Now in the building stores you can findA variety of materials used for the production of fences and gates. Most often it is wrought iron, wood and metal. But gradually the leading position begins to occupy such material as profiled, which is preferred by more and more site owners. This material is a galvanized sheet steel with a polymer coating.
What so attracts builders and owners of countryhouses in a professional flooring? First, it is a very light material, well-manifested during operation. Secondly, it is easy to install. We will try to confirm this in practice by learning how to make a sliding gate of corrugated flooring with your own hands (you can see the photo of the scheme in the article). We will also understand its varieties and try to find the best option.
Varieties of gates of corrugated. Features of their design, advantages and disadvantages
Consider the positive aspects of fencing of this material:
- Profiled sheets can save money, since their price is significantly different from forged products or wood.
- Ease of installation and manufacture of finished parts.
- High service life.
- Gates can be of different designs and controlled in different ways due to the functionality of corrugated flooring.
- Because the professional flooring is made variouscolors, you can choose a color that will fully meet the aesthetic requirements of the customer and in harmony with any elements of the exterior on the site.
Types of gates of this material on the method of opening
- Backwards.
- Sweeps.
- Sliding.
- For garages.
- Swivel.
The most common types are sliding gates and swing-type gates. Below we analyze both options. We will also learn how to make sliding gates of corrugated flooring with your own hands.
Gate of an oar type from a professional flooring
This performance is classic, and manyaccustomed to seeing this particular option on the plots. The design is carried out in the form of two pillars, on which the gate doors are decorated with professional flooring.
Due to the fact that racks are usedbearing hinges, smooth opening is achieved. A door or wicket is usually located in the next section of the fence, however, there are cases when the wicket is installed in one of the gate sections.
Opening is achieved by manually actingor automatically, using an automatic electric drive. Most often, the drive is used for entrances to industrial facilities and other non-residential areas, but lately, more and more automation that controls the gate is used in the construction of private houses. It is worth noting that due to the use in the manufacture of corrugated doors, you can save on the purchase of a drive, because the gate is easier to obtain similar models from other materials, the drive is suitable and low power.
Swing gates cause great interestdue to the availability of materials and ease of work. However, in cases where there is no space for the sections to open, this option will have to be swept away and figured out how to make a sliding gate out of corrugated board with your own hands.
Gate from a professional flooring retractable
Such gates are considered more convenient inoperation due to their functional characteristics. The thing is that at the opening they drive off to the side, respectively, without occupying the useful space in front. If the territory is not conducive to the use of swing gates due to the lack of free space, this type of fence will be simply indispensable.
Construction can achieve a very wideopening for traffic, because in length such gates reach ten meters. Using the sliding gates in the winter, you can not spend a lot of time on thoroughly cleaning the snow, because drifts will not prevent the opening of the sash, as it happens when you open a swing door. Also, thanks to the design, eliminating guides in the opening, you can not worry about the passage of cars of any height. It is worth noting that the use of sliding gates without automation is very inconvenient due to the large dimensions of the sash, so if you are thinking about how to make a sliding gate of corrugated board with your own hands, you should consider the moment of purchase of the drive.
Let us highlight the main disadvantages that are present at the sliding gate of such a plan:
- The design of these types of gates involves the use of a strong foundation, which increases material costs.
- It is also necessary to use special components designed to organize the proper operation of the gate.
- And finally, the installation of these types of gates is more complicated and, as a result, more expensive.
What to look for when purchasing a professional sheet?
В первую очередь надо ознакомиться с маркировкой and type of coverage. This material can be different in thickness, shape and height of the cells. How tough the future gate will be depends on the size of the protrusion on the profiled sheet.
We give some notation used in the name of this material, which will help to figure out how to make a sliding gate of corrugated board:
- With - the professional flooring, suitable for barriers, a small thickness and height of a profile.
- NA - material of a universal type. Suitable for fences and gates, and for the roof.
- H - a powerful decking, suitable for the construction of hangars and large spaces. As the material for the gate does not apply.
- The numbers in the designation indicate the height of the profile.
It is worth noting that for the construction of fences andGate manufacturing use such profiled sheets as C8 and C10, with the height of the ribs of 8 and 10 mm, respectively. The thickness of the material grade C8 is equal to 0.4 mm, and they weigh about 5 kilograms per square meter. The weight of the square of the C10 sheet is greater - about 7 kilograms due to its greater thickness.
Decking for the gate is not only galvanized, italso coated with a polymer compound that prevents the material from mechanical damage. As mentioned above, a large number of color options, so, looking at the samples in the store, you can understand how the desired option looks alive, and decide whether it will fit into the exterior.
Retractable gate from a professional flooring with their own hands
As already noted, the installation of this gatewill require great effort. However, everything will be up to you if you understand the design features and understand the way in which the sliding gates are made of corrugated flooring with your own hands. Photos and videos of this process will undoubtedly make it even easier.
Training. Purchase of components and drawing up a drawing
We give a list of necessary parts. Without them, it is impossible to make a sliding gate of corrugated flooring with your own hands to the cottage:
- Guide rail. The length is to choose from the following calculation: width of the opening x 1.6. Thickness will depend on how much the gate weighs.
- Roller carriage in the amount of two pieces.
- Two catchers for the top and bottom of the gate.
- Board designed to stabilize the gate when opened.
- Roller rolling, designed to reduce noise operation.
If you plan to make a sliding door of corrugated flooring with your own hands without a drive, then the following materials do not need to be purchased:
- gearbox;
- gear rack;
- control device;
- mounting device;
- photo cells and warning light.
We have already noted the need for careful planning before you start to make sliding doors of corrugated board with your own hands. Drawings should include the following information:
- The length of the gate panel.
- Width counterweight.
- Gate height.
- The length of all jumpers.
Preparation of the foundation and pillars of the support
First you need to put in the ground pillars that will hold our structure. Consider what the pillars are made of:
- channel;
- steel pipe;
- oak timber;
- brick or concrete with mortgages.
Mounting support column
A recess is digging below the groundwater freezing level; a pillar or pipe is set up with the help of the construction level. Then all you need to pour the solution and wait for it to dry.
Что касается фундамента под сдвижной тип ворот, here you will need a channel up to 200 mm wide and 14-mm reinforcing bars. First is the "bench". The rods are cut to the desired length and welded to the channel. After that, you need to dig a dimple of the following form: in the locations of the columns about one and a half meters, and between the columns - up to half a meter. The bottom of the recess should be provided with a sand pad. At the end, you must place the "bench" in the pit and level it. After pouring, the foundation must be left to dry for a week.
Gate frame
Для его изготовления будут нужны трубы 60 х 30 мм and 40 x 20 mm. According to the drawing, it is necessary to cut pipes of the desired length; a Bulgarian will help with this. After that, they must be cleaned, degreased and painted. In order for the sliding doors made of corrugated board to be installed at home, look best, it is recommended to cover the pipes with paint before painting. First of all, the outer frame is welded together, and then the inner one is welded. As the professional flooring will be fixed on an internal framework, it is necessary to think over distance between crossing points.
Gate trim profiled
This stage is the final, in order to make an improvised sliding gate of the flooring with your own hands. The following actions are required:
- First you need to install the frame on the hardened foundation.
- It is necessary to attach rollers to the channel of the stool. It is recommended to arrange them as far as possible from each other, but taking into account the fact that the end roller should not reach the plug when closing.
- Next on the rollers you need to put the gate and put them on the level.
- If everything is smooth, you should scald the platforms of carts.
- Then grabs the trailer and traps.
- It is necessary to check that the roller coincides with the lower catcher and the verticality of the installed frame.
- In the end, it remains only to sheathe the frame with a professional sheet.It is best to try to use fasteners evenly. It should be noted that the professional flooring is best fastened with screws or using rivets. Rivets will look more aesthetic, but if you want to remove the sheet, for example, for replacement, it will be very difficult. It is necessary to fasten only in the grooves of the profile, and the gap between the fasteners is not recommended to be made too large. This is because with strong gusts of wind the sheet can tear. The best option - per square meter sheet 6 screws.
Conclusion
На этом все.We figured out the question of how to make a sliding gate of corrugated board, now it remains to use and count the money saved. In the end, I would like to note that when choosing a gate to your site, you should consider all the options. The information above will help you decide which type of door is best for you, as well as which materials for installation are preferable to use.
If the dimensions of your site allow you to placeit has swinging gates, then this opportunity should not be neglected. After all, the foundation and components will be much cheaper. If only the use of a retractable type of gate is possible, then it is worth remembering that for him it is better to provide for automation. And the rest of this article will help you.
So, we figured out how to make a sliding gate of corrugated flooring to the country.
