The decor of hair ornaments from year to yearis increasingly popular with fashionistas. A hairpin, a crab, a comb and an elastic band made of satin ribbons (hand made) are indispensable accessories for all occasions. They are suitable for creating both a romantic and playful image.
For the manufacture of such crafts widelykanzashi technique is used. She came from Japan and won the hearts of many needlewomen around the world. In ancient times, geishas adored decorating their voluminous hairstyles with hairpins decorated with unusual colors. Their petals needed to be added in a special way, the knowledge of which reached our time.
Kanzashi satin ribbon can bedecorated with flowers, butterflies and other decorative elements. We will understand in detail how to make petals, combine them into one whole and fix them on hair accessories.
Choose a base
Before you start, you need to choose the rightall necessary materials. Eraser of satin ribbons with their own hands should be created on the basis of the most suitable for this purpose jewelry. There are certain rules for choosing gum for decoration. Among the main tips are the following.
Pay particular attention to the material fromwhich produced an accessory. This is especially important for girls with long thick hair, because they need strong and reliable elastic bands that do not tear at the most inopportune moment. In addition, low-quality jewelry negatively affects the hair structure, making it brittle and weak.
Many girls prefer to buy stationerygum. They securely fix the hair and do not allow disobedient strands to break out of it. But to remove such an accessory, without tearing at the same time a considerable tuft of hair, is virtually impossible. Therefore it is better to abandon them, choosing the material for work.
Another option unsuitable for use -rough lined rubber bands with metal clips. They create too much pressure on the trunks of hairs, because of which they significantly damage the structure. Especially away from such accessories you need to keep girls with dry and brittle hair. Gum made of satin ribbons, made with your own hands, should bring joy, not suffering. Therefore, choose to create a softer and more gentle base.
For example, perfect for this purposesilicone gum. From her satin ribbons you can make any decorations for her with your own hands. It is both transparent and corresponding to the color of your hair. With its help, any hairstyle is quickly put in order, while the accessory is virtually invisible.
Despite all its advantages, thisThe material has one major drawback - fragility. You can decorate it beautifully, but it is unlikely that you will enjoy the result of your work for a long time, because an accessory can tear at the most inappropriate moment.
Optimal choice
Another good option is gum with specialcrochet. They are presented in various sizes and colors, perfectly hold the hair, do not pull out the strands behind you when you let your hair down. But they are very difficult to find both in the markets and in stores. If you are lucky to stumble upon such an accessory, immediately take it and boldly decorate it with crafts of ribbons.
Простой, удобный и доступный вариант – обычные gum made from soft fabric. As a rule, they are sold in packs of three. They are easy to get, and they do not create problems both when decorating and during further wear.
Итак, с резинкой мы определились.We now turn to the selection of other materials. Depending on what kind of decoration you want to make, you need to take the appropriate details. Consider some of the most popular workshops on decorating gum ribbons.
Lush flower
In order to make this lush and elegant flower and decorate your hair with it, you will need:
- satin ribbon of three shades of the same color (its width should be a quarter of a centimeter);
- one big bead and many small ones (it is desirable that they be golden or silver);
- ruler;
- Super glue;
- a circle of cardboard, with a diameter of 4 centimeters;
- scissors;
- the narrowest gift ribbon;
- and, of course, gum to match the working materials.
Work process
Cut satin ribbon of each shade into pieceson 10 centimeters. Make loops of them, twisting each piece in half and gluing the tips together. Then attach the cardboard to the rubber band and fix the finished petals on it. Place them in a circle, alternating between different shades. You can arrange them more rarely or more tightly - as you like best.
Now cut the gift ribbon into 4 fragments.12 centimeters each. Secure strips on the principle of rays of snowflakes. Here's how to make a rubber band from satin ribbons with your own hands. The master class further recommends applying another layer of colored eyelets and covering them with another batch of brilliant rays. At this time, cut the 8-centimeter strips and attach them on the same principle as before.
Now we come to the final stage of decoration.To arrange the core of the flower and at the same time cover all the joints from fixing the ribbons, glue a large bead in the center. And to give the craft extra volume and unusual, decorate the tips of the strips of gift ribbon beads to match her.
We connect to the leaves
Eraser of satin ribbons with their own hands can be decorated not only with a separate flower, but also with leaves for it. To work on this accessory you will need:
- monophonic satin ribbon, a quarter-centimeter wide;
- stripes of the same color, but with a pattern (they must be 1 mm larger than the main material);
- green ribbon (width - 0.25 centimeters);
- big rhinestone;
- a piece of glass;
- burner;
- iron ruler;
- Super glue;
- needle and thread;
- ordinary scissors;
- gum to match the main material.
First - the flower
Put a satin ribbon with a pattern on the glass, measure 5 fragments of 7 centimeters in each and cut them using a burner.
Fold the strips in half and connect the tips of each of them so that you have triangular petals. Lay them on top of one another and glue together so that each piece holds its shape.
Sew and tighten the rays at the base, so that beautiful oblong grooves appear inside them. Perform this operation with each petal separately.
Lay out the items in a circle and fasten them togetherusing thread. Pull on the ends and tie them tight. Then straighten the formed petals. You should have the first flower. A rubber band made of satin ribbons, made by hand, consists of two or more such tiers, so let's move on to work on the next one.
Work with monophonic satin ribbon start onthe same principle as in the previous scheme. But this time we will need 7 cuts of 9 centimeters each. Put the fabric on the glass, measure the required number of parts with a ruler and detach them using a burner.
Bend each petal with a triangle.Fasten the ends with glue and sew the base, tightly tightening the thread. Now collect them all together and securely tie them together. At this stage of work your gum from satin ribbons is almost ready. The master class, which describes the process of its creation step by step, further recommends merging the two layers together.
Now - leaves
Glue a flower with five petals on top onlythat made and go to the creation of leaves. They are made on the same principle as the previous elements. Cut off the green tape with 3 parts of 15 centimeters.
The tips of each of them should form corners. Glue them each piece, turn out from the inside out on the front side, and then combine the three finished leaves into one composition.
Attach them under the lower flower, and on the top, in the central part, attach a rhinestone. When the glue is dry, sew the craftwork to the gum.
Bows: blanks
What else could be a gum of satin ribbons? The master class (instruction) will tell how to decorate it with a bow. Make it even easier than a flower.
Для работы вам понадобятся три вида ленты разной widths: 3.3 centimeters, as well as 0.6 and 1.3. Each layer of crafts is made from a strip of a certain type. For the first level, you will need cuts of 18 cm each. For the second - 28 each, and for the third - 4 each.
Burn a candle cut edges of each piece,so they do not bloom. Now bend the widest tape in half, putting its tips in the center on each other. Sew the blank in the middle with a small stitch. Tighten it tightly and wrap the bow several times to better fasten it, and tie it.
We form bows
Now take a tape with a width of 0.6 centimeters and form from it the same shape, attaching it from above to the previous fragment.
After that, wrap the composition in the center with the remaining strip and connect its ends on the back so that they are not visible.
From the remaining cuts make the same bow.Sew both jewelry to elastic bands. To facilitate your work, you can pull the accessory on the cap from under the deodorant. So it will stretch, and it will become much more convenient to fasten decorative elements. Eraser of satin ribbons, the photo of which can be used as an example while working on new decorations, is ready. Wear it with pleasure!
