Circular saws of desktop type are famoustheir productivity. The racks are set in different widths. Saw blades are most often made of an alloy of steel and aluminum. For professionals, these devices are great. However, it is important to note that the models differ in technical characteristics. In order to understand this question in more detail, we need to consider the most popular circular saws.
Technical characteristics of the model "Corvette"
Circular saw (electric, desktop)"Corvette" is a wide stand. The working frequency of the tool is at least 2,000 rpm. If necessary, the power of the model can be adjusted. The width of the rack is 12 cm. If you believe the feedback of buyers, then the reducer in this saw is used with the protection unit. The stopper in the device is at the top of the structure. The casing is missing from the model. The rotor operates at a frequency of 20 Hz.
The system for protection from network failures is applied seconddegree. The thickness of the saw blade is exactly 2.1 mm. There are no lining on the case. According to experts, this saw is quite stable. For the cutting of large bars, the model of this series fits perfectly. On the market, this table saw can be bought for 13,700 rubles.
Description of saw "Interskol"
Circular saw (electric, desktop)"Interskol" is great for cutting oak bars. If we talk about the parameters, then the threshold power of the tool is exactly 3.1 kW. This saw operates at a frequency of 22 Hz. There is no network fault protection system in the device. For professionals, the model fits perfectly. A minute saw blade makes about 3200 revolutions. The power regulator is located at the rear of the structure.
With a view to cutting the pine boards the model is suitable.The teeth in this case are at an angle of 35 degrees. System protection against shaft overheating is absent. The width of the carriage is exactly 8.4 cm. The ventilation holes are located near the handle. According to buyers, the brake is of high quality. In this case, the rotor operates smoothly. If necessary, the frequency of the instrument can be changed by means of a regulator.
The support tile in the device is made entirely ofbecome. From corrosion it is protected well. The permissible temperature index for the saw of this series is -20 degrees. The distributor in the tool is used with a damper. The limiter of the model is at the top of the structure. It was worth a circular electric (desktop) "Interskol" (Perm, a store of construction equipment) about 18 thousand rubles.
Customer reviews about the device Makita DHS680Z
Saw circular saw, electric,desktop (photo shown below) reviews mostly gets good from buyers. This device is manufactured with one holder. In this case, the emphasis is made entirely of alloy steel and aluminum. If you believe the feedback of buyers, then the limiter is able to withstand heavy loads. For cutting wide boards, the tool fits perfectly. However, it is important to note that the model uses a small casing.
At low rpm the noise level is 33dB. According to experts, this is quite a lot. Sleeve at the saw is installed without gasket. The rotor of the tool operates at a frequency of 23 Hz. The width of the stand is 8.4 cm. The support washer is not near the saw blade. If you believe the feedback of buyers, then the power can be adjusted without effort. It is worth in our time, this saw type desktop type about 13,200 rubles.
Technical specifications of Makita DHS665Z
This saw is circular (electric,desktop) has a lot of advantages. Many experts choose it for high frequency and high-quality stator. The rotor at the saw of this series is applied with protection of the second degree. The width of the stand is 8.3 cm. The saw blade is located in the front part of the structure. The protective rod is not provided for the model. At medium revs, the model produces a maximum of 35 dB.
If you believe the feedback from customers, the networkthe cable is equipped with a high-quality casing. The supporting tile in the device is of a small width. The protective spindle is located near the motor. The threshold power of this bench type saw is 2.6 kW. According to buyers, the rotor burns rarely in the model. However, it is important to know that at high speeds the device is allowed to operate for no more than three hours. This saw table type is worth about 15,500 rubles.
Description of Makita saw DHS683Z
Saw circular saw (electric,desktop) has pretty good performance. The threshold power of the tool is 3.3 kW. If you believe the buyers, then the limiter is configured without any problems. In this case, the rotor is used with protection of the third degree. The casing of this saw is not provided by the manufacturer. For cutting wide bars, the device fits perfectly. The rack has a width of 8.3 cm. With the stabilization of the instrument, everything is in order.
Protective washer near the saw blade fixedOK. The overlay over the rotor is provided for the model. The permissible temperature of the saw is at least -20 degrees. The starter in this case is located at the rear of the structure. The base plate of the tool is made of stainless steel. The rotary spindle is of high quality. Thus, the rotation speed of the disk varies very smoothly. It is worth in our time tool of this series about 12,600 rubles.
Customer Reviews of the Bosch PKS 55
The saw saw is circular (electric,desktop) is in great demand. However, for professionals, the model does not fit well. The threshold power of the instrument is 4.4 kW. The limiting frequency of this bench saw is 3200 rpm. According to buyers, the tool is turned on quickly.
The brake system used by him is highquality. There is no protective washer on the disc. The width of the lower lining is only 8.8 cm. If you believe the buyers' reviews, then the rotor is used with high-quality protection. In total, the model has two carriages. The reducer is used with the stem. This saw operates at a frequency of 23 Hz. For the purpose of cutting long boards the model does not fit well. It is worthwhile in the shops the saw of the desktop type in the region of 17 thousand rubles.
Technical specifications of the Bosch PKS 58
Данная пила циркулярная (электрическая, tabletop) is able to quickly cope with the cutting of different wood. However, in terms of security, the model is much inferior to its competitors. Speaking of indicators, it is important to note that the threshold power is only 2.1 kW. The saw operates from the 230 V mains. There is no overload protection system. The driven gear is used in this case without a bush. The brake system is applied with a blocker. The limiting frequency of a saw of the desktop type is 25 Hz.
There is no rotor protection system.The saw blade is used without a lining. In this case, the starter is used with a distributor. The mains cable is protected by a casing. The flange in the presented saw is above the gasket. At maximum rpm, the noise level is 35 dB. Saw circular (electric, desktop) with their own hands is quite easy to repair. The adapter does not have an adapter. If you believe the customers, the disc is removed very easily. Guides at the saw are made of alloy steel and aluminum. Buy this model can be for 12800 rubles.
Description of saw blade DeWalt DWE560
This saw is first of all famous for its strongrack. Stabilization of the disk is quite high. For precise cutting of wood the device fits perfectly. However, there are still drawbacks in the model. First of all, the owners complain about the low plate. For the purpose of cutting large bars, the model can not be used. The motor in this case is applied with a threshold power of 2.5 kW. In turn, the frequency of the presented bench saw is 33 Hz.
The rotor is used with protection of the third degree.The energy consumption of the instrument is 210 watts. If to trust buyers, the model turns on easily, however the regulator is very inconvenient. The network cable is standardly applied with a casing. It is worth in our time saw this series only 14,400 rubles.
Customer Reviews about the device "Bison"
Circular saw (electric, table)"Bison" stands out for good performance, and its stand is set to high quality. The motor is used at 2.2 kW, and it works at a frequency of 26 Hz. The rotor of the model is used without a protection system. If we talk about performance, the width of the rack is 6.8 cm. The saw of the specified series weighs only 5.6 kg.
Air vents on the case more.Problems with cooling the engine rarely occur. At an average frequency of turns, the tool is allowed to use no more than three hours. The safety shutter is missing in this case. The starter is standardly mounted with a button type. This circular saw (electric, table) in the Leroy Merlin costs approximately 17,300 rubles.
