In each instruction that comes with the routerTP-Link, there is an algorithm for setting up network equipment, but not a word about solving connection problems. But without access to the software part of the router, the user will not be able to configure the device.
In this article, the reader will learn how to log in.TP-Link router and its settings. A complete algorithm of actions with step-by-step problem solving will be proposed. Naturally, to achieve the result, the user will have to use all the recommendations.
First start
If we are talking about a completely new device,only purchased in the store and never been turned on, the performance of the connection here depends directly on the computer settings. In fact, by connecting the wires correctly, as described in the instructions, the user easily connects two devices.
Next thing is the technique:how to access the TP-Link router interface is indicated in the same manual. You need to enter the IP address of the network device in the address bar of the browser and specify the username and password (they are identical to the admin) during authorization. This procedure is simple and does not require any knowledge of information technology from the owner of the router.
Customized Network Equipment
There are situations when the user getsused router. Here the situation can be resolved in several ways. Knowing how to log into the TP-Link router (if the seller has changed the factory settings and passed the authorization information to the buyer), you can freely reprogram the network equipment for you.
But there are situations when the user does not owninformation about the IP-address of the router, as well as the login and password. The problem is solved simply - you need to reset the network equipment settings to the factory settings. This is done by a special Reset button, which can be found on the control panel. Further connection is made according to the instructions that come with the router. It also describes in detail how to enter the TP-Link router.
Tips providers
TP-Link products are quite popular amongproviders who provide network equipment to their customers for free (of course, the user must connect on a contract basis). Here the situation for the owner is aggravated by the fact that programmers of organizations providing Internet access services often install their own firmware with their own authorization system. The password, of course, is not reported to anyone.
Before you think about how to enter the modemTP-Link, the user needs to make sure of the desirability of their desires. In most cases, the router is already configured and provides access via both wired and wireless channels to the Internet. But there are situations when you need to change the password to Wi-Fi or forward ports. The problem is solved in several ways. You can ask the provider to change the settings or install the manufacturer’s firmware.
Pitfalls in the software update process
It would seem that it may be easier than downloading fromthe official website of the manufacturer of firmware and install it on the router? But there is a problem. The fact is that the user will not be able to access the Administration tab in the device control panel. Anything can be hacked, both in software and hardware. The question here is different: do you really need to do this?
How to enter TP-Link router settings without knowingNeither login nor password? In addition, the network device itself has a non-standard firmware. Simply. Find out the IP-address of the router and with the help of a special utility to force a new firmware into the device. True, another question arises here: will the provider give its client settings on the network, having learned that it is not using a proprietary device?
On the other side of the wire
Thinking about how to log on to the routerTP-Link, the user forgets that, in addition to problems with the network device, inoperability can be caused by not making the computer “see” the router. The network card of any PC can be in three states: to be disconnected, to work in static mode, or to receive an IP address via DHCP. In the latter case, there should be no problems with connecting network equipment. But with the first two states will have to figure it out.
The network adapter can be disabled by hardware andprogrammatically. If the device is not detected by the operating system, you need to go into the BIOS settings and enable it (or install the driver). A software adapter is included through the control panel. Looking for answers to the question of how to access the TP-Link router, the user should not forget about the network settings.
User intervention
Going to the "Network Management Center" ownershould find the item "Change adapter settings." Next, the required network connection is selected, and after calling the alternative menu of the selected icon, the user needs to go to the adapter properties. Everything is simple. In the list of active components, you need to find the menu "IP version 4" and go to its properties.
In the menu that opens, the user needs tocancel the manual network settings by checking the box next to the caption: “Receive automatically”. You need to do this for both the IP address and the DNS. In general, before entering TP-Link WR841N or any other network equipment, it is better to make sure that the computer is configured to automatically receive the address and the domain name of the server (DNS).
Finally
As you can see from the review, nothing complicatedThere is no router connection to the computer. Yes, you need to spend more time on unnecessary procedures such as resetting, flashing network equipment, or changing the settings of a personal computer. But these are ready-made solutions that will really help any user to solve connection problems.
Задаваясь вопросом, как зайти на роутер TP-Link, any owner should understand that in most cases (the probability of 99% guaranteed) the solution to the problem directly depends on him. And of course, from knowledge that will always help solve any task.
