Стены фасада считаются самым уязвимым местом any structure. Every day they are exposed to aggressive environmental influences, because of which they quickly lose their original appearance. So that over time the building does not lose its strength and presentability, its outer surfaces are protected by various finishing materials. One of them is an innovative product that has recently appeared on the market - Hauberk facade tiles "TechnoNIKOL". Customer reviews characterize it as a quality, easy to install, inexpensive lining, and what other properties it has, we will tell in our article.
Product Description
Hauberk tile is a modern material forexterior finish, which is made on the basis of fiberglass sheet with the addition of improved bitumen and basalt granules. This facing is presented as a rectangular flexible strip, the lower part of which is divided into several fragments.
When superimposing strips on each otherthe surface forms a peculiar relief, imitating expensive brickwork, which makes it possible to give any building a very presentable appearance. However, the ability to modify structures beyond recognition is not the only advantage that Hauberk facade tiles have. Reviews of this product emphasize its light weight, ease of installation and durability.
Scope of application of this material - facades of wooden, frame and block structures. It is also possible to use flexible tiles for decorative decoration of fences and other fences.
Material Specifications
Characteristics of the facade tiles Hauberk manufacturer indicates the packaging of the goods. They look like this:
• height of one strip - 250 mm;
• width of each cladding element - 1000 mm;
• sheet thickness - 3.5 mm;
• weight of 1 m² of finished coating is 12.8 kg;
• mass of one package - 25.6 kg;
• resistance to heat - up to 100 degrees;
• coating the outer side of the sheet - basalt;
• protective layer of the inner side - quartz sand.
To calculate the required amount of materialshould be guided by the information that each package contains 20 sheets of coating. They are enough to create a 2 m² facing. In one pallet holds 40 packages of finished products, from which you can finish an 80 m² surface.
Advantages of facade tiles "TechnoNIKOL" Hauberk, owner reviews
The main advantage of bitumen tiles isits flexibility, which allows without any difficulty to produce lining of buildings of complex geometric shape and hard-to-reach areas of the facade. Finishing visors, gables, entrance and window openings also will not be difficult. The lightness of the material allows its installation on any type of building (without strengthening the foundation), since it does not exert a significant load on the foundation of the building.
The second advantage for which the front is valuedtile Hauberk, - the prices of all its varieties are quite democratic. The average cost of 1 m² of flexible finishing is 300-370 rubles, which makes it much more affordable than clinker brick or stone.
In addition to the above facts, the owners of this cladding highlight the following positive qualities:
1. The strength of the upper layer. The basalt covering is very carefully tampedin the basis of the sheet, so that the granulate is not showered during the entire life of the material. It is also important that the natural protective layer does not fade in the sun, which means that the lining retains its original color saturation for a long time.
2. Easy installation. To work with bituminous materials do not need special skills and the presence of a special tool. The tile is light enough, which greatly facilitates its installation and allows you to do the work yourself.
3. Tightness. The flexible coating does not allow moisture, which significantly extends the life of the walls of the facade and the building itself.
4. Environmental Resistance. The production of Hauberk tiles is carried out in Russia, so the material is intended for use in harsh climates with high temperature fluctuations.
Assortment of facade tiles
The company "Technonikol" offers its buyer six varieties of Hauberk tiles, while the texture and shape of all the options are the same - "under the brick", but the color scheme is different.
• sandy;
• terracotta;
• beige;
• marble.
Complement the basic color palette "burnedbrick "and" antique brick ". All options are decorated with several shades of basalt coating, which allows to achieve the uniqueness and expressiveness of color.
Component materials
The installation instructions for the Hauberk facade tile indicate that in order to properly fasten it, you will need to purchase special component materials.
Namely:
• metal corners;
• window trim;
• two-component adhesive;
• special galvanized nails.
Metal corners are needed for registrationexternal and internal corners of the structure, slopes. For finishing the window and door openings using wide trim. The bituminous tile is attached to the base with a special glue (Hauberk-88) and galvanized nails with a wide bonnet.
Preparation of the basis for installation of a tile
Now consider how it is fixed to the basefront tile "TechnoNIKOL" Hauberk. The instructions for its installation indicate that the fastening of the facing material is carried out only on flat wooden surfaces. Therefore, before starting to work, the facade of the building must be sheathed with plywood or OSB.
Wooden bar is used for this purpose.(25 mm wide). It is attached vertically, at a distance of about 30 cm from each other. Initially, control bars are fixed to the wall. They are spaced apart by the width of the CAP, and already between them are fixed intermediate elements of the batten.
When the frame is ready, proceed to the installation themselvesplates Here you should pay attention to the fact that if the building does not have a base, then the lower part of the wooden frame (to a height of 15 cm) is treated with compositions based on copper oxide, and only then the base plates are fixed (with the seam displaced between adjacent rows). Between the sheets leave a gap of 2-3 mm to eliminate thermal expansion of the material.
Installation of bitumen sheets
Installation of a front tile "TechnoNIKOL" Hauberkbegins with drawing on the basis of control lines. On them in the course of works the sheet of a bituminous covering will be leveled For rooms with base installed low tide.
It is recommended to mix before installation.several packs of tile. This will help to avoid color imbalance in case the shade of products in different packs will be different. Next, remove the film from the tile, which covered its sticky areas. To create the first row of leaves with cut petals. This is necessary in order to get a solid foundation.
The installation of trim elements starts from the bottom.sides of the corner of the building, with a margin of 10 mm from the edge. Each sheet is fixed to the base with 8 nails. All subsequent rows of decoration are fixed with an offset to the floor-brick. In this way the entire building is faced. At the openings, the tile is trimmed with a knife, and the corner itself is formed using the corners and ebbs. At the top of the opening tile is mounted on top of the corner. This avoids water flowing under the cladding.
Планки крепятся к основанию при помощи саморезов, after which their caps are coated with glue and crumbled from tile. The excess petals are trimmed with scissors. The upper frame trim is carried out by any convenient material.
Conclusion
Front tile "TechnoNIKOL" Hauberk reviewshas only positive. This explains a number of its advantages over other materials and an acceptable cost. As you can see, the process of its installation is also quite simple, which means that this material is very relevant today.
