Any technical device that turns out to bean indispensable assistant in everyday life, may eventually fail. In this case, it is not always possible to replace it, especially if it is an expensive product, for example, a washing machine. Modern women have long forgotten what it means to wash by hand, since it takes a huge amount of time, and why, if there is a machine that will do everything itself.
When the first signs of leakage are observedwashing machine, do not rely on pure accident. It is necessary to start acting as quickly as possible. Otherwise, after a few minutes or at the next wash, you can see in your apartment a real flood, which will cause problems not only to the owners of the apartment, but also to their neighbors. What if the washing machine flows from the bottom? What causes most often cause such a malfunction and can they be fixed independently?
Washing machine flows from below: causes
To draw up a repair plan, to startit is necessary to find out the source of the malfunction. In fact, there are many reasons that can affect the formation of leaking washing machine from the bottom. The problem, when the washing machine flows from below, can arise both with the old model and with the new apparatus.
As a rule, the most common causeSuch a fault is water of poor quality (tough, with heavy metal impurities). Especially it concerns budget models, which use cheap component parts and materials. Also, there are several other reasons why water flows from the washing machine from below:
- Multiple violations of the device operation rules.
- Use of powder and other chemicals of poor quality.
- The presence of a hidden factory defect device.
- Application of accidental mechanical damage during use.
Unfortunately, no owner of the washing machine can be immune from the appearance of such a problem.
What should I do if a leak is formed?
First of all, it is necessary to stopthe devastating flood. To do this, the washing program is immediately terminated, the appliance switches off from electricity. The water from the tank is drained by an emergency filter. After all the laundry is taken from the tank. To begin repair, it is necessary to understand where the leak is formed. To do this, you will need to conduct a thorough inspection of the main elements of the washing machine. In this case, it is worth paying attention to the integrity of the components and the presence of water residues on them.
Next, we will look at ways to eliminate leakage depending on the location of the problem.
Breaking the integrity of one of the hoses
In the process of exploitation this part often losesits quality, and over time, it can form leaks. For diagnosis, you can use a simple method: wrap the hose with toilet paper. If it becomes wet in a certain place, then we can safely conclude that there is a leak. If the depressurization is detected at the junction of the hose and the housing, the gasket must first be replaced.
The device has two hoses: a filling and a drain hose. If the water on the floor appears when filling the tank, the first option is damaged, if the washing machine flows from below when it is squeezed out - the second one.
If the result of the diagnosis is a violation of the integrity of one of the hoses, then it is easy to solve the problem at home, without calling the master.
If a small hole was found on the hose,then it can be patched with a rubber quality material, using an adhesive that persistently transfers moisture. At first, you can safely use an ordinary wide electrical tape. However, this is an exceptionally compulsory provisional measure. Most experts argue that the best solution to the problem will still be the replacement of the hose for a quality analog, and not repair. In addition, the cost of such an element is inexpensive, and a new hose will ensure the uninterrupted operation of the technical device.
Damage to water pipes
To carry out repairs you will have to dismantlethe top cover of the washing machine and replace the failed parts. If the damage was not so strong to change the element, then the hole can be sealed with a quality sealant. After removing the pipe, its surface is treated, and then it is installed into place with a special rubber-based adhesive. It is recommended to check the quality of the work done only after the adhesive has dried completely.
It is worth noting that even the most popularmanufacturers who have great confidence from buyers, often save on these materials. Therefore, leaks may appear even after a year of active use of the device. Many craftsmen note that this is a fairly common reason why, for example, the LG washing machine flows from below. It is worth noting that such repairs can be carried out with their own hands, without calling a specialist.
Malfunction of the dispenser
Visually it is presented in the form of a sliding structure, where the detergent powder is laid. The performance of the dispenser may be impaired for several reasons:
- Was clogged with a detergent, which did not have time to dissolve.
- It got a foreign object (important for families with young children).
For diagnostics, you need to reach thepowder and inspect it for streaks. To solve the problem caused by the dispenser, it is usually enough to simply clean and rinse it. But it is not always easy to do this, for example, if the washing machine "Samsung" flows from below and suspicion is to this part of the device, then it will not be easy to rinse it. Since most models of this manufacturer tray for powder is not obtained without dismantling the front of the device.
After the purification operationsrestart the wash program in the usual mode. In the event that the washing machine is still flowing from below at this point, the problem is in the intake valve. If there is no experience in replacing this design, it is better not to risk it and call a qualified master. He will quickly repair or replace the failed part.
Damage or wear of the cuff
This is another reason why a washing machineflows from below during washing. Sometimes small items remain in the pockets of clothing, they can easily damage the rubber seal. Also, the cuff rupture may appear due to wear of the material. Damages of a small size can be eliminated with the help of high-quality rubber fabric and water-resistant glue. If it is not possible to restore the cuff, it will have to be replaced.
Infringement of integrity of a tank of the washing machine
Although it is a sturdy construction that is manufacturedof high-strength materials, but there are holes in the tank. Most often it is a consequence of improper use of the instrument: wash shoes, belts with large metal buckles, underwear with metal parts without special bag for laundry, etc. Unfortunately, on their own to solve the leak problem will not work if the tank is damaged...
To carry out repairs it is necessary to calla competent specialist who will perform the necessary restoration work. A similar situation occurs when the water pump is damaged. It can not be repaired on its own. In 95% of cases, the part will have to be replaced to restore the washing machine.
Conclusion
If the washing machine flows from below, it is recommendeddo not use it or at least give the program its end. It is necessary to switch off the device immediately. Otherwise, there is a high probability that the embedded electronic system will also fail. Then there will be another, more global question about what is more expedient: to pay a huge bill for repairs or buy a new washing machine?
