Car "Moskvich-2141", the tuning of which cando it yourself, made on AZLK. During production, about 800 thousand copies were produced. They are presented in two versions: standard and modernized with the motor from "Renaulta". The second modification differs in size, shape and chassis. Consider the possibility of improving the car, serial production of which is discontinued, but it can often be found on the roads.
Lighting elements
Tuning "Moskvich-2141" often start withmodifications of appearance. A big aesthetic and practical role in this is the replacement of optics. This is due to the fact that native lights do not illuminate the road very well and have a rather primitive form.
There are several options for improving optics.considered cars. The cardinal decision will be the replacement of rectangular elements with round counterparts. For this purpose, you can use affordable headlights from the VAZ-2106. They should be mounted on two pieces on each side, while having to do without installing the factory grille, since it is intended for rectangular-shaped illuminators. As an option, you can use a metal frame grid, securing it securely in front of the machine. It is advisable to install turn signal repeaters, since the triangular niches in the wings will need to be brewed.
For those who choose this option, not superfluouswill install a turn indicator above or below the round lights using SMD 5050 type LEDs. This light strip has 3 times more power than the closest competitors. When choosing lighters consider their protection from moisture. If desired, you can use two pairs of ribbons or additional factory indicators, which are mounted on the sides of the wings.
What to change in the cabin?
The model 2141 tuning this element is better to start.from a torpedo. There are several options for the replacement: "Nine", "Opel Vectra", "Volvo", "Mazda". Optimally suited to the same detail with the "Audi A4". Before replacing a torpedo, it is necessary to take into account a number of nuances. After installation of the new element, the front part of the cabin will be pushed forward more and lowered to the floor. Certain inconvenience this design can create drivers tall with long legs, especially during long journeys.
In general, the option under consideration will not requirecardinal structural changes inside and outside the car. The Audi torpedo has a multifunctional unit with control controls and an air supply system (warm or cold), and this simplifies its installation.
Tuning bumper "Moskvich-2141"
Most often change the frontal element.This is due to the fact that the rear bumper still on test has got a fancy shape, but it turned out that it shows excellent aerodynamic qualities and confidently resists air flow.
Не обязательно выбрасывать штатную модель, it's enough just to understate it. This can be done with the help of suitable in size front "skirt". Next, the bumper is repainted to the color of the car, equipped with PTF or daytime lights. Such a reformation will significantly improve the exterior of the car.
In addition, the bumper can be spliced, leaving the nativethe top, and the bottom to attach a new version, for example from the VAZ-2114. You can do it yourself with the help of available tools. Initially, the part should be cut with a grinder along the upper line of the license plate, and in the donor set, the cutting line is selected depending on the expected height of the finished product.
Recommendations
Conducting tuning bumper 2141, should not be usedfor connecting visible parts of the riveting gun. Optimally, it is a galvanized building hood and a soldering iron. When heated, the sharp edges of the mesh will be melted into plastic, and after cooling, firmly fixed in it. To give the desired bend, use a building dryer.
After connection of the processed elements followsto putty seams special mixture for polymers. Then you need to sand the product using sandpaper fraction 800-100. Before applying the paint, treat the surface with acrylic primer, and after painting - with a protective varnish. When the varnish dries completely, the bumper is polished.
Conducting further tuning AZLK-2141, use branded ready-made kits that can be purchased in special workshops. The set, as a rule, includes the following elements:
- Lining the arch.
- Body kits.
- Bumpers.
- Thresholds.
These parts are mounted using a special sealant.
Motor boost
The most effective way to improvecharacteristics of the power unit and reduce its noise is a complete replacement of the motor. As a donor, you can use the installation of the "Audi 80". This motor will help to significantly improve the dynamics and power of the car in question. In this direction, tuning your own 2141 requires the purchase of all necessary consumables. Best of all, if it will be the entire engine, bought on disassembly. Then it is necessary to dismantle the regular motor "Moskvich", without breaking it into small components.
The old engine itself, the gearbox,semi-axles, radiator. Then carefully cleaned the place under the hood of the car. This operation must be carried out carefully so as not to damage the wires. The gearshift box is completely disassembled, diagnostics of its parts is performed. Next is the fitting of the assembled native gearbox and the new motor. If all the elements fit, the design is fixed, after which you will need to make a new subframe for the gearbox.
The next stage of improvement of the motor
Next tuning 2141, parts for which you canfound on disassembly or "on the hands", is carried out as follows. It is necessary to make sure that the clips of the internal CV joints are located directly opposite the hubs, and the power unit itself is in longitudinal slope. Not everyone does it right the first time. This stage of modernization is extremely important, it depends on the work of the engine and the presence of extraneous noise during movement.
After installing the new engine you need to "pants"power plant from "Audi" welded intermediate tube from AZLK. The catalyst from the domestic machine is not required, and the standard resonator and muffler can be left without elaboration, as well as the standard stabilizer. Together with the power unit "Moskvich" need to replace the scenes. To improve the final result, it is better to carve a sleeve of greater length, install it instead of the handle, and mount the handle on top.
In conclusion
Tuning 2141 to spend on their own completelyreally. Of course, you have to spend a little bit, but with the right work, the result will be worthy. First you need to stock up with all the necessary tools and spare parts. Next - the matter of technology.
