LED strip white 12V is aa specific printed circuit board that consists of series-mounted LEDs, as well as resistors that play the role of resistance elements. Let's look at the features of connecting and installing the specified lighting.
Selecting the profile for installing the LED strip
![led strip white](/images/domashnij-uyut/svetodiodnaya-lenta-belaya-12v-ustanovka-i-montazh.jpg)
Installing LED strips on profilespromotes effective heat removal. This approach to installation makes it possible to avoid overheating and exclude additional costs for repair work.
Aluminum profile
Using a profile made of aluminum,The white LED strip can be securely fixed in the fastening system. Such devices have been designed to provide the easiest and fastest installation of lighting in any interior.
Corner profile
![led strip white 12v](/images/domashnij-uyut/svetodiodnaya-lenta-belaya-12v-ustanovka-i-montazh_2.jpg)
Embedded profile
Изготовленный из металла встраиваемый профиль is resistant to external influences. This solution allows you to give the lighting a more spacious look. Installation of structures of this category is possible due to the landing on the glue or fastening with the help of special fasteners.
How to split the LED strip?
![white LED strip](/images/domashnij-uyut/svetodiodnaya-lenta-belaya-12v-ustanovka-i-montazh_3.jpg)
What is required for installation?
To the LED strip white bright hadthe ability to adjust the saturation of lighting, it must be equipped with a special dimmer. In the future, the adjustment will be made using the remote control.
To implement the scheme, you need a power supply.The latter will play the role of a step-down transformer. When choosing it, it is important to calculate the power ratio correctly, since each LED white tape has individual parameters.
Installation
![white LED strip light](/images/domashnij-uyut/svetodiodnaya-lenta-belaya-12v-ustanovka-i-montazh_4.jpg)
The standard power supply is completed with a networkcord and several single-color electrical conductors marked with the letters "L" and "N". These wires are used to connect the tape to the dimmer. There are also additional conductors here: red - plus and blue - minus.
The connection procedure assumes a connectiontapes with a low-voltage output of 12 V and a power supply. This completes the process of connecting the standard ribbon. However, this method is relevant only for a continuous reel length of several meters. But what if you need to install LED lighting around the perimeter of the ceiling? In such situations it is necessary to resort to joining separate segments. To implement the task, you will need special connectors. These connectors can be either round or flat. In each specific situation, everything depends on the features of the tape used.
Отдельные куски ленты можно соединить consistently. However, this method has some drawbacks. First of all, on each segment there will be a certain drop in voltage, which will affect the uneven brightness of the tape. Secondly, in this case, too much current will flow through the tracks, which is fraught with excessive heating of the LEDs and, accordingly, a decrease in the service life of the tape.
To get out of the above situation, you can connectpieces of tape in parallel. It will be necessary for this purpose to purchase additional conductors with a cross section of about 1 mm. With the help of the last pieces of LED tape are spliced by soldering. The considered variant looks actual in situations when there is an opportunity for concealment of a massive power supply unit behind the ceilings or interior elements.
Safety requirements
![neutral white LED strip](/images/domashnij-uyut/svetodiodnaya-lenta-belaya-12v-ustanovka-i-montazh_5.jpg)
- when making connections by soldering, it is worthwhile to avoid damaging the conductive tracks on the circuit board;
- power connection should be made according to the requirements of electrical engineering;
- During the installation of lighting it is necessary to observe the polarity;
- When installing the LED strip, serial connection is not recommended (uneven distribution of voltage can lead to overloads of electronic components and damage to the product).
Advantages of creating lighting with LED strip
LED strip white bright has the following advantages:
- Installation of such lighting is very simple. Most products are equipped with a double-sided adhesive tape, with which it is convenient to glue the product to the ceiling or a special profile.
- The operation of the LED strip comes with low energy costs.
- The service life of LEDs is the longest among all household lighting sources. In the case of proper operation of the tape does not burn out at all.
- The flexibility of the board, on which the lighting elements are located, contributes to the realization of the most original design ideas.
Disadvantages of LED strips
Like any lighting device,LED strips differ in some minuses. So, to achieve a power equivalent to conventional lighting fixtures, much more energy will have to be supplied to the tape. Due to significant financial costs such funds are used only as auxiliary decorative lighting.
Finally
![LED strip white bright](/images/domashnij-uyut/svetodiodnaya-lenta-belaya-12v-ustanovka-i-montazh_6.jpg)
It is also worth noting that the place where you planinstallation of LEDs using double-sided tape should not be contaminated or dusty. Otherwise, the lighting means will not be sufficiently secure to the surface.