Shock-absorbing fork: advantages and use of the device

Depreciation fork - a very important part of anymountain bike, which is necessary to attach the front wheel to the frame and facilitate the management of this transport. There are several types of this device: hard and soft. The second type of products is more popular and is installed more often.

Depreciation fork can be of different shapes andkind of. In addition, the presented device may have a different cost. Naturally, the price depends on the quality of the device, the reputation of the manufacturer, as well as the material of manufacture. The simplest option does not have the ability to adjust, and also works on ordinary springs. It should be noted that this type of device breaks faster.

This design is mandatory inmodern mountain biking. The fact is, the suspension fork makes the ride more comfortable and safe, since it significantly reduces the level of vibration of the bike, as a result of which the control of the transport becomes easier, and the frame can last much longer. While driving, you can reach high speeds even on uneven roads.

However, the presented device has andnegative qualities. For example, the spring suspension fork, has a fairly large weight. In this case, if the bike rides on a bumpy terrain, then it can lose a significant part of the speed. It should be noted that those devices that have been manufactured recently are of higher quality, and some of the deficiencies in them are already being corrected.

The device of the presented design is enoughsimple. It consists of a spring, a damper (used to cancel oscillations). The plug can be spring-elastomeric, as well as air. The first option is better and has a cost of $ 85. However, this plug has a significant drawback - it freezes at low temperatures. Naturally, the quality of the construction is lost.

Bicycle shock absorber forkType is very high quality and has the highest cost. Instead of a spring, blows and vibrations dampen ordinary air. In very rare cases, they must be pumped up with a conventional pump. Since the presented type of devices has a low mass, the bike in this case can be used in rather difficult conditions.

Such structures can be fastened with the help ofthread or without it. It should be noted that the presented device can be set in a certain position. For example, adjusting the suspension fork on a bicycle allows you to adjust its stiffness. To do this, change the spring. In some cases, simply twist the regulator.

You can also adjust the level of the rebound of the plug andthe degree of its compression. In addition, thanks to a special regulator, it is possible to make a rigid one from a soft construction. All care for the plug provides for the regular removal of dust from its surface and the periodic lubrication of all moving parts.