Choosing a hose for watering plants is importanttask for gardeners and gardeners. Today on the market there is a large range of products designed for this purpose. Watering hoses have different properties and have different prices.
All products for the supply of water can be divided intofence and garden. The first group has a rigid base that prevents the hoses from collapsing. Such materials easily withstand the negative pressure that occurs when a well is withdrawn. The second type of products is directly irrigation hoses. They are usually connected after the pump, pushing the water.
These materials have good flexibility.ease, they are convenient to use. Such hoses for watering are required in any household in large quantities. With their help, they water the plants through tips or sprinklers, wash the paths and cars, create a home plumbing.
The most common materials used to make watering tools are polymers and rubber.
Watering hose (rubber) must withstandpressure created by water. For this, the workload must be three times lower than indicated in its characteristics. In irrigation systems, this indicator is rarely above 6 bar, so standard products can easily stand it.
When choosing hoses for irrigation, considertemperature conditions at which the material will be used. If there is a need to pump water during frost (late autumn), you should purchase products that have improved properties. Otherwise they will lose strength and elasticity.
Depending on the speed of the fluid and pressure, choose a product with the appropriate diameter. If the section is too large, the pressure may drop, and it will not be enough for normal watering.
Too small a hole will not allow to getnecessary water flow, which may affect the work, for example, sprinklers. A standard solution would be to choose a one-inch irrigation hose that is suitable for many pumps.
When choosing a product, consider its duration.operation. Any watering hose bends during use and rubs against various surfaces. The item follows the summer resident on the ground, lawn, gravel or stone paths. In this case, the main load falls on the casing, which gradually wears out, becomes thinner and becomes unusable. Different products age at different speeds. It all depends on the thickness and durability of the housing material. Depending on the conditions of use, the service life of the hose ranges from three to ten years.
