Personal computer for communication with othersdevices require a compact and fairly fast I / O port. At one time, this function was performed by the so-called COM-port, which has a number of shortcomings. First of all, developers did not suit its size, while speed was a secondary concern. Also a good option at that time was the use of LPT, which has remained unchanged until now. This is where the printer connects. Can you imagine what size a USB flash drive needed to be created in order to use this connector? Nevertheless, it has survived to this day and is characterized by high performance due to the use of a parallel data transfer protocol.
On the principle of the mini USB-port does notis different from his big "brother". Structurally it is made of two power wires and two, intended for data transmission. The wires are twisted into twisted pairs for
The data transfer protocol is serial, and itselfthe process is controlled by a special controller. The speed of this method of communication is sufficient to ensure the stable operation of electronics.
The power wires embedded in the mini USB connection perform two useful functions at once:
- First, they stabilize the process of data transmission. This is due to the fact,
that the magnetic field, which creates a twisted pair from the power source, has a constant component. It prevents the penetration of foreign interference into the "information" wires. - Secondly, the mini USB connector allows you to "power" low-power devices, for example, recharge your mobile phone.
An alternative to such a connection is wireless communication, for example, Bluetooth or Red Port, but they all lose wire connection in speed and noise immunity.
Sufficiently promising direction in developmentA mini USB connection is the development of new controllers working with increased clock speed. This increases the data transfer rate. Further miniaturization will depend on the design features of the instruments. It should also be taken into account that the optimum port sizes are directly related to the maximum current for the power wires. On this depends and the maximum power when recharging electronic devices.