During operation, the iron is often coveredburns, and scum may form inside. If you pay attention to cleaning in time, there is a chance to return the old look to the home appliance. Otherwise, you will need a new iron soon.
Timely cleaning allows you to return the old radiant appearance of household appliances. To do this, use different recipes. How to clean the iron at home, we will tell you further.
Rules for using the iron
Before you consider how to clean the iron at home, you need to familiarize yourself with the rules of care for the named device. This will avoid the need to thoroughly clean household appliances.
- In the process of ironing need to put the righttemperature conditions. Otherwise it will harm not only the iron, but also the fabric. Thin silk, synthetic fabrics can not be ironed at a high temperature, otherwise the marks of burns will remain on the sole of even the most expensive model.
- After ironing is completed, each time you need to wipe the soleplate with a soft, lint-free cloth.
- Do not pour liquid into the water compartment.from the tap. In this case, scaling forms. Only distilled or filtered water that leaves no limescale will do. By the way, when stripping it will fly out from the nozzles of the sole, leaving white marks on the fabric.
Salt and paraffin
There are many ways that allowclean the iron at home from carbon. So, there are special pencils on sale with which you can achieve high results. However, these tools are not always available at hand, so they use special recipes that allow you to quickly cope with soot.
One of the most popular cleaning productsthe sole of the iron is salt. It is necessary to pour it in a uniform layer on a sheet of paper or fabric. Next, turn on the iron and rotate them for a few minutes. The action continues until the surface shines.
Another popular method is to useparaffin candles. It is wrapped in natural fabric (preferably cotton) and rubbed with it the surface of the iron (it must be heated). Under the candle you need to put the pan. Molten paraffin will flow into it.
After this procedure, you need to clean all the pores, uneven terrain from the remnants of the candle material.
Hydrogen peroxide and vinegar
It is very important to determine what material the sole of the iron is made of. For teflon and ceramic devices, abrasives are not suitable.
It is important to choose gentle formulations. In this case, considering how to clean a Teflon iron at home, you should adopt a few simple recipes:
- You need to prepare hydrogen peroxide.A cotton swab is moistened with this substance, and with it is used to scrub the burned spots. The iron must be disconnected from the socket at this time. Such processing is carried out only for a cold surface. Peroxide softens the burn layer and can be easily washed off.
- Vinegar also allows you to quickly deal with darkspot. If the burner is very strong, ammonia is added to the vinegar in equal proportions. In this solution, moisten a cotton swab, which wipe the surface. If this does not help, you can soak a cloth in this solution. It is placed on the sole and left for several hours. During that time, the burner will soften under the influence of vinegar.
Features of cleaning aluminum surface
Рассматривая, как почистить пригоревший утюг в home conditions, you need to consider the type of material of its soles. The most capricious of them is aluminum. This surface cannot be cleaned with salt, as it is easy to scratch. And in this case, your ironing device will not work correctly.
Experts suggest using a simple recipe:
- If carbon deposits appeared on the aluminum sole, you need to make a thick solution of soda and dish detergent.
- It is applied to the surface of a cold iron and left on the sole for several hours. During this time it will soften the pollution.
- Wash off such a composition should be a wet cloth. This is done carefully so as not to leave traces of detergent.
- Next, wipe the surface dry, trying not to leave on the surface of the stains or lint. For this you need to use special wipes.
This method will help to clean the surface, which is even unstable to mechanical damage.
Ceramic iron
There are many ways to solveproblem if the iron burned. How to clean a ceramic floor sole at home? This is also quite capricious material. It, as already mentioned, can not be cleaned with abrasive compounds, so we use one of the simplest recipes:
- You will need to prepare a solution of water and citric acid. In this tool moisten the fabric.
- It squeeze and impose on a ceramic surface. Here the fabric remains for several hours.
- Then the same solution is used to clean the surface. Rub the surface with a soft towel. However, you can not use brushes, hard washcloths, etc.
If the ceramic iron is very dirty, you need to mix vinegar with ammonia:
- This composition is impregnated with fabric.
- Further, the iron is plugged into the socket and is very hot.
- They iron the prepared fabric until the surface is clean.
- Next you need to turn off the iron and wipe with a clean dry cloth.
Teflon iron
Considering how to clean the soleplate inAt home, you need to pay attention to Teflon varieties. They also need certain care, which should be as gentle and gentle as possible:
- For such a coating suitable recipes with salt and paraffin. These two tools can be combined.
- Paraffin is crushed. For this candle rubbed on a grater. It is better if the baby is small.
- Next, paraffin mixed with salt.
- Prepare a thick natural fabric. On it lay a mixture of paraffin and salt.
- It is covered on top of thin matter.
- Iron needs to be heated. Optimally, if the temperature is set at about 110 ºС.
- The prepared composition is ironed.
- When the sole is clean, turn off the iron and allow it to cool, and wipe the surface with a dry clean cloth.
Steel sole
Previously, all irons had a steel sole.They were not afraid of mechanical effects and other adverse factors. Considering how to clean the coating of iron at home, if it has a steel sole, you can use different methods.
This material can be cleaned with an old toothbrush:
- To do this, prepare a soap solution. It is mixed with baking soda.
- Next surface tinder until it becomes clean.
Можно применять различные моющие средства.Also, steel iron can be brought into proper form with virtually all of the above recipes. The choice depends on the degree of contamination of its surface. For strong burns you need to use a mixture of vinegar and ammonia. With their help the surface is soaked for several hours. After that you can clean with soda.
Some more recipes
There are some more recipes than you canclean the iron at home. They are quite simple, so they are often used. If the stain has just appeared, you should immediately rub it with a piece of soap. Then the iron is disconnected from the network. When its surface cools down, you need to wipe the carbon with a damp cloth and wipe dry.
In case the sole is accidentally stuckpolyethylene or other artificial material, it can be easily removed. Acetone is used for this. Liquid for removing varnish moistened cotton swab, which is treated with a contaminated surface.
You can get rid of soot with alcohol.But this method works only in the case of moderate surface contamination. It should be remembered that the knife, sandpaper or other abrasives are not used to clean the soleplate from any material. This can greatly harm the technique.
Descaling
Often there is a need to clean the iron fromscum at home. If this is not done, the nozzles will become clogged with lime. In this case, the clothes will remain dirty stains. In order not to spoil things in the process of using the iron, you need to properly clean the inner water tank.
Many models of technology have built-in self-cleaning function. There is it or not, you need to clarify in the instructions, which describes in detail the cleaning algorithm:
- As a rule, you should first pour the maximum amount of water into the iron chamber.
- Next, set the temperature control to the highest position. And turn on the iron in the socket. It will heat up and then cool.
- Then it is tilted over the sink or prepared container and press the self-cleaning button.
- The scale together with the steam will be taken out of the tank, after which the iron is turned off and wiped dry.
Lemon acid
Существуют и иные способы того, как почистить iron inside at home. Not every model has a self-cleaning function. If the manufacturer has not provided for its presence, then you need to use simple recipes. They will help to quickly solve the problem appeared in the tank scale:
- Need to take two teaspoons of citric acid.
- It is dissolved in a glass of water. This solution is poured inside the iron.
- After that, the device is plugged in. It needs to be heated to the maximum.
- The iron is shaken several times and the steam release button is pressed.
Please note that this procedure is necessary.hold over a pre-prepared bowl, since the scum will fly out from the nozzles of the soles. It may have a dark shade or be yellowish. Color depends on the composition of the water in the area.
After cleaning, rinse the tank with distilled water, and wipe the sole dry.
Sparkling water
Scale iron at homeYou can also use ordinary soda water. It contains acids that act on limescale. After this treatment, the deposits are destroyed and brought to the outside.
Нужно влить минеральную воду в резервуар.And then do the same way as in the recipe with citric acid. The iron is heated and press the steam button. When the procedure is completed, you need to rinse the inside of the device with distilled water.
After the scale passes through the nozzles, itmay remain in small quantities in these holes. They can be removed with cotton swabs to clean the ears. They remove impurities from the nozzles. If necessary, they can be moistened in vinegar.
How to prevent scaling?
There are many ways to clean your iron.at home. However, it is better to carry out a number of preventive actions. This will help prevent frequent clogging of the inner tank. The quality of water depends on how often you need to clean the iron from scale.
As already mentioned, the best for refuelingThe tank will be distilled water. It can be purchased at gas stations and bus stations. This is not the only option. Suitable for iron and drinking water, which is sold in bottles in almost any supermarket. It undergoes high-quality cleaning, which allows the use of such liquid in the process of ironing.
If there is a filter at home, water from it can also bePour into the tank. The main thing is to monitor the frequency of cassette replacement. Otherwise, hardness salts will still settle on the walls of the tank. You can also just infuse tap water for several hours. During the night, hardness salts will precipitate.
Considering how to clean the iron at home, you can do the right care yourself. And your home appliance will acquire the same brilliance and retain its functionality for a long time.
