Beautiful sarafans: how to sew a summer outfit without special knowledge?

Today, various types of handicrafts are very popular, and sewing occupies a solid niche among lovers of manual applied labor.

Предмет нашего разговора - сарафаны.How to sew such clothes itself, without possessing special knowledge and skills? Let's try to consider the most simple options for sewing sundresses by the method of creating transforming dresses, the manufacturing process of which takes no more than an hour.

Sundresses: how to sew without skills?

Stock up on the necessary tools:

- scissors;

- flexible centimeter;

- a piece of chalk;

- ruler;

- pins;

- needles;

- thread;

- sewing machine.

First of all, you should equip yourself with the measurements of the figure on which you need to sew our product. It is enough to remove the circumference of the chest and waist, the length of the skirt from the waist to the bottom. And on this, perhaps, everything.

Let's build the most primitive basis - a skirt, two stripes on the chest and one on the waist.

Let's start with the construction of a flared skirt. It is based on the sun. Take a cut of fabric and cut out a square with sides (S), their length is calculated according to the following formula:

S = 2D skirts + 2R.

Such different sundresses ... How to sew an outfit based on the skirt of the sun

1. We fold a cut of fabric four times. From one corner of the resulting square, draw a quarter of a circle, which is equal to the radius of the waist notch R.
2. From the resulting line, put off another quarter of a circle with a radius that is equal to the length of the skirt (D skirt).
3. Cut the workpiece in circles.
4. We will process the bottom of the skirt with an overlock or we will sewknit band or any ribbon, lace to choose from. You can simply tuck in the hem and hem it or stitch it with a zigzag on the sewing machine, selecting a small stitch and pulling on the fabric. It turns out twisted edge.
5. Cut a strip of fabric, equal in lengthwaist circumference + 2-3 cm and a width of 6 cm. Let us bend this strip in half lengthwise and sew along the upper edge of the skirt - it turns out the belt, which closed the open cut of the skirt and decorated it.
6. We cut two long belts with which we will closechest and back. Their length can be arbitrary, but not less than 80 cm. More - any number, how much fabric is enough. Width - about 20 centimeters each. You can cut 40 centimeters, fold them along in half, stitch into tubes and twist. Then you will have a finished part with closed sections. If the fabric is not dense, then this is the best option.
7. Then they will need to be ironed, so that the seam of grinding the tube remains under the face. This seam strip will be applied directly to the body.
8. Making the top part of a sundress.Both strips in the already completed form are sewn to the waist of the skirt from the inside, close to each other. The loose ends will be thrown behind the neck and already on the back, arbitrarily intersect with each other in various combinations.

Another way to sew a dress without a pattern

Take two identical silk large shawlssquare shape. Cut the two edges of these shawls, laid out diagonally. Leave two small corners to be not stuck to the end. The height of the corners should be equal to the depth of the desired neckline from the shoulder to the chest cavity. Do the same from the opposite side. You should have a cone - wide corners of the scarves at the bottom at the hem and 2 corners at the top. As auxiliary accessories, use two straps that you sew to the corners on top. With their help, you will tie the straps of the resulting sundress. Or for the neck, or on one shoulder along the diagonal.

It turned out amazingly beautiful, bright, unusual outfit. Now you know exactly how to sew a sundress itself without any special education or rich sewing experience!