How to level the walls with plasterboard when performing apartment repairs?

Curved walls with waves from warped fromTime material can only inspire experienced sailors and lovers of antiquity, but for the modern premises they are absolutely not suitable. If you decide once and for all to do away with all this disgrace, then you should read our article! So how to level the walls with drywall? First you need to find out that in this case two typical methods are used: with and without framework.

It is easy to guess, in the first case, the sheetsmaterial fasten on the basis which is specially created for such a case. It is easier and faster to glue them directly to the wall (frameless method), but in this case it should be at least slightly different from the surface of the old tank hall. So they often prefer to level the walls with their own hands with drywall, having built a frame. As a rule, it is made of wood, but this material has a number of annoying technical flaws:

• No matter how strange it may seem, but this design is much more difficult to install.
• Unfortunately, they often forget about thorough drying.material, with the result that the wall can go exactly the same waves that were on it before the repair. And the crumbled pieces of gypsum will make the question of how to level the walls with drywall, simply irrelevant.

Thus, during the repair we strongly advise you to save on suppliers of consumables. Much more reliable and easier to assemble the metal profile, which also has better reliability and durability.

Кроме того, при помощи металла ремонт можно hold in the premises for any purpose and operating conditions. This material is not afraid of moisture, so even with changes in daily temperatures in the room and the formation of condensate, you can not worry about the condition of your walls. Are you still thinking about how to level the walls with drywall? First of all, you need to buy guides and rack elements. Do not forget about the quality level of construction, square, roulette and screws.

First you need to fasten to the floor and ceilingguide profiles, as they should be aligned and secured, then you can proceed to fasteners racks. Be sure to remember that their step must be made equal to the width of the sheet of material. Since it is possible to properly level the walls with plasterboard only if you carefully follow the technology, forget about the haste. The saying about the seven dimensions in this case becomes extremely relevant.

After the assembly of the frame itself, you need to proceedto fasten sheets of drywall. It is best to use for this standard black screws, which are made of oxidized metal. As a rule, a length of 25-32 mm is enough. For every 30-40 cm square, one screw is taken.

So that the joints between the sheets do not resemblemeteor craters, they need to be putty. First of all, you need to handle the places where you screwed screws. Repeat the procedure using a special mesh that will prevent the putty from falling off. Your wall is ready! So you learned how to level the walls with drywall! There is nothing difficult in this, and therefore even a novice can easily cope with this.