Cleaning sewer pipes: several ways to get rid of clogging

Cleaning sewer pipes isa mandatory procedure, if you notice that the water began to leave very slowly or stopped flowing altogether. The reason for this may be a fatty coating, trash entering the system or some object, such as a rag. Also, the problem may lie in poor water quality (if it is too hard). It is necessary to carry out cleaning regularly for the system to work for a long time and regularly. There are several effective ways: mechanical and chemical.

So, if you have a blockage, then firsta means of dealing with it is a plunger. In order to use it, you should draw water into the sink or bathroom (based on what kind of drain is clogged), and close the remaining drain holes. Now try to work energetically with a plunger and sharply tear it off. This procedure should be carried out several times. As a result, you will be able to eliminate the not very complicated blockage without using additional funds.

Clearing of sewer pipes in a difficult caseprovides for the use of a special cable, which at the end can be equipped with small blades. The product should be tough enough not to bend, bumping into a blockage, but it should easily overcome all the bends of the system. Pushing the cable into the sewer should simultaneously roll it in one direction. Stumbling on a blockage, try to turn the product gently and slowly until it breaks through the stopper.

Cleaning sewer pipes can alsomade with the help of water pressure under strong pressure. In this case, all holes, except for clogged, should be tightly sealed. If fat is deposited in the pipes, then hot water (boiling water) can be used to remove it. It should also be supplied under pressure. Sometimes various additional substances are added to the liquid that break down fat.

There is also a chemical cleaningsewer pipes, which involves the use of specific means capable of dissolving clogging. These substances can soften organic plugs and remove them from the system. In addition, in this way you can carry out additional disinfection of pipes. It should be noted that this elimination of blockages is not suitable for very difficult cases. It is better to use chemistry to prevent the appearance of deposits.

Cleaning sewer pipes canmade and safe folk remedies. For example, pour a few large spoons of soda (with a slide) into the sink, then pour the same vinegar and close with a cork. Leave for a few hours, and then rinse the pipes with hot water. The only drawback of this method is that after it remains a not very pleasant smell. However, it disappears quickly, and your system is further disinfected.

Today, you can count a lotorganizations that provide such a service as cleaning sewer pipes. The price depends on the complexity of the work, the tools and tools used.