Inflatable boat "Taiga" - it is economical, easyand reliable watercraft, which is produced by the company "Leader" from St. Petersburg. The product has a good layout, security and affordable price. The ship is not inferior in terms of gliding and seaworthiness to many similar modifications. As a rule, small power units with a capacity of up to ten horse forces are used for movement. The device is made of PVC materials and can be operated without registration in the department GIMS.
general information
Лодка «Тайга» оснащена корпусом, основа которого made of inflatable PVC balloon, the density of the material is 750 grams per square meter. The skeleton itself was constructed from trapezoidal parts, which made it possible to reduce the cost of the vessel and save on component parts. Joints and connections are fixed by welding and taped with a polymer tape. In diameter, the balloon has 380 millimeters.
The inside of the boat is divided into threeindependent sectors. The watercraft under consideration is being produced in several modifications, which differ in the configuration. All models are designed for movement on water with the help of oars or a mounted motor. The vessels are equipped with a flat tensioned bottom and a rigid-type deck of composing 9-mm lamellae. Payol is an H-shaped aluminum profile.
Boat "Taiga-320": characteristics
Structurally swimming means madeaccording to the standard scheme: PVC inflatable balloon, wooden deck elements made of plywood treated with a waterproof coating, oars and guides are made of lightweight and durable aluminum alloy.
Main characteristics of the PVC boat "Taiga-320":
- width / length (m) - 1.42 / 3.2;
- the diameter of the cylinder (mm) - 380;
- capacity rating (kg) - 380;
- capacity - three people;
- recommended power for the hinged power plant (p. p.) - 5-10;
- product weight (full) - 36 kg.
It may be noted a good complete set of boats. It includes:
- inflatable boat;
- four slants;
- two longitudinal and a pair of transverse guides;
- pump pump with a sleeve, oars;
- a pair of seats, two packing bags.
In addition, each set is equipped with a repair kit, first-aid kit and instruction manual.
Boat "Taiga-270"
Domestic motor-rowing modification withstationary transom is a universal vessel for calm waters. The package includes a pair of hard seats, collapsible paddles, rail rope, providing additional safety for passengers. The stern and bow of the boat are equipped with handles for transportation, a transom of stationary type of waterproof plywood, rigidly fixed on the cylinders. Sections are connected with an aluminum profile, the flooring board is made of Finnish waterproof plywood. Also included is a passport, repair kit, pump and packing bag.
Dimensions and characteristics of the boat PVC "Taiga-270":
- length / width (m) - 2.7 / 1.25;
- product weight (kg) - 28;
- the maximum load capacity (kg) - 220;
- capacity - two people;
- maximum power of the outboard engine - five horse power;
- dimensions in packaged form (mm) - 1005/500/350.
The material of the ship is resistant to rotting, corrosion, salt water, can be operated at temperatures from -40 to +60 degrees.
Assembly and disassembly
Boat "Taiga" in preparation for the work goingin the sequence specified in the instructions. From the correctness of this process depends on the durability of the product. Manipulation is performed on a flat clean platform. Slans and stringers should be mounted according to the marks on them.
Накачка воздуха выполняется штатным насосом или model approved by the manufacturer. It is necessary to exclude the use of compressors, as this can lead to excessive inflation and deformation of the seams. The process should be distributed evenly across each compartment.
It is necessary to clean the air in a timely manner.valves that are responsible for tightness and are equipped with special springs. Inflatable boat "Taiga" before disassembly should be clean and dry. It is not recommended to pack the product in a wet form, as this is fraught with deformation of the kit.
Operational nuances
Visiting a reservoir, especially unfamiliar, it is desirablefamiliarize yourself with its features and swimming conditions. The first thing after assembling a PVC boat is to inspect it for damage. Minor repairs can be made using the standard kit.
It is better to postpone the journey on the ship with a largewave or strong wind. The load is placed evenly over the cockpit compartments. If the trip is planned alone, the best place for it will be the bow. Do not exceed the manufacturer's recommended passenger capacity and carrying capacity.
If the movement is carried out usingoars, the rower should guide them smoothly and evenly, checking the reliability of fixation in the keys. Boat "Taiga" is not intended for use of a motor with a capacity over 20 liters. with. Ignoring this point can lead to loss of control, especially when passing through bottlenecks, reefs and sandbanks. In the event of a sudden change in temperature, it is advisable to check the pressure in the cylinders and bleed or bleed air if necessary.
Reviews
Most users have noted that inflatablethe boat "Taiga-320" has high quality workmanship with smooth, unbeaten seams, reliable fixation and practical components. Excellent performance gives the ship in rowing mode and on the motor. The necessary rigidity is provided by durable cans and slants. The assembly of the boat takes no more than 15 minutes.
Some owners have noted the inconvenience of packaging.boats in two bags, as well as the absence of additional protection of the hull, which requires special care in places where there may be sharp stones or plants with spikes. Another minor drawback is the fact that when in cold water after 15-20 minutes, the stringers need to be further set down, after which the floor becomes even and hard. In general, the product in question is a universal, practical and inexpensive boat that meets modern parameters.
