How to adjust the plastic balcony doors yourself?

Over the past few yearsThere is a sharp increase in demand for plastic windows and balcony doors. Such popularity is explained not only by the simplicity and convenience of operation, but also by the absence of the need for periodic repainting of the frame. However, over time, the door mechanism, like any other mobile structure, begins to loosen up. Therefore, before each person who installed such products, sooner or later the question arises as to how to regulate the plastic doors of the balcony.

Types of malfunctions

Noticing any deviations, do not postponesolving the problem for later. Before you adjust the plastic balcony doors yourself, you need to determine the problems in their functioning. One of the most common problems is the slack of the module. The reason that the closing door clings to the plastic threshold may be an excessively heavy weight of the structure, as a result of which it begins to shift downwards. In addition, frequent opening of the balcony can lead to a rattling and loosening of the handle. This problem is easily eliminated by correcting the fittings.

Sometimes during operation the door begins to touch the middle of the frame. The reason for this deviation lies in the displacement of the leaf under the influence of sharp temperature fluctuations and other factors.

Due to loose fit of the sash to the framethe sealant ceases to cope with its functions, and cold air flows into the apartment. Those who are interested in how to adjust the plastic doors of the balcony, so as not to blow, it should be understood that this problem is eliminated by adjusting the locking parts of the mechanism.

If the warranty period has not yet expired, you need to call a service representative of the company that installed the module. Otherwise, you can use the services of a master.

How to check the tightness of the leaf clamping?

Thanks to this knowledge, the consumer can notonly to monitor the quality of the work of the masters, but also to independently identify the malfunctions that appear during the operation of the structure. If a strong airflow is drawn from the balcony door, this can only mean that the mechanism needs adjustment. To check the tightness of the clamping of the leaf, it is enough to do some simple manipulations.

To do this, you must take an uncomfortableSheet of paper and lay it between the box and the frame. After that, you need to close the door tightly and pull the edge of the sheet to yourself. In the process of pulling out paper, you should pay attention to the efforts expended. If the sheet is taken out easily, then everything is in order. If on some of the tested sites you had to apply some effort, you need to adjust the density of the clamping of the leaf.

How to adjust the plastic balcony doors when sagging?

Noticing that in the process of closing the lower partsash touches the threshold, you need to spend a few simple manipulations. First you need to open the door. Using a special hex key, turn the screw located in the area of ​​the upper hinge from the end of the sash. Usually, a pair of turns is sufficient to eliminate the problem.

After that, you need to release the upper screws fromplastic decorative plugs and turn them clockwise. At the final stage, you should check the quality of the work performed and, if necessary, repeat the procedure.

How to adjust loose knobs?

Any, even the highest quality fittings withtime begins to fail, requiring adjustment. You can do it yourself, without waiting for the arrival of a specialist. First of all, slowly turn the plastic cover at a 90 degree angle. Then you need to find the fastening screws hidden under it and carefully tighten them. The fittings of the lock of the tightly turning handle are lubricated by means that do not contain resins and acids. To remove a broken and requiring a replacement handle, remove all screws and attach a new part.

How to adjust the plastic balcony doors when they jam in the middle?

Over time, many owners of modern modules notice that the sash begins to cling to the middle part of the frame. To solve this problem you need to carry out several simple operations.

Before adjusting plastic doorsbalcony "Rehau" or any other, you need to move the sash closer to the bottom loop by turning the adjusting screw. This can be done with a special key. Then you need to check how much more freely the sash began to close. In case of incomplete troubleshooting, it is recommended to adjust the upper loop as well. This is done by analogy with the bottom.

Sash fit adjustment

Before adjusting plastic doorsbalcony ("Century", for example), you must find located on the sash locking elements. To rotate the eccentrics, it is desirable to use a key or pliers. Having corrected the locking mechanism, it is recommended to check and adjust the strike plates.

Regardless of the type of problem, the adjustmentIt is advisable to hold the clamp at least twice a year. Experts recommend doing it in the fall and spring. Those who are interested in how to adjust the plastic balcony doors in the winter can be advised to increase the slam pressure before the onset of cold weather. This will significantly improve the thermal insulation of the room. In summer, in order to save gasket and improve apartment ventilation, it is desirable to weaken the degree of clamping.

How to avoid further problems?

Like any competitive marketplace,here unfair manufacturers appear periodically. They offer low-quality products made from low-grade materials. Such products are much cheaper, but very quickly fail. Therefore, in order not to think about how to adjust the plastic balcony doors, you need to order modules only in well-known and time-tested companies.

When choosing a product you need to make sure thatall available mechanisms are suitable for plastic balcony doors. High-quality modern fittings can easily withstand a load of about 100-130 kilograms.

The design must be additionally equippedspecial compensator that prevents the door from sagging under its own weight. Especially microlifts are needed in double-chamber double-glazed windows, differing in impressive dimensions.

To prevent door sticking and slacking of the sash, the modules are equipped with a special additional tire supporting the heavy structure.