Many of us even occasionally have to callon multichannel telephones to a variety of hotlines. With a mobile phone, this is easier, but sometimes more expensive, because the operator starts to read the money from the beginning of the connection. First, you listen to the answering machine message, which prompts you to choose which specialist to connect to, and then in some cases will have to spend more than one minute on the line waiting for the operator to respond. It is more advantageous in this case to use a stationary device, but in this case it is necessary to decide how to put the phone into a tone mode.
Phone Operating Modes
There are two ways to work the phone -pulse and tonal. Talking over a multi-channel number is possible if you turn on tone mode. By default, old telephones and PBXs support pulse dialing. Modern digital telephone exchanges and more advanced phone models are tonal. To determine how your phone is configured by default, you can, if you hold the receiver to your ear and listen to the sounds in it during dialing:
- At the phone, which is set to pulse mode by default, you will hear characteristic clicks, the number of which corresponds to the dialed digit.
- In the tonal mode, a characteristic sound signal will be heard in the dynamics.
If you heard the sounds described in the firstIn order to make a call to the hotline, you need to know how to put the phone in tone mode. However, it should be noted that owners of disk phones do this without buying additional equipment can not.
How to find the instructions for the phone
First of all, when we need to study a newfunction of any thing, we refer to the instruction. It comes with any equipment. In it you can find a lot of very useful tips, including how to put the phone in a tone mode. In the event that the user's manual is lost with the box or it was not originally, it is worth using the tips suggested later in this article.
The easiest way to put the phone in tone mode
Sometimes, for objective reasons, it is impossible to finduser's manual, or it can contain only a technical description of the model, and the functions are revealed very poorly. In this case, use a simple and proven way to switch to tone mode.
Once you have dialed the number and you are connected topress an asterisk (*) and hold it for a couple of seconds. Usually this is enough to immediately go into the necessary mode. If the transition does not work, then it's worth trying again. If the transfer procedure is successful, you can enter any extension numbers. However, every time you call, you will need to do this procedure.
Tone mode of the Panasonic phone and its features
Previously, other companies were thinking about introducingPanasonic's specialists in voice mode. It's no secret that the spread of it everywhere is just a matter of time, an increasing number of automatic telephone exchanges use digital technologies, and organizations create multi-channel numbers for convenience. Before you move the Panasonic phone to tone mode, review the unit carefully. On some models, you can see the "tone" key or the "pulse-tone" switch. The switch must be set to "tone" mode, and the key is simply pressed.
Modern radio telephones of this brand by defaultprogrammed to the tone dialing mode, and additional settings are often not necessary to enter. If the program is knocked down, then with the help of instructions it is easy to fix it.
