Lightweight slabs: advantages, features of production and installation

Lightweight floor slabs are veryhigh-quality alternative to standard reinforced concrete structures. They are increasingly used, as a rule, in one-story construction. The fact is that they have a lot of advantages:

- low weight (the load of the overall structure decreases, therefore elements can be used even if the building is built on weak ground);

- the possibility of increasing the span (it can be made shorter or longer, in addition, the floor becomes slightly higher, because the thickness of the slab is reduced);

- exact dimensions (many types of elements are manufactured in production);

- quick installation (you just need to hire a crane and an experienced specialist);

- good quality and high performance;

- excellent noise isolation (for this it is necessary to leave the holes inside the plate empty or fill them with insulation like mineral wool);

- Saving money, materials and human labor (fewer components are used in production).

Lightweight floor plates can be usedfor the construction of all types of buildings, regardless of the material used. They have a different size and thickness, so you can choose the appropriate option for your building. In the production of the presented elements, high-quality heavy and lightweight concrete is used, which allows the construction to be made both light and strong. In addition, during manufacture, the product is further reinforced with reinforcement. And she does not allow the design to shift.

Lightweight floor plates help to buildlarge building for a short time. In doing so, you use a lot less cement and other materials. They cost much lower than standard reinforced concrete structures. Due to the fact that the presented elements have a small height, your ceiling will be several centimeters higher. However, it should be noted that they should be stored and moved very carefully.

Lightweight slabs need to be carefullyInspect at the time of purchase, so that you do not get cracked products. During installation, you should also be careful and careful. You need special equipment for the work, because, despite the lightness of the elements, you will not be able to lift them manually. Concrete products are fastened with concrete, therefore you have the opportunity to correct the position of the structure within 20 minutes.

Lightweight hollow core slabs requiredgood to connect with each other. To do this, they have special "locks" (semicircular grooves), which should be hammered with mortar. Further, in order to avoid the cold inside the room and the plate does not freeze, it is necessary to cover the connecting seams. This is done with the help of mineral wool and concrete.

Since the lightweight slab price is notis very high, and it fluctuates around $ 100-600 per piece (depending on size), then they are in demand in low-rise construction. The choice is yours!