Many owners of suburban real estate,quite often one has to deal with such a problem as mold in the house. On the Internet, it is not difficult to find a lot of tips on how to get rid of mold on the walls in rooms and how to deal with it, but for some reason, information about the reason for its appearance is often lost.
The fact is that different types of mold cannot spread in a clean and dry place, which means that an environment with high humidity is necessary for the appearance of mold.
If mold in the house appears in wintertime, this indicates a poor insulation of the walls, with sudden temperature changes on the walls, moisture condensation occurs, where the fungus already begins to grow.
How to get rid of mold on the walls and ceiling of the house?
In this case, the situation can only be savedinsulation of the room, and the easiest method of wall insulation is the use of foam. But if the mold continues to develop in certain areas throughout the year, then in this case the waterproofing of the room is damaged, and this problem can be eliminated by applying construction waterproofing. Although you should not overlook the root cause of how moisture gets inside to plan a further course of action.
Knowing the root cause, it will not be difficult to find the right material.
There are only a few reasons why moisture gets into the room.
The first reason may be the porosity of the foundation(concrete, brick), although it all seems durable at first glance, but in fact there are micropores inside the foundation, through which moisture enters the room.
The second reason is the leakage of seams andinaccuracies made when laying the foundation and walls. It is through these seams that moisture freely enters the room. In winter, however, the frozen moisture expands eich and creates large scour.
And the third reason is that in these micropores, gradually accumulated moisture begins to rise, reaching even the second floor.
Today there are several basic methods andmaterials with which it is easy to solve the problem of how to get rid of mold on the walls. To protect brick or concrete foundations and walls, a method of coating with cement mortar from the outside of the building is used.
Thus, a protective layer is formed that prevents the ingress of moisture.
Another processing method is more suitable formaterials from stone, although it can be used for the rest. With the help of painting it is possible to clog pores, through which moisture has got, thus increasing the moisture resistance of the walls and the foundation.
And the last resort, how to remove mold isthe use of penetrating building waterproofing, which penetrates like moisture through micropores, thereby plugging and blocking further moisture.
There are several main wayswaterproofing and materials that are used for their implementation. To protect concrete and brick walls, various cement based waterproofing materials are most often used.
How to get rid of mold on the walls, if the fungusmanifested in small quantities? It can be wiped with hydrogen peroxide or vinegar. There are also a number of folk remedies that are no less effective. This, for example, is a solution of blue vitriol or creosote. But all these substances only for a short time eliminate the problem, soon the fungus appears again.
In order for the fungus to disappear completely, it is necessaryapply drastic measures. First, take care to completely dry the affected areas. Then it is necessary to completely remove the finish from this part of the surface. A special chemical composition is applied on top of the cleaned place. For different types of fungi and lesions using different means of treatment. Therefore, you need to invite a specialist in this area to assess the situation and determine what substance is necessary in your case.
For best results, applycomplex of means. First, a special antiseptic is applied to the treated surface with a roller, brush or spray. If you apply a brush, the solution is better absorbed into the wall. In a neglected case, it is recommended to treat the surface several times, so that the tool gets deep and neutralizes all mold spores.
After two days, the decontaminated surface is covered with special equipment, it will not allow the fungus to reappear. And after carrying out these procedures, this site can be refinished.
For indoor use there areantifungal paints. Experts advise before pasting the wallpaper with the surface to paint it with such paint. But it is desirable that all funds were from the same manufacturer. And do not forget that all substances are poisonous, so follow the necessary safety rules.
Indoor ventilation problem should be solved. In the bathroom, where humidity is high, it is advisable to ensure good ventilation.
