If you are interested in the brand "Kaleo", warmFloors of this manufacturer, you can always buy at an affordable cost. This system is a universal film suitable for any type of topcoat. If you are faced with the task of quickly installing the heating system, then the described option will be the best solution. It is not necessary to start repairs for this, laying the floor can be done where necessary. This may concern the coolest places in the room. A similar system is suitable for wooden coatings, it is able to create a uniform and gentle heating. The thickness of the system is 0.42 millimeters.
Description of the system of film underfloor heating
Recently it becomes enoughwidespread brand "Kaleo", warm floors of this company are a two-layer thermal film, inside of which there are carbon fiber heating elements, as well as a copper bus. It is located along the film. In the process of connecting to the power grid, the coating begins to study anionic particles and infrared rays of a long-range spectrum. Electricity is supplied by copper wires. But the connection of the thermofilm to the network is performed in a parallel way. The underlay for underfloor heating is necessary and is used with the intent that the heating element directs the flow of heat to the floor covering. The substrate has reflective characteristics. That is why when you install the system you can not worry about the fact that it will warm up also the ceiling of the neighbors
Positive characteristics
On sale today you can find products inwide assortment of the brand "Kaleo", heated floors are no exception. Before buying it is worth considering the main advantages and disadvantages of the described system. Among the former, ease of installation, efficiency and maximum safety can be distinguished, the latter of which is confirmed by comparison with other systems. Any home master can make installation work in just 3 hours. Savings are manifested not only in the process of laying, but also during operation. The installation does not involve the arrangement of the screed, as well as the use of various mastics and glue, which will save money. If you decide to choose a product of the brand "Kaleo", you can purchase warm floors of this manufacturer in the required length, and then divide the film into a certain number of modules. After the installation has been made, you can save energy, as during the operation of such systems the amount of bills is reduced by 20%.
Quite often modern consumers especiallyworried about security. Infrared heaters in this regard are a more suitable option compared to electric underfloor heating.
Reviews about the durability of the floor infrared heating system
Manufacturer uses patentedtechnology in the manufacture of the described systems, which allows for almost trouble-free operation for a long time. Confirmations are consumer reviews. As practice shows, even with mechanical damage, only individual sections and lanes fail. The rest of the system continues to work properly. Consumers emphasize that the film is not subject to corrosion. A manufacturer provides a warranty of 15 years.
Mounting recommendations
Infrared warm floor "Kaleo" you caninstall by yourself. It can be laid under the parquet or laminate, but in this case it will be necessary to cover the plastic film, it will protect the system from moisture. Initially, you need to check how strong the rough coating is, after the master proceeds to install the reflector, which can be Izolon. When the Kaleo warm floor is being laid, the reviews about which were presented above, in the next stage you can proceed to the laying of the film itself, the next layer will be polyethylene. Laminate or parquet flooring is laid on top. If you chose linoleum or carpet as a topcoat, then you should put fiberboard or plywood on top of polyethylene, this is done to prevent damage to the thermal film.
The method of laying a warm floor under the linoleum or carpet
Film warm floor "Kaleo" will be greatfunction under the aforementioned decorative coatings. Initially, you must check the quality of the rough coat or screed. The heat-reflecting material should follow, as in the case described above. On top of it comes Caleo film, and after that all layers are covered with plastic wrap. This is followed by fiberboard or plywood, and the final coating will be decorative: linoleum or carpet.
The nuances of laying tiles
At the first stage materials are prepared, andit is a set of warm floor, as well as film, tape and fiberboard. Experts especially emphasize that it is forbidden to use materials based on aluminum foil. It is important to determine the surface area on which the warm floor will be located. After that, you can begin to cover the heat-reflecting material. Thermofilm unfolds on top without an air gap.
После этого устанавливается терморегулятор.It is important to remember also about the need for laying wiring, after the master determines the location of the insulation removal. The next step will be the connection of wires and thermofilm. It is important to isolate the connection points well.
Conclusion
Warm floors "Kaleo", installation of which you canbe carried out independently, must be connected to the thermostat. The latter connects to the electrical network. Before completing the work, the system will have to be tested, only after that the polyethylene film can be laid on top. The final step will be the installation of the finishing floor covering. It should be remembered that not every coating can be used for this.
