Appearance depends not only on the quality of clothesand its conformity to fashion. One of the main points is the neatness of the worn items. A shirt is one of the important accessories in the wardrobe of any man. It should be a quality item that matches the occasion. But its appearance depends on proper care. Wash your shirt in accordance with the instructions on the label. But it is also important how to iron the shirt properly.
First of all, it is necessary that the iron was with a surface of stainless steel. It will be better to slide on the surface. It is better if the iron has a steaming function that may come in handy.
Before ironing a shirt, you need to determine what type of fabric it is sewn from. This is very important, and the ironing mode depends on it. This information can be read on the tag.
As shown, it is most convenient to ironshirts, which consist of a mixture of fabrics. This is cotton and polyester. Choose a temperature of 110 degrees and lightly pressing on the iron, iron the thing. At the same time the mode of steaming is not required or is required in small quantities.
Viscose items are also easy to clean. They are ironed at a temperature of 120 degrees and not strongly pressed on the iron. Water stains easily remain on this material, so only steam should be used.
Harder to iron organic cotton shirts. Here it is necessary to make more effort, at a temperature of 150 degrees and a large amount of steam.
The same requirements apply to ironing cotton and linen shirts. Only the heating temperature of the iron should be set at around 200 degrees.
Linen things also require a strong pressure on the iron and a temperature of 230 degrees.
Shirts made of compressed fabric are ironed at 110 degrees and without using steam.
Well, and finally, a few recommendations, likecorrectly iron a shirt of dark fabric. In order not to leave traces of iron on it, it is necessary to iron it from the wrong side. But if there is a need to iron the fabric from the face, it is better to use only steam or barely touch the shirt with an iron.
Having dealt with the type of fabric, go to theironing process. I must say that ironing shirts is better if they are not slightly finished. But in the case when the fabric is overdried, you need to use additional moisture. For this fit spray.
Moisten the cloth thoroughly. First of all, iron small parts. Begin with a collar. It is stroked from the corners to the base on each side.
Then go to the sleeves.You can use a special device for smoothing the sleeves. If not, put the sleeve on the ironing board and level it well. Now start driving your iron from the middle to the edges along the lobe. Ensure that no wrinkles are formed. Cuffs also need to iron.
Next, we put the shirt on the ironing board with the back side facing up. We iron her fabric. The fold in the middle, make symmetrical.
A story about how to iron a shirt,almost complete. It remains to iron the shelves. We spread one of them on the ironing board and gently ironed. We stroke the shelf with buttons without touching them. Otherwise, you can damage the buttons with an iron.
If you have taken into account all the recommendations on how to properly iron the shirt, then as a result you will get a perfectly ironed thing.
Now you need to hang it on a hanger, not putting it in the closet, and let it cool. After that, you can safely send it to the closet.
And finally, another rule. It is considered bad form to smooth down the arrows on the sleeves of a shirt. Therefore, if you are not going to wear a jacket on top, then smooth the sleeves without arrows.
Ironing a shirt is not difficult. But you need to show a little patience and care so that it does not leave any traces of the iron or burned places. In this case, the shirt will be hopelessly flawed.
