В этой статье попробуем рассказать о том, как connect the computer to the TV through the "tulip", we denote the main points and presetting of the plasma panels and LCD devices. The synchronization procedure may differ in some cases, but mainly depends on the type of computer video card, the operating system installed and the TV model.
In addition, there are quite a few important moments that will affect the quality of synchronization and its speed.
Why does the TV have a computer?
Before telling how to connect a computerto the TV through the "tulip", answer this question. To start, take a look at the usual monitor screen and take a look at the TV display. The latter, as a rule, wins significantly with a larger diagonal and is not somewhere in the corner on the desktop, but opposite a comfortable sofa or armchair, where it is easy to fit, if not a big company, then a friend or girlfriend.
View videos, photos and gaming leisure - allit looks much nicer on the TV screen than on a modest monitor: there is no need to peer into the details, use the speakers, and personal PCs have not yet got the remotes.
Самая частая причина, мотивирующая владельца Connecting the TV to a computer via an RCA cable (“tulips”) is watching movies. But in fact, on the LCD screen, you can display the same picture as on the monitor. And it is not necessary that this was a film. Therefore, do not forget about photos, Internet and games.
All kinds of auto and aircraft simulators, arcades,Shooting and even strategy feel great on the big screen, and playing time becomes really enjoyable. Also, no one forbids you to surf the web without getting up from a comfortable sofa.
Synchronization
Before you connect the computer to the TVthrough the "tulip", see what connectors are in the video card, and which - on the TV. A video accelerator is responsible for outputting a video signal from a PC; its connectors can be easily detected by a connected cable from the monitor. Communication interfaces of the TV can be found behind, on the side or even in front of the device, but in any case it doesn’t hurt to look into the instructions.
There are not so many types and varieties of interfaces with connectors. Let's try to identify the main types that are most often used on video cards.
Graphics card connectors
D-Sub, or the VGA connector to which it is connectedstandard monitor. It is available on almost all video cards (especially from MSI), with the exception of the latest generation models, which use more modern switching outputs. VGA-interface is differently called analog output from which the same signal is transmitted.
DVI-Iand in some cases with the prefix D isan advanced output that works with both analog monitors and digital monitors. In models of past years, this interface, as a rule, is adjacent to the analog VGA output, and some manufacturers pack their video cards with a special adapter-adapter like DVI-D-Sub, if the ruler was not equipped with this connector.
S-video - not less popular interface along withprevious connectors. It is widely used in many areas, which, by the way, sometimes have nothing to do with computer video equipment. Connecting a computer to a TV via RCA ("tulip") through this connector allows you to get a sufficiently high-quality video signal.
Modern ports
HDMI – это самый новый интерфейс, который используется to transfer high-definition pictures, ensuring maximum quality of video and audio. A really clear and rich image can be obtained only thanks to this output, in other cases the work with a large diagonal is saturated with visible pixels that are not entirely pleasing to the eyes.
TV connectors
RCA-interface, or composite connector type "tulip"- This is an outdated way out, but due to its wide popularity it is very common in everyday life. Before connecting the TV to a computer (the best ways are D-Sub and S-Video) you need to find a special cable. The scatter of the wiring is quite simple and differs in color: one - on the image, and the other two - on the sound (left and right channel).
S-video. Если использовать этот интерфейс при synchronization with a similar output on a video card, then, of course, no adapters are needed, and the signal will go without interference and obstacles. In case of a mismatch of switching, you can find a VGA-S-Video adapter.
Scart - this is a relatively old interface thatcan simultaneously transmit both audio and video signals. Its main purpose remains to connect a video player or other similar player. To synchronize with a computer, you will need an SCART-D-Sub or SCART-S-Video adapter.
Modern interfaces
HDMI - this is, as mentioned above, the mostA quality option for displaying pictures on the screen, and if your video card and TV are equipped with this connector, you can safely use synchronization without any restrictions. For synergy quite inexpensive adapter type HDMI-HDMI.
General recommendations
Before you connect the computer to the TVthrough the "tulip", make sure that you have the above connectors match, otherwise get a special adapter, the benefit is that in the computer market all kinds of adapters, including the most exotic, abound. The only thing with which the adapter is bad is that it is able to degrade the picture on the TV screen by changing the signature.
Switching cables can be bundled with both the video card and the TV itself, so carefully examine the completeness of both devices before connecting the computer to the TV.
The review of cables and interfaces showed that the most acceptable adapters and, accordingly, the types of connections are as follows:
- D-Sub (VGA) - DVI-I.
- D-Sub (VGA) - SCART.
- S-Video - SCART.
- DVI-I - SCART.
In other cases, the signal is highly distorted, the picture suffers, therefore experts do not recommend using other methods of switching.
There is no need to save on connecting cables. Cheap material and an unknown manufacturer guarantee low noise protection, which will significantly reduce image quality.
If you are plagued by doubts about the choice ofor another way of communication, you can look through the official forums relating to your video card or TV model, there certainly will have technical support questions / answers on synergy with popular device lines.
Audio signal
Most motherboards useStandard connectors for audio output type TRS 3.5 mm or, alternatively, the "mini-jack." Before you connect your computer to the TV via RCA, make sure that the audio output on your devices is equipped with just such interfaces, otherwise you will have to additionally buy a special adapter.
The same goes for connecting throughSCART and S-Video interfaces. In the event that your TV is equipped with a separate audio system, there should be no connection problems at all. Such systems are always equipped with popular connectors that do not need an adapter or adapter.
And one more important advice:All operations for connecting / disconnecting any equipment to both the TV and the computer must be carried out with the power completely turned off. Only after all the wires and cables have found their place and are firmly seated in the connectors, you can turn on the equipment and go to the software settings.
