A hill made of snow with your own hands is an ideal occupation for adults and children. After all, you have to spend only a few hours on the construction of the structure.
All together we begin
Как залить горку из снега?For this we need only a little - snow, desire and enthusiasm. Well, even a few hands. Well connect to this business kids. After all, a hill of snow, made with your own hands, will be especially loved if a piece of your work is invested in it. More young children can be charged with the most simple and elementary work, for example, to bring snow in children's buckets or roll snowballs. Older children can be puzzled by the construction of stairs. Well, the more experienced one can even be trusted with pouring water. Believe me, the process of building a slide of ice and snow will be remembered for the rest of their lives. It's so exciting!
Required inventory
Before building a hill of snow, let's preparetools and accessories that will be needed for work. There should be a lot of snow so that you can build a frame and steps out of it, as well as pour slides during the operation. You also need to cook:
- shovels (by the number of employees);
- pieces of plywood (you can take a used, not necessarily whole);
- water
It is advisable to equip kids who arewill help you with the construction. After all, the main thing in this business is not to get sick, and not just the solution of the question: "How to pour a hill of snow?" Therefore, children are better to wear waterproof overalls, as well as stock up with a few pairs of mittens. Make sure that the kids do not sweat and do not unfasten at the same time, otherwise it is very easy to catch a cold.
Specifications
Any construction project must have its ownoptions. They depend on the age of those who will ride a makeshift slide. If these are teenagers and adults, you can safely build a hill with a height of one and a half to two meters. If on this snow attraction kids will ride, then the height of the slide should be no more than one meter.
The length of the descent so that it is easy and not dangerousride, you should provide about 5 meters. It is very important to calculate the descent angle. The slide should not be made too steep, the slope should be about 40 degrees. If you make it bigger, then the pleasure of
The width of the slide must be sufficient toyou could slide on a sled. This is about half a meter, not more. When you have thought about how to pour a hill of snow, do not forget about the sides on the descent, to ensure safety. Otherwise, the little ones risk falling before reaching the end.
Do not forget about the reliable steps - it will be easy to climb the hill, and if you sprinkle them with sand, they will no longer be slippery.
Advantages of the snow slide
If you make a slide at the beginning of winter, thenThroughout the snow time it can be improved and modernized by adding arches, turns, making branches, sprinkling and decorating with snow sculptures. The advantages of this design are obvious:
- construction can be carried out with children of different ages;
- no special costs for expensive materials or specific tools are required;
- You can experiment and apply your own design.
Before you pour a hill of snow, you mustchoose a convenient place. It is very important to locate it away from the roadway and away from the paths. See how well it will be lit in the evening, as it gets dark early in the winter. Choose its location so that there are no shrubs and trees nearby, no fences and hatches, pillars, nothing that could pose a danger to skiers.
Shovels in hand - and forward
Better, of course, podgadat when it comesrelatively warm day. Then the snow will be sticky and the construction process will be much easier. How to blind a hill of snow? For a start we roll a few snow balls of different sizes. We put the biggest one in the base, then install a smaller ball and so on until the descent. The empty space between them is covered with snow and tightly tamped.
Then we form the steps.They should be wide enough and not too tall. It is recommended to lay sheets of plywood on the line of descent - then the surface will be flat and smooth. Plywood should be covered with snow and tightly tamp the surface thickness of about 10-15 centimeters. Then, after filling with water, the descent will not sink and no holes and bumps will appear on it.
Fill several times
When the frame slides ready, it remains only to fill the descent with water. It is best to repeat this several times over several days so that the ice layer is strong.
Если на улице уже стоят морозы и выбрать теплый Since the day for the construction of the slide is impossible due to meteorological conditions, the formwork can be installed from plywood and wooden shields and snow can be poured into it.
Also from snowdrifts that are well compressed, it will be convenient to cut snow bricks. They are placed, for example, at the base of the steps.
Ступеньки первоначально тоже стоит залить водой — then they will gain a fortress and will not crumble under their feet. As soon as they are well chilled, they must be sprinkled with sand so that the children can climb them without fear.
Think about the top platform of the snow hill.It must be flat, safe and relatively large so that the child does not fall off of it. You can also lay a board or plywood on top of it. But you should definitely ensure that the ground is not slippery.
You can make two descents from one platform:one is steeper, the other is more gentle. Do not forget to decorate your slide with an arch or a cheerful snowman - your attraction should be not only functional, but also aesthetically appealing.
