Flowers are one of the most beautiful creationsnature, which are glorified in the Bible and repeatedly sang by poets of all ages. Their only drawback is too short a century. That is why for the decoration of the interior, clothing, accessories and hairstyles often use artificial buds, boutonniere and bouquets. They are made of paper, fabric, and recently for this purpose, also actively use and fame. In the latter case, a rose, a daffodil, an aster, a violet, a lily, a chamomile or some other garden and field flower usually turns out to be incredibly natural and can become an excellent substitute for a "living" analogue. With a neat design, you can also make a luxurious peony from foyamiran pink, white or crimson. It can be like a small bouquet, and a large, lush flower with a lot of petals and bright stamens. It is not so difficult to create, as it may seem. The only thing you need to get a chic bright and absolutely "live" peony from foyamiran - MK with photos and detailed step-by-step instructions.
What is fameamor
Этот современный поделочный материал, который also called plastic suede or ethylene vinyl acetate, is a soft sheet of a special foamed product synthesized by chemists. It is very pliable and plastic, easily cut and is capable of slight crushing and stretching. Due to these properties, the foiaran is excellent for making very beautiful flowers, with petals that will look quite like real ones.
To work with this material, in addition to scissors or a special cutter, you will need heating devices such as an iron, an embossing dryer and others, allowing you to shape the details you want.
After opening the packaging foiurane, sometimes you can feel an unpleasant smell. However, it should not frighten, since this material is absolutely non-toxic and can not harm the health.
Peony from Foamiran (MK): materials and tools
To make a flower you will need:
- foamiran 1 mm thick, dark green, light and dark pink;
- thick wire (1.5 mm) and thin - for leaves;
- acrylic colors of yellow, dark green and dark pink flowers;
- tap-band green, or even better, dark green color;
- sponge and thin brushes;
- hot-melt gun and manicure scissors with bent or flat tips;
- piece of foil.
Pattern
First of all, you need to make the necessary number of parts of different types. To do this, you will need a pattern of the pion from the fameirana, presented below. For one flower should be cut:
- 10 items of type "a" from a light pink foyamiran;
- 10 "b" light and 5 - dark pink color;
- 10 items "c" from a light pink foamiran;
- on 5 petals of type "d" and "e" of a dark pink shade;
- 3 leaves of dark green foamiran;
- 5 green tea leaves of types "k" and "l";
- 6 leaves "m" from the dark green foamiran.
In addition, to prepare a peony from fameirananeed a foundation in the form of "sun". To make it, from a light pink plastic suede you need to cut a circle, and then turn it into "rays" with sharp ends (part "g").
Peony from Foamiran (master class): toning
Surely everyone noticed that the petals of flowersusually have a heterogeneous color. This is especially true for pions. To give them the most natural appearance, you need to make the toning of the petals on both sides. To do this, using a foam brush or a small piece of sponge, you need to put a pink paint on the petals so that they become darker at the edges than at the base. When all the details have been processed, they need to be left to dry out, and to do drawing the veins with a dark green paint on the leaves and sepals.
Corrugation of petals
The next step that needs to be taken is tothe peony from foamiran turned out - it is giving the necessary form to details of pink color. This procedure is called shirring and requires a certain amount of patience. To do this, take each petal type "b" and fold it into an accordion. Then the part should be twisted into a flagellum, carefully spread out and slightly stretch the fingers of the edges of the petals so that they become transparent. Similarly, you need to do with petals like "a". Then it is necessary to deal with giving details of the "d" and "e" type a concave shape, "pulling" them in turn onto the thumb. As for the petals "c", their upper edge should be corrugated, as indicated above. In this case, the middle part needs to be pulled out, forming a "boat".
Corrugation of leaves
Next, they move to processing details of greencolors. For their corrugation, each sheet is folded in half, at the top of the leaf stretches the edges, and at the bottom - the middle (along the veins). You also need to simulate lateral veins. For this purpose, the part is folded at an acute angle with small folds, rubbed and rolled with large, index and middle fingers. At the end of the procedure, the tips of the leaves are slightly twisted.
The basis
From the prepared parts can be made asa peony bud from Foamiran, and a blooming large flower. It all depends on the size of the petals and leaves, and also on their number. To start creating a peony, you need a base that can be made from a large bead with a hole or a piece of foil. In the latter case, a ball is formed with a diameter of about 1, 5 centimeters and makes a hole in it with an awl or spoke. Then it is poured with glue, using a thermo-gun, and insert a thick wire. The same applies if the bead is chosen as the basis. And, finally, the last step is to put a piece of wire on the wire, tie all the "beams" over the bead with a thread and paint their tips in yellow, so that they mimic the stamens.
Assembling a calyx
When there is already a base at hand and everythingnecessary details, they should be combined together in the required order, so that a peony from foamiran turns out. Assemble in the following sequence:
- To the base of the rays-stamens, 10 "a" petals are glued.
- Wait 1-2 minutes for the glue to dry;
- Attach details "b", previously folded them with an accordion at the base. At the same time, first 10 light-colored petals are arranged around the circle, and then 5 dark ones.
- Pasting 10 petals of the type “c” in two layers, in a checkerboard pattern, and on them the largest pieces “e” in the amount of 5 pieces;
- Form the cup, gluing first 5 small leaves "l", and then between them - 5 more sepals "to".
Assembly of leaves, making cuttings
Peony from foamirana (master class with photos, seeabove) is almost ready. It remains to make leaves. To do this, glue is applied to the base of the part at a distance of 1–1.5 cm from the edge, a wire is applied and, rolling a leaf, they glue the edges of the base. When all the leaves have cuttings, they are fastened two to three together with a tape.
The final stage of flower formation
With the help of green tapes make out the stempeony and twisted to it the branches with leaves. Then straighten and slightly tousle the petals so that the flower began to look as natural as possible.
Now you know how to make peonies fromfoamiran, photos of which can sometimes be taken as images of natural flowers. They will decorate an evening dress, a headband or a festive hairstyle. And if you make a few peonies of different colors and sizes, then you can collect from them an elegant composition that will be a great gift.
