All the main controls (gas knob,clutch and brake levers, switches and signal switches, rear-view mirrors) are mounted on the steering wheel of a motorcycle. From this detail depends not only the speed of execution of various maneuvers while driving, but also in many respects the safety of both the motorcyclist and the other road users.
Varieties of motorcycle rudders
Dimensions and shape of the steering wheel depend on the class of the motorcycle.Of course, bike manufacturers establish this important technical element in the way that is considered the most correct and convenient. And many motorists are quite satisfied with the staff wheel, installed on a motorcycle during its construction (as a rule, all vehicles are made, focusing on a person of average height). But there is a sufficient number of motorcyclists who are not satisfied with the steering wheel (it either does not fit their size, or does not allow a comfortable landing, or does not satisfy in appearance). And since the steering wheel should be comfortable, and most importantly provide comfort and safety of the ride, it becomes necessary to replace it.
Today, a large number ofvarieties of rudders for a motorcycle, which can be installed instead of standard products: straight, low, high, H-shaped, universal with height, tilt and turn adjustments and so on.
Important! When choosing a replacement product, be sure to measure its diameter, otherwise difficulties in installing (and sometimes impossible) will not be avoided.
Replacing the standard mounting
It would seem that such a technical hub asfixing the helm of a motorcycle, it is difficult to subject to tuning. However, manufacturers of biker accessories have developed special devices that allow to extend the staff racks to which the steering wheel is attached. These products are very useful, for example, for people of high stature (that is, when it is necessary to set the stock wheel to a higher position). Such inserts under the steering wheel are released as a fixed length (from 18 to 50 mm), and with the possibility of adjusting vertically (up / down) and horizontal (forward / backward).
The price for such attachments from the German manufacturer SW-MOTECH, depending on the size, functional characteristics and brand of the motorcycle varies from 3,100 to 8,500 rubles.
Steering damper
Road irregularities (potholes, pits, tramways orRailway crossings) transmit significant vibrations to the steering wheel of the motorcycle. This leads to its uncontrolled swaying, thereby reducing control of bike control and traffic safety. To prevent this unpleasant phenomenon, the damper of the helm is installed. The principle of operation of this device is very similar to the action of wheel shock absorbers: it largely quenches undesirable oscillations of the rudder and provides an opportunity to make very rapid changes in the direction of motion. Structurally the damper consists of a body and a cylinder with a movable rod. The body is attached to the frame of the motorcycle, the stem to the rotating part of the steering system (usually a fork or traverse).
Modern motorcycles (both sports andlarge road) equipped with a dumpler steering wheel already in the construction of the factory. However, if your bike does not have this device, then you can make this useful technical tuning yourself. Leading manufacturers of stabilizer steering (HYPERPRO, Ohlins) produce as specific products, for specific models of motorcycles BMW, Ducati, Harley Davidson, Honda, Kawasaki, Suzuki, Yamaha, and universal (of various sizes). The price for original dampers is from 16,000 to 21,000 rubles. Copies from little-known manufacturers can be bought much cheaper.
Handles for motorcycles
Replacing the handlebar of the motorcycle is the easiest andan affordable way of tuning your two-wheeled pet. Sometimes it is necessary to do this because the standard products have worn out or become unusable as a result of the fall. And some motorcyclists just want to improve the grip of gloves with controls or reduce the vibration transmitted from the steering wheel to the hands. Others change their standard handles to change the appearance of the bike.
The choice of such devices is very diverse,both for the price, and for the design and materials from which they are made. So bright red ergonomic Ariete HALF WAFFLE from MX from polymer plastic can be bought at a price from 520 to 600 rubles, and a set of anti-vibration rubber handles with aluminum inserts HG020 from Rizoma will cost from 1300 to 1400 rubles.
Lovers maximally extend the motor season and ride even in inclement and cool weather can install on the steering wheel handles heated.
Holders for additional devices
Use a mobile phone or navigatorwhile driving, if they are not fixed on a motorcycle, uncomfortable, and most importantly - unsafe. To fix these necessary and useful gadgets are designed special holders on the steering wheel of a motorcycle. They are installed so that they do not interfere with the use of controls, and at the same time were available for use. Typically, a standard set of such devices includes a bracket for easy attachment to the handlebars, and a waterproof case with a transparent top and a quick-release clip that is attached to the rear. The choice is quite wide, so you can easily choose the size of such a device, according to the dimensions of the smartphone, navigator or tablet.
Such additional motorcycle accessories, such as a cigarette lighter or a charger with a USB connector, are usually sold complete with a holder for fixing on the handlebars of a motorcycle.
Finally
Any tuning of a motorcycle (whether it's a replacement for a regularsteering, fixing it, or installing additional fasteners) should not, first of all, prevent the driving of the vehicle and reduce traffic safety. Therefore, to change the stock products and install additional accessories must be approached carefully and carefully. The choice of a proven and reliable manufacturer is an important part of this process.
