Without improvised tools in the country or privateCompound today can not do. This is known to every property owner within or outside the city. For harvesting logs and creating hozpostroykrov require a saw, an ax or chainsaw. The latter is purchased more often than electric models for the reason that it is not tied to a power source. However, gasoline units differ in weight and configuration, so it is quite difficult to make a choice.
If you have not yet decided which version of the equipmentto purchase, then you need to figure out where the device will be used. The weight and power of chainsaws are designed for different applications. Manufacturers put on the market three groups of tools, each of which copes with the tasks, so it is important to determine what work you will perform on the site with the help of chainsaws.
Chainsaw is suitable for small garden workthe lowest power that belongs to the amateur class. It is designed for periodic operation, which does not exceed an hour per day. You can also find a semi-professional tool on the market that will be able to help even when building a house. If you are only at the initial stage of construction, it is recommended to purchase just such a chainsaw, which may weigh approximately 6 kg.
With the help of a professional saw you can evencut down the forest. The saw will cope with these manipulations throughout the day. If you still can not decide which device to buy, then you should stop focusing on the Huter BS-45 chainsaw, the reviews of which will be presented below. Its cost is only 4,700 rubles.
Description chainsaw brand BS-45
If you need a chainsaw, then you should payattention to the model mentioned above. It works at the expense of the engine, whose power is 2.3 liters. with. The tool is intended for domestic use, for example:
- small construction;
- garden care;
- sawing wood for the fireplace.
The chainsaw has a chain brake that providessafe operation. The manufacturer took care of the availability of a 45 cm tire in the kit. Among other things, the chainsaw has an anti-vibration system.
Specifications
Huter BS-45 – бензопила, отзывы о которой вы You can read in the article, has a rather outstanding technical characteristics. Among others, one should single out the width of the groove, which is 1.5 mm. The number of links is 72.
Шаг цепи эквивалентен 0,325 дюйма.The tire length is 18 inches. The capacity of the fuel tank is 0.55 liters. The power of a chainsaw is 1.7 kW. Quite often, professionals are interested in engine size, in this case this parameter is 45 cm.3.
Reviews about the model
Described in the article chainsaw "Huter", according to consumers, has many positive features, among them should be highlighted:
- convenience;
- efficient cut;
- safe work;
- safe hold.
As for convenience, it is providedthe presence of the air filter, which is reliably protected by a special casing. The latter can be easily opened using the swivel wheel. According to home craftsmen, the model described in the article allows you to achieve an effective cut. Suitable chainsaw for trimming small trees and harvesting firewood.
Chainsaw "Huter" is chosen by buyersquite often also because it ensures safe operation. If the front stop is affected, the brake will immediately activate and the saw chain will stop. The manufacturer has taken care of holding the tool securely in his hands. This was made possible thanks to the handle, which has a rather convenient shape. The lower part of the handle is extended, which protects the hands of the operator when the chain is broken. The described chainsaw, the photos of which are presented in the article, according to experts, has many additional advantages, among them it is impossible not to highlight:
- automatic chain lubrication;
- controls that are located on the handle;
- low weight;
- vibration damping system;
- reliability and ease of the tool.
Repair chainsaw
Chainsaw, photo of which you can find inThe article has a candle. When a tool breaks, it is first of all necessary to inspect this part of the mechanism. To do this, the wire is disconnected, and the candle itself is twisted with a key. If it is covered with black soot, it may indicate the use of low quality oil. Sometimes black soot indicates incorrect calculation of the ratio of oil and gasoline and incorrect adjustment of the carburetor. The candle is washed, cleaned of carbon with a needle or an awl, only after you can wipe the electrodes with the sandpaper.
If it is dry, the fuel mixture does not enter the cylinder. The problem in this case is not in the ignition system, so the candle can be installed back.
If the candle was spattered with fuel, thenan overabundance of the mixture can be explained by a violation of the rules of the launch or improper adjustment of the carburetor. Spark plugs should be wiped, cut off the fuel supply and turn on the starter so that excess fuel can be removed. After you check the combustion chamber, the candle can be set in place and the equipment can be restarted. Repair chainsaw Huter BS-45 can always be done independently.
Fuel supply system and repair
If you encounter a problem that is expressedif the fuel does not enter the cylinder, this may occur due to contamination of the filter. To solve the problem, the fuel hose is removed, allowing you to check how the fuel flows. Filter cleaning is required if the jet is rather weak. It should be removed or replaced with a new one.
Replacing the fuel filter is carried out once in athree months. Fuel may be absent or present in insufficient quantities. The cause is clogged air filter. When air ceases to flow into the carburetor, the engine is disrupted. The filter should be removed, cleaned in water, and then dried and set in place.
Cleaning the muffler
Quite often beginner home masterswondering why the chainsaw stalls. At low speeds, the tool can work flawlessly, but at large rpm it starts to stall. A malfunctioning silencer spark arrestor may result in malfunction. The silencer should be removed, disassembled and cleaned of carbon with detergents. The node is dried and installed in place.
It is important to remember that dry cleaningshould not be carried out, because carcinogens are present in the soot, their inhalation is dangerous to health. After the muffler has been removed, close the outlet with a cloth. Chainsaws "Huter", reviews of which are often the most positive, have a silencer. Its clogging can be prevented by monitoring the fuel mixture. The volume of oil should not be above the norm. If you use low-quality oil, it may adversely affect the operation of the engine.
Chainsaw disassembly
Любая техника время от времени требует ремонта, which is accompanied by disassembly of equipment. If we are talking about the described chainsaw, then first you need to remove the handle, mounted to the body with three rubber shock absorbers. To do this, remove the plastic plugs, and then using a screwdriver, you need to squeeze the upper shock absorber and the one that is located closer to the rear handle.
At the next stage, you can proceed to withdrawthe top cover of the case, for this, unscrew the four screws. The starter is removed simply, problems with this should arise. Then you can unscrew the internal cavity. The flywheel is twisted with effort, therefore for its removal the head with a metal knob is necessary.
Как только поршень в цилиндре окажется locked, you can unscrew the flywheel nut. Before disassembling the clutch is recommended to dismantle the drive sprocket. To do this, remove the lock washer and remove the asterisk, as well as the needle bearing. To remove the carburetor, you need a head for 8 and an extension cord. But first, the ignition wire and the throttle rod are disconnected. The assembly of the Huter BS-45 chainsaw is done in reverse order.
Instructions for use chainsaw
Capacity of an oil tank of the described modelchainsaw is 0.2 liters. However, this information is not the only one that the consumer must know in order to properly operate the device. It is important to familiarize yourself with the manufacturer's instructions. From it, you can learn about security requirements. For example, the use of the machine is prohibited in areas with flammable and explosive substances. The conditions of exposure to splashes and drops are also not suitable for the operation of chainsaws, as well as open areas with precipitation.
If during work you notice anyequipment malfunction, the use of the tool must be stopped. These cases include case cracks, chain slippage, tire deformation, fuel leakage and noises. It is important to ensure good illumination of the work area. The product should not be overloaded. It should be used strictly for its intended purpose. The workplace must be kept clean. Before turning on the chainsaw, it is worth checking whether you have forgotten to remove screwdrivers, keys and other tools from the working area.
Recommended Fuel Mix
Reviews of chainsaw Huter BS-45 should help youmake the right choice. But in the operation should be guided by the recommendations of the manufacturer. From them you will be able to learn that it is necessary to use the tool with a properly prepared fuel mixture. The oil must be of high quality and designed for air-cooled two-stroke engines. It is forbidden to use oil for water-cooled engines. The oil must be certified according to API classification (JASO), otherwise the operation of the equipment may lead to the engine running with a low level of lubrication.
The manufacturer recommends usingunleaded high-quality gasoline AI-92. When preparing the fuel mixture, you must use the volume ratio of gasoline and oil, which is specified by the manufacturer. If you have not seen the information on the packaging of oil, you should use a ratio of 40 to 1 (gasoline / oil). A mixing is recommended to use a measuring tank with graduations. Mixing ingredients in the fuel tank is prohibited.
Filling the fuel tank
Chainsaw Huter BS-45, instruction manualwhich comes bundled, must be operated with the fuel mixture poured into the tank according to the technology. The product should be positioned horizontally, turning the tank lid up. You must first turn off the engine and make sure that there are no sources of open fire nearby. The mixture should be prepared in such a volume that it was enough for only one filling. Fuel should not be left in the equipment tank.
Recommendations for work
Бензопилы «Хутер», отзывы о которых вы смогли read above, must be operated in accordance with the instructions. From it you can understand that you need to hold the device with two hands. If you do not control the process of cutting the material, then a back kick may occur. When the chain brake is working, it will protect the operator from possible impact.
The chain may be clamped by a log ifWood cutting is performed incorrectly. In order to eliminate such a development of events, it is important to determine how you will cut wood. You can start the process from the top, for this is done cut through a quarter of the diameter of the log. When sawing is not worth the effort, saw under its own weight will allow the process of sawing. If the chain is clamped, the engine should be stopped and the position of the log should be changed.
Maintenance
Отзывы о бензопиле Huter BS-45 довольно часто help consumers make the right choice in the direction of this model. If you have already become the owner of such equipment, you should be more familiar with the features of maintenance. It is important to ensure that the lubrication holes remain clean. They should not be lumps of dirt, foreign objects and oil clots.
Lubrication holes should be checked regularly andclean them if necessary. With the help of a grease gun, the operator will lubricate the driven tire star. Such manipulation should be carried out before the start of sawing. In order to regulate the amount of oil that is supplied to the circuit, use a pump regulator. To increase or decrease the amount of oil, the bolt must be turned to one side or the other.
Cost of spare parts and equipment
Довольно часто потребители приобретают ручной Chainsaw sharpening machine. Its cost may be different, but the most common models have a price ranging from 800 to 2000 rubles. When choosing such devices, it is important to pay attention to the number of revolutions per minute. In the case of the model DIOLD MZ-0.13, this parameter is 2500. Its power is 130 watts.
One more manual machine for sharpening chainsaw chains- “DIOLD MZS-01”. Its cost is equivalent to 2,200 rubles, while the power is 70 watts. You may also be interested in spare parts chainsaw Huter BS-45. For example, the piston can be purchased for 400 rubles. But the piston group will cost 1100 rubles. Piston rings are supplied to the market at a price of 150 rubles. The cylinder costs about 700 rubles, while the crankshaft costs 650 rubles.
