/ / How to install Wi-Fi at home on their own?

How to install Wai-Fi at home?

The question of how to install Wi-Fi is notoccurs for organizations and banks. For such purposes, an agreement is concluded with specialized firms that solve this problem quickly and professionally. But when building a small home network it is more than relevant. The services of a specialist of such a profile are not cheap. Therefore, there is a desire to do this operation independently and at the expense of this save money. Moreover, there is nothing difficult here, and even a novice user can do it.

How to install Wi fi?

Installation order

The algorithm for how to install Wi-Fi is as follows:

  • We establish the connection of the router and other network components that are interconnected by wires.
  • Configuring the router.
  • Create wireless network connections.

Connecting the router

The first step in how to install Wi-Fi isestablishing all physical connections. The key element of the entire local area network is the router. It is from his switching that it is necessary to begin the execution of this operation. On its back side, there are usually five ports for connecting a twisted pair and one round socket for power supply. Four ports are yellow and one is blue. In the last set the input wire from the provider. We connect all devices to the yellow sockets that will be connected using a twisted pair. The second end of these wires must be installed in devices (TVs, receivers and system units, for example). First you need to prepare all cable products. Next, connect the power supply to the router, and then install it into an outlet.

How to install home Wi-Fi?

Configuring the Router

The next important step is how to installWai-Fi is setting the correct parameters of the router. To do this, we first connect it to a computer or laptop using a twisted pair. Moreover, the connection is necessary only at the configuration stage. Then, if necessary, it can be removed. Turn on the router by pressing the power button on the back side. Then we carry out a similar procedure with the system unit or laptop. After the download of each of them proceed to the next stage. Run any installed browser on the PC. In the address bar, enter 192.168.1.1 and press enter. Next should be a request in which you must enter a username and password. This information can be clarified on the body of the router or in the instruction manual. Then you need to set the parameters of the wireless network in the settings of the router - its name, password for access and encryption method. The first two parameters can be chosen at your discretion. But the last of them must be installed in the "WPA2" (this will allow you to get the maximum degree of network protection). Then the router is rebooted, after which it is ready to go.

PC connection

At the final stage you need to install Wi-Fi oncomputer. The most difficult to do on a stationary system unit. It is necessary to connect an external adapter to the USB interface. Next, install the driver on it from the CD that comes with it. In some cases, you may need to restart your PC. The next step is to launch the adapter. He will make a list of available connections. In it you need to select the one that was installed in the previous step. Then a window will appear in which you will need to enter a password. Then we wait for receiving the network address - and you can start browsing the Internet pages. On laptops, this operation is performed much easier. The adapter with the drivers in them is integrated and configured. Therefore, in this case, everything starts with a scan of the available connections. Then everything is the same as setting a stationary system unit.

Install wi-fi on your computer?

Conclusion

The article describes step by step howInstall a home Wi-Fi and configure it. Something supercomplex is not in this operation, and even the novice user can do it. Therefore, we take and safely do.