Pump station "Jilex Jumbo" issuperficial. The equipment has a built-in ejector, which is connected to the pipes. The system facilitates efficient intake of liquid at the inlet, in addition, the equipment does not have a requirement for the purity of the liquid and dissolved gases.
Reviews about the features of the models of pumps "Jumbo"
Pump stations "Dzhileks", reviews of which youYou can read below, presented models 60/35 P and 70/50 P, with a polymeric case, and embedded embedded parts are made of brass. Pumps 60/35 N, 60/45 and 70/50 have a stainless steel body, while the model 60/35, this part is made of cast iron. According to users, some parts, including the impeller, are made of plastic materials, they are highly durable.
Pump station "Dzhileks", which malfunctionscan be removed by you yourself, it has a transitional aluminum flange, a closed lid, which is why its contact with water is completely excluded. Buyers emphasize that the equipment is well protected from leakage, this is ensured by the use of graphite-ceramic seals.
The device works by electricengine, which is a short-circuited system with components. The stator is located under the protection of thermoprotector, the latter takes over the function of emergency blocking. As buyers emphasize, this component turns off the engine if overheating of the winding occurs. Pump station "Dzhileks" capable of maintaining the necessary pressure, turning off and turning on the device depending on the flow rate. Units can be divided according to the principle of control. Some of them are based on the principle of automation, they have a surface accumulator, a pressure switch and a pressure gauge. The volume of the accumulator in this case is 24 liters. If we are talking about a pump of the 70/50 P-50 brand, then this indicator is twice as much, since a 50-liter horizontal accumulator is installed there. Model 70/50 N-50 DOM is equipped with a powerful controller that ensures effective management.
Review of positive qualities
Pump station "Dzhileks" has many advantages, among them are:
- reduction of starting currents;
- minimization of mechanical loads;
- the lack of hydraulic shock at the time of inclusion.
It should be noted and reliable protection against dropsvoltage, and the lack of dry running. A certain pressure is established in the pump and maintained during operation at a predetermined elevation. Dry running is eliminated due to the automation unit, which controls the amount of flow. Here is the threshold pressure.
Characteristics of the pump brand "60/35 N-24"
This pump station "Dzhileks" intendedfor surface installation, an increase in pressure acts as an additional function. The maximum head is 30 m, and the throughput is equivalent to 3.3 m3/ hThe power consumption of the device is 600 W, the water during suction should be clean, the size of the particles to be filtered is 0.8 mm. Permissible fluid temperature can vary from 1 to 50 ° C.
The equipment is supplied with a built-in ejector,which comes bundled in a single copy. The tank has a volume of 24 liters, as for the diameter of the outlet, this parameter is 1 inch. The power cord provides convenient operation of the pump, its length is 1.5 m. The pump should be installed horizontally. Permissible ambient temperature is 1 ° C and above. You can not be afraid of the fact that this pumping station "Jilex Jumbo" overheats, because the system has protection.
Characteristics of the pump "60/35 P-24"
This model has a maximum head equal to 35 m. The capacity is equal to 3.6 m.3/ hThe equipment operates from the mains voltage of 220/230 V. The power consumption is 600 watts. The diameter of the equipment outlet is 1 inch. The ambient temperature during operation of the device can vary from 1 to 35 ° C. Water level control is electronic automatic.
Overview of the 70/50 P brand pump
This pump station "Jilex Jumbo" is7500 rub. and is intended for use in the garden. Equipment must be installed on the surface. The device combines the advantages of a centrifugal pump and the practicality of a self-priming model. The unit is adapted to the operating conditions in Russia, where voltage fluctuations are frequent. The quality of the intake water may be different, in addition, it may contain a certain amount of gas. This equipment is intended to supply water from reservoirs, wells, wells, reservoirs and tanks.
Specifications model 70/50 P
If you are interested in pumping stations "DzhileksJumbo ", reviews of them are recommended to read before visiting the store. There is no exception to the model 70/50 P, whose power consumption is 1100 watts. This garden pump has a capacity of 3.9 thousand l / h. The maximum suction depth is 9 m, but the height of the water supply is 45 m. The device weighs 9.85 kg. The equipment has an automatic system that provides independent switching on and off, while the pressure will be maintained at a certain level. This ensures continuous operation.
The pump can be operated at a wide range.temperatures, but the temperature of the pumped water can lie in the range from 1 to 50 ° C. These pump stations "Jilex Jumbo", reviews of which are often quite positive, have an asynchronous squirrel-cage motor, a pressure gauge and a hydraulic accumulator. The use of graphite-ceramic seals eliminates leakage from the pump. The manufacturing process uses materials like glass-filled polypropylene, which forms the basis of the hull. Embedded threaded parts are made of brass, but at the base of the wheels - plastic material. The Venturi guide tube ensures productive and stable operation over a long service life.
Features of repair
Despite the fact that the described equipment hashigh quality, repair of pump station “Dzhileks” may be required. If you notice that there is a hum in the engine, and the equipment is choking, all this can cause problems with the impeller or engine. Disassemble the device and inspect it yourself. If the impeller cracks or bearings are out of order, they can be replaced with new ones and the device assembled in the reverse order.
