Every modern car has a functionhighlighting rooms. This is necessary so that at night your license plate is readable and easily distinguishable. Usually the number illumination lamp is located in the ceiling, which is either integrated in the rear room frame, or in the iron of the trunk lid. On older cars, this element is located in the overhead canopy and to replace the lamp, the canopy is unscrewed and the lamp is replaced. To learn how to change the light bulbs on popular cars, read the article to the end.
Why change the rear lights
This fault does not affect in any way.the work of the car, but we paid attention to it, because for such a trifle, according to the traffic rules, a fine is imposed. In order to avoid trouble, the driver must know how to change the light bulbs with their own hands. The inspector, upon seeing that the lighting of the room is defective, will only be happy to report this. By the way, by replacing all the car's backlights with LED lights, you can save battery power and reduce the load on the power supply of the car.
"Lada Priora" - people's car
"Priora" - a very popular and prestigious modeldomestic producer "Lada". This car is very common, due to its low cost and prices for auto parts. Any car owner should know how to change the light bulbs on the number "Priore". In the niche of the back room there are two lamps and you can replace the light bulb in them without removing the lamp. By the way, it is installed on the bulb type W5W. For quick and proper replacement, you need to do a couple of actions. First, open the trunk, and secondly, carefully examine the area where the license plate is located. Then we find the wires going to each of the fixtures.
Now we will crank the bulb counterclockwise, remove the cartridge and insert it into the bulb. Back fasten the cartridge, turning clockwise.
The second replacement option is to pull the cover out to itself, prying it with a flat screwdriver. Do it carefully - the ceiling can be damaged.
How to change the backlight light bulbs on this car, we figured out, and others?
"Hyundai Solaris" - mastering Korean cars
This Korean automaker model does notless popular. This foreign car is profitable and prestigious, and also has a wonderful appearance. If you look at how to replace light bulbs on the Solaris, then at first glance it will be clear that the backlight is implemented on two lamps. It is almost similar to the previous car.
More details on how to change the backlight bulbs on the Solaris are described below.
To access the wiring located attrunk lid, you need to dismantle the trim in the right place, namely on the verge where the license plate is located. In order to do this, you must use a wide screwdriver or a metal ruler, inserting it into the seam between the iron and the casing, gently remove the latches. Do it carefully, do not damage the latches, however, if this happened, do not despair, they can be easily found on the market and replaced.
When we see wiring harnesses and bullets, wewe will be able to repeat the above actions: turn the cartridge counterclockwise, replace the lamp, put the cartridge back and turn it clockwise.
Change the lamp on the Toyota Corolla
The next car in our review is the Toyota Corolla. How to change light bulbs in a Japanese car?
As you can already judge from the photo, herenothing complicated. Remove trim in neat movements. Pulling out a faulty light bulb, replace it with a new one, be careful that it doesn’t crack in your hands when you remove the lamp and you do not get hurt, and then we assemble everything in reverse order.
Outcomes
Did you learn how to change the backlight bulbon popular cars. Be sure that on other models of cars there is nothing difficult and everything is done in the image of our examples. By the way, eliminating such minor faults with your own hands, you save money, because in auto repair shops for such procedures they take a lot of money, several hundred rubles, depending on the region. So why spend money on such trifles, if it is not difficult at all, even the most inexperienced driver?
