How to Cover the Roof with Metal Tiles by Your Own Hands: Features of the Process

If you do not know how to cover the roofmetal tile with their own hands, the material presented will be very useful for you. First of all, it is worth mentioning the advantages of this finish. So, the metal tile is durable, lightweight, durable and resistant to negative influences. In addition, it is sold in any store and has a low cost.

Now we turn to the question of how to covera roof metal tile the hands. First of all, you need to assemble the right tool: a drill, a hammer, a hacksaw, metal scissors, a Bulgarian. As for the metal, it can be of different colors, and also have a flat or corrugated surface. To calculate the required amount of material, it is necessary to correctly measure the total area of ​​the roof slopes and divide it into the dimensions of one complete sheet. The roof should be bought with a margin. It will be nailed to the crate with galvanized nails.

If you know how to cover the roofmetal roofing with their own hands, we must not forget about the main requirement for using the presented material: the roof slope must have a minimum angle of inclination of 14 degrees. Now you can start preparing the base foundation, that is, the crates. It should be made from smooth wooden boards 3 cm thick. Naturally, all wood elements of the crate and truss system must be treated with an antiseptic. Further on the surface is waterproofing.

If you have already read how to cover the roofmetal tile with your own hands, do not forget to decide which side you will start laying. Naturally, the first row of sheets fits from the bottom of the ramp. In this case, you should mount it so that the edge of the metal tile extends beyond the edge of the crate by 3-4 cm. Do not fasten the first sheet immediately tightly. This you will do after you put a few more elements. Lay them must be overlapped, the size of which is 10 cm. The metal tile is screwed with the help of roofing screws, on which there must be a special sealant, which prevents damage to the surface.

In principle, we already know how to properly roof a roof with a metal tile. The whole procedure does not take much time. Works should be carried out in a warm season and in dry weather. Etc

and need sheets of material can be cut,using for this grinder. The only restriction that prevents such roofing from being used is roof complexity. In addition, the order of fastening sheets may vary depending on the shape of the truss structure. For example, if the roof is hipped, then the fastening of the metal tile starts from the highest point. In this case, the material must be fastened to the skate as firmly as possible.

During work, move on the roof shouldgently and carefully so as not to fall and not to damage the sheets. It’s relatively easy to roof a metal tile with your own hands if you stick with the technology. That's all the features of the process. Good luck!