Процесс замены салонного фильтра, можно сказать, overgrown with incredible rumors. The procedure is very time consuming and it is necessary to understand everything clearly to get to the filter. Oxygen enters through the heating and air conditioning system into the air cleaning system itself.
Very important detail on the "Ford Focus 2" - Salonfilter. Replacement is carried out regularly every 20,000 thousand kilometers. Regardless of the mileage, replace the deformed or damaged filter. Note that the part cover is located in the cabin, directly below the instrument panel. The process of replacing parts is somewhat simplified if you put the original filter in the car - the reviews of the owners of the car indicate exactly this moment. The fact is that the original filter is easily twisted, it is elastic, so it bends easily. This greatly simplifies the installation process. And the most important thing is that after it is released it immediately takes on its initial form. All this allows the owner to not remove the gas pedal. If, however, the pedal is removed, then it is best to change the crimped standard nuts.
Filter Replacement Reports at Ford
So that the air inside the car becomesbetter and cleaner, you must regularly replace the cabin filter. You can also insert a carbon filter at the time of the next replacement. How to change the "Ford Focus 2" cabin filter? Replacement is as follows.
Initially, unscrew the three nuts, and removegas pedal. Thanks to this simple procedure, we lift it up and try to push the sneaker behind the steering shaft. The filter is here and hiding. The following is an absolutely simple procedure. We unscrew the screws, detract the far side of the fastening of the cover in the direction of the pedals and remove it. We take out the old, failed filter and install a new element of air purification. Now put the filter cover in place. Due to the inconvenient location of the upper screw it will be difficult to fasten. At this time of installation, you will have to spend some strength and nerves.
How to facilitate the process of installing the filter cover?
You can resort to improvisation. Try not to tighten the upper screw at all. Limit yourself to the bottom two. Then gently set the gas pedal to its rightful place.
Сколько времени при замене требует на "Форд фокус 2 "cabin filter? Replacing this part will take about forty minutes. It can be said that the cost is a penny, but the air in the cabin has become much fresher and better. Repair of the Ford Focus 2 ″ is time-consuming, but the result will be excellent as Freshness in the cabin is always pleasant and the driver and passengers.
How to replace the filter and do not remove the gas pedal?
How to upgrade the "Ford Focus 2" cabin filter? Replacement is made without removing the gas pedal.
Для этого следует "вооружиться" ключом 7/10 (blocking plan), bedding and flashlight. The gas pedal is mounted on three nuts. With a little effort, you can reach the mounting nuts on the filter cover. In such a position it will be difficult to turn the key, but “art” requires sacrifice. To facilitate the task, it is necessary to unscrew the screws. Then remove the cover and easily remove the Ford Focus 2 cabin filter. New filter in place is not so simple. Most importantly, try to squeeze it harder and shove it into the intended place. After that, the new cabin filter for the Ford Focus 2 is ready. The cabin filter, as the name implies, cleans the air from the air conditioning system and ventilation. If we compare it with other cars, the repair of the Ford Focus 2 is a rather complicated, time-consuming and not quite simple process. However, the car has its advantages, namely that the cabin filter for the Ford Focus 2 is not at all expensive and is a practical and versatile part. It is easy to find in any car supermarket.
Removal and replacement of lamps in the front of the vehicle
Repair of a vehicle like FordFocus 2 "is quite a serious matter. What to do if you only need to replace PTF lamps? To do this, you need a Phillips screwdriver. Open the hood and unscrew the bolt on the front headlight, press the retainers. After this procedure, you can remove the headlight and move the wiring to the side. This will provide access to the headlamp. Turning the light element towards the wing, you can take it out. Push the terminal and easily remove the lamp. Replace it and assemble everything back. This procedure takes about twenty minutes.
Removal and replacement of anti-fog lamps
To replace the fog lights you will needflat screwdriver and torx key T25. First, you should pry the screwdriver cap of these headlights. Next, they must be removed and unscrew the two bolts by resorting to a key. We take out the old fog lights and disconnect the terminal from the lamp. Replace and install everything in its place.
