For wells of different depths applyspecial pumps for pumping water. The devices of this type operate on 220 V. The Vortex company makes modifications to them of various capacities, and many devices are manufactured with high conductivity capacitors.
К основным параметрам насосов следует отнести operating power, overload and nozzle pressure. To understand the pumps brand "Whirlwind" in more detail, it is necessary to consider the advantages of existing modifications.
CH-50 device overview
Указанный дренажный насос "Вихрь" производится с pass capacitor. If you believe the arguments of experts, then this model is able to withstand high inlet pressure. Also worth noting is the good conductivity of the capacitor. However, problems with the rod occur very rarely.
Pushers at the pump of the presented series are applied with slips. Many experts say that they do not need frequent lubrication. There is a modification of the presented type in the area of 33 thousand rubles.
Opinion about the model CH-60
This fecal pump "Whirlwind" is made withlarge capacitor box. At a depth of over 20 meters, the model feels confident. The pressure reserve of this modification is quite large. Numerous reviews emphasize that the named device is equipped with a quality unit. Protection at the pump is used class PP30.
Внимание заслеживают и компактные толкатели.As consumers confirm, overloads from the plates they cope remarkably. The total operating power of the modification is 400 watts. The limiting pressure from the plates does not exceed 4 bar.
The fitting of the CH-60 modification is applied at 3.4 cm.Many experts say that the lining under it is chosen of a small thickness, but it wears out rather slowly. Electricity is supplied through a condenser unit. Also noteworthy is the fact that the modification is quite often used for wells.
There is a well pump "Whirlwind CH-60" in the range of 22-23 thousand rubles.
Reviews of pumps CH-80
Насос "Вихрь СН-80" производится с контактной condenser box. An adapter for this modification is used on the terminals. The nominal voltage of the pump is at around 200 V. In this case, the rotor unit is missing. The return bar is used of small diameter, however it is fixed in the device rigidly. The operating power is only 340 watts.
Coupling outlet installed with an adapter. At a depth of 30 m, the device works without failures. As practice shows, for hydrostation named modification is not suitable in the best way.
Pushers are used with steel plates.And if you believe the arguments of experts, they are erased very slowly. In the upper part of the construction there is a protective cap. Through it, the user is able to check the lubrication of the plunger.
The price of this pump starts from 34 thousand rubles.
CH-90 device overview
Этот насос производится с переходником под condenser unit. In size, the named modification does not stand out among previous devices. If you believe the opinions of experts and consumers, the device is able to work in wells at 30 m. Many experts say that the pushers are able to withstand pressures above 3 bar. The protection of the model of the presented series is applied class PP31.
The valve in the device is used only at elevated loads. The SN-90 pump operates at a voltage of 220 V. A special sleeve is used to secure the rod to the holder.
Special attention in the device deserves a rugged case. His stand is made of brass. Directly the cover is twisted quite simply. The terminal box of the model is protected perfectly.
The limit overload rate is 4 A.The diameter of the output valve is 3.4 cm. The coupling of the return mechanism is used with an adapter. By the way, this device can also be operated at a depth of 50 meters. The price of this pump fluctuates around 33 thousand rubles.
Opinion about the model CH-50N
Pump model CH-90 is often operated onhydropower stations. And judging by the reviews, his conductivity is quite high. It should also be noted that the indicator of the pushing force is at the level of 5 N. However, some experts say that the lack of a model lies in weak clamps - the pads for them are selected by the copper type manufacturer. Directly stand is made entirely of brass.
Также стоит отметить, что переходник находится в top of the structure under the hood. The main push cylinder is small. The plunger at the pump of this series is used with two pins. Some experts claim that this device is prohibited to use at a depth of over 30 m. However, the parameter of its maximum load is as much as 3 bar.
There is a design of the presented series within 23-24 thousand rubles.
Reviews Pumps CH-55N
Указанный насос "Вихрь" отзывы получает, как generally positive. Among the features of its device should be noted quality solid rack and reliable capacitor unit. Conductivity modification is at around 3 nm. It is also important to mention that the pushers in the device are used with copper plates. The plunger of the modification is used with two contact adapters. Directly fitting does not need frequent lubrication.
Отдельного внимания в устройстве заслуживает protection system that applies class PP31. According to reviews, failures in the mechanism, thanks to it, occur very rarely, and at a depth of 20 m the model feels confident.
For powerful hydrostation specified modificationsounds good. However, it is important to consider a small overload parameter. The axial rod at the pump of the series is applied to a small diameter. And the pressure gauge in the standard device is not provided.
The price of this pump starts from 22 thousand rubles.
Device Overview CH-65N
The brand "Whirlwind" pump CH-65Nmade with two plungers and high-quality condenser box. According to consumer reviews, the bar at this modification flies quite rarely. The width of the pushers is as much as 33 cm. Many experts also say that the model can be operated at a depth of over 30 m. In this case, the plates of the pushers are made entirely of steel.
The return valve is applied a small width, and it can withstand a maximum pressure of 4 bar. Adapters for the filter system are not provided.
It should be noted that this device is not intended to work on collectors unambiguously.
There is a modification of the presented series in the range of 25-26 thousand rubles.
Opinion about the model SN-50R
Produced by "Whirlwind" pump CH-50R reviews,mostly gets good for the high quality of the condenser unit. The working capacity of this modification is as much as 500 V. And, according to the experts, its pushers are able to cope with large overloads. Separately, it is important to note that the plunger of the modification is used with two bushings. Many consumers say that the device is well suited to work at hydroelectric stations.
Возвратная муфта применяется с переходником.Bottom pushers are used only with brass plates. The capacity of the pump of this series is only 4.4 ms. The sealing sleeve above the rod in this case is missing. Among the shortcomings, customers note low throughput at the output, which is no more than 5 ms.
Buy a pump in our time can be at a price of 30 thousand rubles.
Reviews Pumps CH-60R
"Whirlwind" - CH-60R pump - quite oftenapplied on collectors. According to consumers, the model’s performance indicator is quite high. But for hydrostation this modification does not definitely fit.
It is also worth noting that the model has onlytwo pushers. The return plunger is used with a small diameter, and it does not have a protective sleeve. Special attention deserves a compact adapter - a capacitor for it is selected contact type.
There is a device in the range of 33 thousand rubles.
CH-80R device overview
Produced by "Whirlwind" pump CH-80R is capableboast high performance and high-quality rack. In the central part of the modification there are adapters for a capacitor unit. Many buyers say that the pump starts pretty quickly. The rotor is matched to it with a double anchor.
The current overload of this modification is not terrible.Pusher covers are made entirely of brass. The conductivity parameter of the modification is located at 4 microns. The inlet pressure limit is approximately 2 bar. Return plunger installed at the bottom of the design.
Также стоит отметить, что защита у насоса applied class PP13. The total mass of the modification is 5.7 kg. A pressure gauge is not provided as standard. The working clutch of the model is used with only one filter.
There is a well pump "Whirlwind" of this type of about 35 thousand rubles.
