The heating cable "DEVI" is used forprotection of pipelines from freezing, freezing of ice and snow on roofs, in drainpipes and gutters. In addition, it is used to maintain the required temperature in hot water systems, technical installations, as well as to create a system of heated floors in residential premises. The main feature of such products is the ability of self-regulation of temperature, that is, the heat transfer is reduced or increased depending on their heating.
Heating cable "DEVI": principle of operation
The entire cable length between parallelThe conductors (copper) are temperature-dependent composition of the resistance - coal polymer. When the product is connected to the 220 volt network, the current passing through the coal composition heats it. As a result, the polymer expands and the distance between the coal particles increases, and this leads to an increase in resistance. As a result, the current decreases and the heating (power) decreases. This principle is based on the effect of self-regulation. The heating cable "DEVI" is also interesting in that the heating is controlled separately along its entire length, taking into account the ambient temperature at each site. If the external temperature increases, the power released by the cable will decrease. Due to the described effect, the heating cable "DEVI" is protected from overheating of individual sections, where the temperature is higher. Thanks to the parallel connection of the supply voltage, it is possible to shorten it anywhere. This greatly facilitates installation and design. When calculating the use of such cables, it is necessary to observe the maximum power parameters for various temperature conditions.
Software and hardware "DEVICOM PC PRO"
Using self-regulating heatingcables, together with the specified software and hardware, you can fully control the heating in your home. Thanks to this device, you can control the system settings and thermostats that work on the network using an ordinary personal computer. Thus, it is possible to set the temperature mode of the floor separately for each room, install heating of the roof and drainage channels, protect water and heating pipes from freezing. All information about each such object will come to your computer.
Such software and hardware will be veryconvenient and for workers who carry out installation work on the installation of self-regulating heating cables. The device will be able to detect system malfunctions.
This network connected system reads andanalyzes information from thermostats for several days. This allows you to determine the features of the operating mode of the system being tested and make a temporary heating map. Thus, you can choose the most economical power consumption for this object.
Conclusion
Use of a product such as heatingcable "DEVI", together with software and hardware complex "DEVICOM PC PRO" provides efficient heating in the apartment, house, office, in the industrial workshop, gym. Installing such a system is easy on any object, wherever comfortable heat is required. These complexes can be mounted both in new buildings, and at repair of old housing.
