Clock "AMST 3003": instruction, setting, photo

In the instructions for setting the clock "AMST 3003"It is indicated that the device is equipped with a Japanese mechanism Miyota, which is distinguished by a high strength indicator, moisture resistance, wide functionality and excellent appearance. This accessory perfectly emphasizes the status of the owner.

Description

Инструкция по настройке часов «АМСТ 3003» гласит, that the strength of the product is ensured by the quality materials used in manufacturing. The body part is made of sturdy stainless steel, which can withstand considerable mechanical loads. Scratch-proof mineral glass is not subject to scratches, protects against moisture ingress of dust. Depending on the modification, the element is able to withstand pressure from 3 to 10 atmospheres.

The considered model is equipped with a wide additional functionality that includes the following options:

• The calendar.
• Alarm clock.
• LED backlight.
• Glowing fluorescent hands.
• Stopwatch.

Each kit comes with instructions for setting up the AMST 3003 watch, which allows you to maximize the use of accessory options, as well as to avoid disruptions during operation.

Care and Wear

The manufacturer recommends for cleaning glass andCorps use dry or slightly wet wipes of a soft type. It is acceptable to use neutral detergents that do not contain abrasives and solvents. It is necessary to exclude adhesives, oil and alcohol solutions, paints, varnishes, alkalis, acids on the watch. To increase the life of the belt, it should be protected from excessive moisture, dry air, frequent temperature changes, contact with aggressive chemical components.

The instructions for use of watches AMST 3003 provide for a number of measures to extend the service life of the product. These include:

• Protection from long exposure to sunlight.
• Exclusion of mechanical effects, including shocks and falls.
• Do not expose the watch to critically low or high temperatures.
• Store the product in a dry place.
• When worn, the strap should not overtighten the wrist, leaving a noticeable mark.

Watch "AMST 3003": instruction

Setting up the instrument involves replacing the batteriesoccasionally. The lack of power is indicated by the lag of the watch hands. Do not be surprised if this happens shortly after purchasing an accessory. The fact is that the manufacturer completes the products with test batteries. To replace the battery, you will need to open the back cover of the case. This work is better to entrust a professional.

The user manual for the watch in question indicates the degree of water resistance. Below are these values:

• The three “atmosphere” model withstands moisture ingress when washing hands or during rain.
• Five "atmospheres" of water resistance allow you to swim and dive to a shallow depth.
• 10 "atmospheres" provide the opportunity to dive under water to a limit not exceeding the same indicator.
• The metal used to create the product does not give in to corrosion, does not oxidize and does not rust.

Time setting

Текст инструкции по настройке часов «АМСТ 3003» states that the installation of the exact time should be carried out using the buttons located on the sides of the case. Manipulations are carried out in the following order:

• To enter the "menu" setting time, you need to press three times on the button, which is located below on the left side.
• The selection of minutes is done by pressing the key once, located at the bottom of the right side of the case.
• Minute correction is performed using the right upper button.
• Then the lower right button is activated again to select the clock.
• The total time format is set by fixing the top right button.

In the hours in question, both 12-hour and 24-hour mode are available. His choice is made using the bottom left button.

Date and days of the week

The instruction for setting the clock AMST 3003 implies the following manipulations on setting the date:

• They perform three presses on the lower left button, after which they press the same button on the bottom right. After that, a flashing date symbol should appear on the screen.
• The readings of the number are adjusted with the right upper button.
• Press the right bottom key.
• Expose the desired month through the upper control on the right.
• Activating the bottom left button returns the clock to the current operating mode.
• You can view the date by pressing and holding the key at the top right.

The current day of the week, according to the instructions for setting up the AMST 3003 clock (photo below), is set as follows:

• Press the lower button on the left three times, then repeat the process with the lower right analogue five times.
• The right key at the top allows you to adjust the electronic arrow (it will flash in the part indicating the days of the week).
• Fixing information and returning to the operating mode is performed with a single press of the lower button to the left.
• The names of the days are indicated in abbreviated English transcriptions.

Alarm clock

The sound of the alarm on the hours in questionconfigured in automatic mode. You can disable it by simultaneously holding the two right buttons. That the alarm clock is turned off will be indicated by sound. In normal mode, you can return after pressing the left button below. Information about the set alarm parameters become available after activating and holding the lower right button.

As written in the AMST 3003 instruction manual, the alarm is configured in the following order:

• The left bottom button is pressed twice.
• Set the required readings of the clock using the right key on top.
• The lower right button is activated.
• Exact indicators about minutes are adjusted by the upper button on the right.

Additional functionality

Watch AMST 3003, instructions for use of whichpresented above, have a backlight function on the LEDs, which is activated by the upper key on the left. The device is transferred to the stopwatch mode by pressing the lower left button. It also serves to stop the testimony. You can reset the information by pressing the button at the bottom right. If the stopwatch sector flashes periodically, this indicates the normal operation of the mechanism and sufficient battery power.