Heat insulation "Tepofol", reviews about which, perhaps,will allow you to understand what advantages and disadvantages the material has, is made of expanded polyethylene. Its surface is foil-plated. The thermal insulation itself has reflective properties and has a closed porous structure of polyethylene foam. In addition to thermal protection, it provides noise, steam and waterproofing. This allows you to save on construction, as one material is able to protect immediately from several adverse events.
Customer feedback on the species of "Tepofol"
"Tepofol", reviews about which often enoughonly the most positive, is presented for sale in several varieties. Each of them is designated by a certain letter, which indicates the qualitative characteristics. According to users, under the letter A, the manufacturer produces "Tephofol" with a reflective coating, the last of which is aluminum foil. Sometimes it is replaced by a polished metallized film.
Consumers often choose a heater"Tepofol", which is designated by the letter B. It has a double-sided coating of aluminum foil and metallized film. As users emphasize, the self-adhesive material is denoted by the letter C. By the way, on the one hand it has an aluminum coating, on the other - a metallized film. On sale you can meet "Tepofol", which has the name "Metal". In this case, the metallized film is used as a reflective layer. If necessary, you can purchase NPEs. It is a substrate of expanded polyethylene.
Feedback from experts on the areas of use and application features
Thermal insulation "Tepofol", reviews about which youcan be found in this article, is used for noise, moisture, heat and waterproofing surfaces in saunas, baths, and attics. We apply material for walls, floors and air ducts. According to experts, often this insulation is used to form heat-reflecting screens behind heating batteries. The field of application depends on the thickness of the material, the variety of layers and their number. The more difficult the conditions of use, the more outstanding the characteristics of the insulation. For example, as experts emphasize, for insulation of the facade and roof it is best to purchase a "Topofol" heater of maximum thickness. From its two sides will be placed a reflective surface.
"Topofol", reviews about which, possibly, will allowyou make the right choice, and applies to the arrangement of the sexes. The higher the load on the coating, the more impressive thickness should be chosen material. Professionals are advised to purchase home masters "Tepofol" with a self-adhesive layer. It has a high adhesion to most bases. Therefore, working with the material is extremely simple. When installing thermal insulation, the reflective layer must be located on the side of the warm object.
Reviews about technical characteristics
Whether you are an expert or a home master, youmay be interested in the technical characteristics of the insulation "Tepofol". For example, the water absorption of a material can vary from 0.6 to 3.5%. This, according to professionals, is a good indicator. The reflection coefficient of the surface reaches 97%. A heater can be used for a wide temperature range: -60 to +100 ° C.
Heater "Tepofol", reviews about which will beIt is useful to read before purchasing the material, has a coefficient of thermal conductivity. It is limited by an index of 0.038 ± 0.001 W / m * ° C. The specific weight of the web varies from 34 to 35 kg / m3, but the coefficient of vapor permeability is0.0011 mg / m * h * Pa. According to experts, before buying a heating material it is important to pay attention to its ultimate compressive strength. In the case described, this parameter is equivalent to 0.035 MPa.
Reviews about sizes
It is important not only to properly install the heater,but also to choose the thickness, as well as the length of the material. The first parameter varies from 2 to 10 mm. This, in the opinion of buyers, is very convenient, since you will be able to choose the thickness depending on the objectives pursued. But the length of the roll can be equal to 15 or 25 m. As for the width, it is 1.2 or 1.05 m. The buyers claim that these parameters make it easier to work on preparing and strengthening the material to the surface.
Why choose "Tepofol": customer opinions
"Tepofol", reviews of masters about which you canread in the article, can be used in heated buildings and houses without heating. Thanks to the opinions of professionals, it can be concluded that the material is characterized by high thermal insulation performance. A foamed polyethylene structure increases the soundproofing ability, which is expressed in a noise absorption of 32 dB. Due to the fact that the water absorption of the described product is only two percent, this makes it possible to use it as a thermal insulation and waterproofing layer.
Among other things, if the surface is insulated, theydo not lose the ability to breathe. And for this reason, as buyers claim, this insulation can act as a vapor barrier. If you count, it turns out that the consumer saves triple. The use of "Tepofol" positively affects the internal microclimate of the room. The building maintains the optimal temperature, the person does not experience the suffocation effect, because the penetrating ability of the material is high enough. "Tepofol" foil has a small thickness. That's why he is not able to take the volume of the room. Due to the thermal insulation properties, the wall thickness can be reduced, and the cost of work can be reduced.
Reviews about the features of use
If you decide to use for insulation of differentdesigns "Tepofol", comments on the material are recommended to be read in advance. Perhaps this will avoid many mistakes. Of these you can understand that "Tepofol" is universal and has a wide model range. The material can be used in residential and industrial construction, with thermal insulation of equipment and pipelines. From this insulation material, a substrate is installed under the floor covering of the underfloor heating system.
If you lay the material with the reflecting side tocovering the layer, it will be possible to protect the premises from overheating in hot weather. "Tepofol", reviews of employees about which only the most positive, should be stacked with a special glue or a self-adhesive layer. If it is a bilateral product, then it must be fixed to the structure of the frame by staples or nails. Use insulation can be even in rooms that are operated in conditions of high humidity. Consumers advise for the waterproofing of joints to use metallized scotch, which does not allow to interrupt the reflective layer.
Additional tips
It is important to strengthen the insulation, wrapping it reflectinglayer to the heat source. Often it is located behind the plane of bimetallic radiators and other heating appliances. In this case, the thermal energy will remain inside the room. When mounting the "Topofol" before such equipment, it is important to leave a space, the thickness of which is 2 cm. In this case, the thermal insulation will not overheat, and its quality characteristics will not be lost.
Conclusion
"Tepofol", reviews and photos of which are presented inarticle, consists of 4 layers. The first is polished aluminum foil, the second is foamed polyethylene, the third is a high-volume adhesive layer, while the fourth is a protective film. This combination allows Tefofol to act as a barrier to heat loss, including convection, heat radiation and thermal conductivity.
