Every modern car is nowstaffed cigarette lighter. This item is good because you can connect to it absolutely any electronic mechanism, whether it is charging for a mobile phone or a portable compressor. The mechanism is a kind of "socket", which is connected to an additional device with a capacity of up to 12 volts. Also, for safety reasons, many motorists purchase a special cigarette lighter fuse. But what protection does it give to this mechanism, and how effective is it?
Functions
As we noted earlier, the cigarette lighter itself -This is a small "socket" in which you can connect any device. However, if their voltage will exceed the maximum permissible norms, then the threat of breakdown of the whole mechanism is created. To prevent this, there is a fuse cigarette lighter. In case of increased risks, it stops the power supply to the electronic device. Both mechanisms in this case remain intact and unharmed.
What devices should not be connected, so that the cigarette lighter fuse does not work?
There are no secrets.The main thing is that the system does not connect too powerful devices, such as a coffee maker, electric kettle and minisink. When these devices are in operation, the cigarette lighter fuse may operate after a few seconds, turning off the power to the tool. Well, if everything ends that way. When similar elements are connected to the cigarette lighter without a fuse, it is possible that the item simply closes or burns. Therefore, the maximum that can be connected to such "sockets" is the chargers of a cell phone or laptop (that is, low-voltage devices).
Where is the cigarette lighter fuse located?
This item must be locateddirectly in the relay and fuse box. For the convenience of diagnosis and repair, some motorists place it in a small plastic box in the cabin under the steering column. In general, this element can be placed in any part of the car: in the trunk, under the hood and even under the rear row of seats. The main thing is that the mechanism itself is in the relay unit.
What to do if the cigarette lighter stops working?
First of all, pay attention to the fuses.Often, they provoke the failure of the entire part. But what kind of fuse on the cigarette lighter to install to eliminate the damage? It's simple. First we open the box unit and on the back of the cover we find the corresponding part number, following the instruction manual. He is one, therefore it is pointless to look for other details. If you have visually determined that it has burned out, replace this part. By the time it takes no more than one minute.
However, if the cigarette lighter fuse isserviceable, do not panic. Look at the condition of similar parts located near the "outlet". These fuses can also fail. But if this did not work, you need to look for damage in the wiring or in the cigarette lighter itself.
