From the beginner to the master: how to install the inner door with your own hands

On the question of how to install an interiorthe door with your own hands, to come out reliably and beautifully, you can not approach with the thoughts "maybe it will turn out" or "and so it will come down." Each detail, each nuance is important. Moreover, non-observance of some of them often leads to dismantling and re-installation. Naturally, this does not benefit either the doorway, or the doors themselves. Therefore, it is necessary to try very hard to do everything qualitatively and accurately from the first time. Although, putting his hand on the heart, it is possible to a few. But "experience is the son of difficult mistakes," and the current masters also started their way with uncertain steps.

It will be a question of installing swingdoors, the most common in residential apartments and houses. Their design is simple: the door leaf rotates around the vertical axis on hinges or staples.

How to install the interior door? First of all, you need to remove the old one from the hinges, dismantle its door frame and tidy the doorway in terms of the vertical alignment.

Unpacking the complete set of the door frame, veryit is advisable not to touch the packaging of the door itself - this is its natural protection against careless movements and actions. Only the box (in the form of a large letter "P") is going to be assembled. At the same time, all geometric distortions and irregularities must be guaranteed. If they come from plugging plastic inserts, future fixing elements, then before installing the interior door with your own hands, the door frame must be aligned using a hammer and a wooden bar that will protect from the impact of the surface of the parts. The lower part of the letter "P" must be fixed with a wooden bar.

After two measurements of the height of the doorway (onemust also take into account the height of the threshold), the door frame is adjusted for it by cutting the bottom of the end saw. Only now, the still-packed door leaf tries on the resulting design. Otherwise, how to install an internal door with your own hands, if you do not see the success of the assembly of all its elements?

There comes a very important moment:in the prepared opening the construction of the door frame is established. Installation must be carried out perfectly smoothly, without the slightest distortion. For this, the process requires constant checking and rechecking the plumb and the building level for parallelism and perpendicularity to the plane of the doorway. The final mounted door frame is fixed with screws in plastic dowels inserted into the wall. But screwing up the screw is dangerous - the box can be deformed.

However, the opening and the door frame are still visiblelook sloppy. The gap between them is filled with mounting foam. While it freezes, before you install the inner door with your hands completely, it must be provided with a lock, handles and hinges. The first thing is adjusted very carefully, without any hurry. Otherwise, in the end, you can get a broken lock, and a damaged door. Again and again, it is checked that the mechanism works without jamming and delays, and most importantly - that it exactly matches the markings on the door leaf and on the case of the box.

By the time all the works with the door are completedthe mounting foam finally freezes. The box is supplied with loops, in it a niche is made for the entrance of the tongue of the lock. Final - hanging the door leaf on the hinges. Only now it can be unpacked, and it will appear in all splendor.

To really know how to properlyput the interior door, you need to learn and practice, there is no other way. The achieved success will surpass the wildest expectations. And the time will come when the former student himself will become a teacher.