature without burning oxygen in the room, but they can also adjust other microclimatic parameters by adding healthy functions.
Negative feedback
Perhaps the most significant weakness inMost cases become modest performance. A thin elegant panel is unable to provide heat to large rooms, studios and halls of more than 30 meters2. Of course, there are modifications to solvesuch tasks, but in this case the owners point to reinforcement and other shortcomings. In particular, this applies to high energy costs. And if compact electric wall-mounted convectors with a power of 500-750 W may well fit into the list of utility costs without a noticeable load, then models for 2000 W and more, especially under intensive operating conditions, cannot be called economical.
Conclusion
Household heaters, in principle, not worth itconsidered as a complete source of heat supply. Radiators, oil heaters, infrared panels also belong to the auxiliary devices, which only partially compensate for the main heating tasks. Economical wall-mounted electric convectors up to 1000 W are advisable to acquire as an attractive source of heating in the local area. Such a device will not fill the apartment completely or even a large room with heat, but as an ergonomic addition to the heating system at a particular site will be the best choice. It remains only to determine the design performance, the nuances of management and opportunities for installation. It is important to bear in mind that a wall installation is more often associated with stationary use of the device, but the same reviews also point out the benefits of a multifunctional design, which, if desired, can be easily dismantled and, for example, put on wheels.
