The processing of your land is verycomplicated. Therefore, in order to facilitate their own lives, many owners acquire special equipment. Motoblock - one of the most popular types of vehicles. But even he will not save, if there are no additional adaptations. Of course, everything can be purchased at the store. But in order to save financial investments, you can make the same adapter for motoblocks with your own hands. This requires a little knowledge, a simple set of tools and materials.
The concept of an adapter
Before asking how to make an adapterfor motoblock, you need to have a clear idea of what it is. It represents a special design, which allows you to ride on the motor block. Thanks to its presence, you can no longer follow the technique, but manage it while sitting behind.
The adapter does not interfere with working with other devices (plow, sandwich, hillrock and so on). On the contrary, it speeds up the work. At the same time, the speed of operation increases approximately twofold.
Device module
The adapter allows you to make a mini-tractor from a motoblock. Among its main elements are:
- Ramu. All other details are attached to it.
- Axle with wheels.Wheels can be metal and rubber coated. The first option is only suitable for working in the garden. The presence of a rubber protector allows you to move even on a dirt road.
- Trailing device. It is necessary for connecting the motor block with towed equipment.
- The driver's seat. It allows you to conveniently sit while working.
A special design is used to control the unit. Depending on its design, the adapters are divided into two categories:
- With the wheel, the drive of which is represented by a separate node. Between the adapter and motoblock a rigid coupling is organized.
- Control is due to a change in the angle between the adapter and the motor block. In this case, the joint is mobile.
The adapter for the motor block with the steering wheel is more difficult to manufacture. But with a moving joint it is much more difficult to control machinery.
Necessary materials and tools
To make an adapter for motoblocks with your own hands, you can use the following materials:
- Metal profile, channel.
- Steel sheet for making a stand under the feet.
- Metal corner.
- Wheels (2 pcs.).
- Fastening elements (bolts, nuts).
Making an adapter for motorized blocks with their own hands, tools should be taken with a welding machine, a Bulgarian and other hand tools (wrenches, hammer, etc.).
Manufacturing process
When you build a self-made adapter formotoblock, the drawing is simply necessary. You can draw it yourself if you have skills in this area. If not, a suitable scheme can be selected from the ones already available. Before you start, it's best to check all the numbers indicated there. One of the options is shown in the figure below.
The preparation of the adapter begins with the preparation of the frame. For this, the metal elements are cut by the Bulgarian in the dimensions indicated in the drawing. Connect the elements by welding or using bolts.
Then proceed to the running gear.If the motor block motor is located in front, the wheels are fixed taking into account the width of the track of the base wheels. The wheel axle is made of a metal pipe. On the edges are mounted bushings and bearings, on which the wheels are mounted.
In the case of rear engine positionshould be a bit wider. Otherwise the motoblock will not be able to balance normally during operation. The best option is to install a wider bridge on the motoblock.
As a helm you can leave the handle from the motor block. The second option - to install the steering column, taking the necessary elements from the motorcycle.
The seat can be removed from the car. And you can weld something like a bench from metal corners and attach on top of the board. In the first case, a sled must be welded to the frame.
Working with attachments will help the hydraulic system and a special bracket (for example, to work with a plow). You may need a towbar if you plan to attach a semi-trailer.
Coupling is made according to the scheme shown in the figure below.
Selection of a suitable option
Assemble the adapter for motoblocks with your own handsnot difficult. But for this it is necessary to choose the right equipment option. Adapters can have a different design. In simple terms, they can be simple (for movement) and complex (for soil cultivation). And there are universal, which allow and process the soil, and transport cargo.
In addition, the choice of adapter depends on the powertechniques. If the motoblock has a high power, it will be able to work with a long-haul adapter. Conversely, at a low power, only a short one will do.
Homemade adapter for motoblock will be by its characteristics no worse than bought in the store. With his functions he will cope perfectly well. And thus it will cost much cheaper than the factory one.
