Rubber seals: characteristics, advantages, installation features

To ensure reliable heat and sound insulationWindows and doors need to be sealed with a sealing profile. How to choose and install rubber seals? Let's talk about this in this material.

The quality of the material

Rubber is extremely commonmaterial widely used in industry. If we talk about rubber seals for windows and doors, the latter has good elasticity, is able to withstand the effects of low and high temperatures, the influence of other environmental factors.

The service life of the sealing profile made from this production base is about 10 years. However, only with the right periodic care.

Seal Care

To reduce the chance of dust entering,dirt and cold in the room during operation rubber seals must be periodically cleaned with a damp sponge. Also not superfluous is the treatment of their surface with a special silicone-based protective agent. Alternatively, glycerin can be used as a replacement for silicone. To ensure that the rubber seals last as long as possible, it is recommended that you perform the procedure at least twice a year.

Rubber seals - functions

The compactor is the fitting element of the window and door profile. The list of its main tasks includes:

• prevention of penetration into the room of extraneous sounds and smells;
• prevention of drafts;
• sealing joints - ensuring reliable joining of structural elements.

Benefits

What are the advantages of rubberwindow seal? First of all, such profile products are characterized by endurance and special durability. An important factor for the majority of consumers is the low cost of such products.

Seals in this category are made of acid resistant rubber. Such material is distinguished by high-tech performance and, accordingly, excellent quality.

Preparing for installation

You can install the rubber seals yourself without the help of experts. However, before starting work, it is necessary to remove the old insulation profile.

To cope with the task is not so difficult.It is enough to use a sharp blade or spatula. After releasing the grooves from the old seal, the surface must be removed from contamination and carefully wiped from dust. This is required for better quality docking of the adhesive solution and, accordingly, the realization of the qualities of the future profile.

Installing the adhesive seal

Self-adhesive rubber sealsMounting is much easier than products that fit into a groove. For installation, it is only necessary to rid the device of the protective coating in the form of a tape, and then proceed to gluing it around the perimeter of the window frame or door leaf.

If the self-adhesive rubber seal does not fit enough to the surfaces, to ensure reliable joining, the connections can be additionally treated with glue or sealant.

During the replacement of the sealing profile is notIt is recommended to use separate pieces of material. As in this case the probability of insufficiently high-quality sealing of the joints increases.

Special attention during installationshould be paid to the imposition of material in the corners of structures It is in these places that the risk of poor adhesion and wrinkling of the seal increases significantly.

Helpful Tips

There are a number of recommendations that can be useful when installing a sealing profile:

1. When sealing entrance doors that go outoutside, it is advisable to resort to the installation of several layers of rubber seal. And one of the layers is to impose directly on the door frame.
2. When buying branded windows or doors from trusted manufacturers, the seal must be included. Therefore, before you take the purchase, it is worth once again to check its availability.
3. For reliable fixing of a rubber sealing profile it is worth using silicone glue. The use of this approach to installation contributes to the most reliable sealing joints.
4. It is not recommended to overlay the seal on the freshly painted surfaces. For a good fit of the product, it is desirable that at least two weeks pass from the moment of painting.

As you can see, just a few simple steps.separate people from creating comfortable conditions for living in their own home. At the same time, in order for the compactor to last as long as possible, it is necessary to ensure regular care of the material at the joints.