Imitation brick for interior decoration -an interesting design solution. It can be used for a whole room, and for highlighting any zones or walls. Many people ask themselves: "How to do this, do not strip the walls before masonry?"
And they are not always built of bricks.Variants of the materials themselves and ways to make from improvised means a lot. Two large groups can be distinguished: imitation of a brick for interior decoration with the help of purchased materials and made with own hands from improvised means. It is worth analyzing this topic in more detail.
Preparatory work
This stage will be the same for all types of finishing materials, except for PVC and MDF panels.
- You should delete the old material.
- Putty deep flaws on the wall.
- Prime the surface.
- If necessary, plaster the walls to an even state. Sand, primed.
Wallpaper
This kind of material is the easiest way to implement such a design solution. For this finish it is important:
- Smooth base. There should be no waves, deep flaws and bulges.
- Compliance with the technology of pasting. So that as a result there are no gaps on the joints of the cloths.
But the fact is that even vinyl thick wallpaper is notwill create the fullness of the feeling of natural masonry. As you can see in the photos, more or less real imitation of a brick for interior decoration is achieved using 3D wallpapers.
PVC Panels
An interesting solution for rooms with increasedhumidity and aggressive environment. This kind of material is easy to care for, wear-resistant, for its construction can hide communications. Where it is better to use? Simulating the brick for the interior decoration of the kitchen will add a twist, will help to get away from the standard solutions in the design of this room. In the photo you can see one of these uses.
Stages of work:
- As such, the preparation of the foundation does not require this type of cladding.
- On the perimeter, the framework for the panels is assembled with the help of a guide and rack-mount profiles. Since the finish material is lightweight, a rigid frame is not required. Unless you plan to insulate the walls.
- Further along the perimeter is fastened the starting plasticprofile, if it is not planned to cover other perimeter wall elements with other decorative elements. It is better to use corners, profiles, skirting boards for the color of the main material, then imitation under the brick for interior finishing will achieve greater effect.
- The most crucial moment is the docking of panels. It should be as denser as possible to make up the fabric, so as not to form a gap between them.
There are two disadvantages:
- Under a certain angle of lighting joints between the canvases can be viewed.
- Plastic can not be attributed to natural materials.
As you can see in the photo, the panels can be textured and look quite realistic.
Where else can such an imitation be used?bricks for interior decoration? Plastic can show itself well when used in the bathroom, toilet, corridor. For such premises it will be ideal. First, it does not absorb water, and secondly, it is easily laundered from all kinds of pollution.
Clinker tiles
Simulating a brick for interior decoration with this option is one of the most popular.
This material will create the most realistic lookbrickwork. Clinker tiles, as a rule, are produced by canvases, on which several rows of bricks are laid out. This simplifies and speeds up the cladding process. Mounting method:
- The substrate must be more or less evenly leveled.
- The glue is mixed. First applied to the substrate.Usually, no more than one square meter is processed at a time. Next - on the tile. Clutch lead from the bottom up. Work should be carried out with level control. It is impossible to find the ideal size for the tiles under the wall, so you can not do without cutting.
- After the surface has dried, seal the seams with a grout.
This kind of lining is used as a part of the decor. Applied in the interior of living rooms, corridors.
Ceramic tile
This material is lighter than the previous version, but it is also difficult in the process of installation.
It is better to choose plates with an imitation of severalbricks. This will facilitate and speed up the cladding process. The principle of work is similar to the previous version. It can be noted that the facing is a complicated kind of finish and it is better to trust the professional. But if you still want to do it yourself, then you should perform the masonry technology. Do not rush - observe the dimensions of the seams.
This imitation of brick for interior decorationbathroom, toilet, kitchen will be an excellent solution, because it can withstand direct water ingress, it is easy to clean from any contaminants. Presented photos show several design ideas for the design of these premises.
Gypsum tiles
This option should be noted separately, becausethat it is possible to make such a lining not only by purchasing the material in the finished version, but also making it yourself. To do this, you need: plaster / putty, a box for the size of the brick. It should be noted that the most popular imitation brick for interior decoration is in the form of spoon laying. The dimensions of a spoon of a standard brick are 65 x 250 mm. That is, the capacity is required to be either of the same size or approximate to it. The process itself is simple:
- Knead the solution, pour into the mold. Kneading should be done for one serving, because it has the property of quickly solidifying.
- Wait until the solution is completely set. Pull out.
Advice
Of course, the production process will accelerate ifthere will be several capacities. You can add directly to the gypsum solution dyes or paint the finished surface. After the plates are ready, they are glued in the same way as the previous two options. After solidification, paint the desired color. You can shade unevenness for greater realism. Stitches are also stained with imitation mortar for masonry. Or just leave it unpainted, depending on the solution used for the cladding.
Plaster and shpatlevochnaya imitation
This kind can adequately simulate brickwork, if properly carried out works.
A layer of plaster or putty is applied to the wall, a short drying time is given, and then a drawing of the masonry is squeezed out with a finger or the back of the spatula.
For this option, do not carefully level the applied layer.
After finishing the work, the layer should dry out. And then the paint is applied to the desired shade. Unevenness can be shaded.
Imitation of a brick for interior finishing with your own hands
There are a number of options available for own production:
- Paint. The cheapest and simplest option.This will require paint under the color of the facing brick. A stencil is prepared for laying. You can use cardboard, plastic - to whom as it is more convenient. And then the wall is dyed, it dries up and on top of it another pattern through the stencil is applied a pattern of seams. This kind of near is not very similar to the original, but from a distance looks plausible. You can use, for example, to design the balconies.
- One more budget execution.Cut out blocks of thick cardboard (you can use packaging material). Stick on the walls, leaving gaps for the seams. Then the entire plane should be glued with a napkin, first it should be crumpled, then spread out. This will help the surface to give the texture. And finish painting. For this kind of finish, fine-grained polystyrene, cork substrate can be used.
With regard to the choice of material for decoration -this is an individual solution. The only advice: before buying it is necessary to get acquainted with the characteristics and properties of the material. And then make a decision to buy.
