Some tips on how to make a bow and arrow with your own hands

Why can they need bow and arrows?There are several reasons for this. Children imagined themselves to be brave Indians or Elves. Perhaps you yourself are planning a hike in the TV show "The Last Hero". To be fully armed, we will consider how to make a bow and arrows by one's own hands, especially since it is possible for any person.

Material preparation

Initially, we need to select a suitable tree andCut the branch. For the manufacture of ancient missile weapons, you can use ash wood, mountain ash, willow, juniper, oak, birch. It is best to start harvesting the material in winter after the frost hits. Before you make a bow and arrow, you need to take into account the swing of the hands of the future shooter. Cut the branch should be longer than required for making onions - the stock can be up to thirty centimeters. A branch 3-4 cm thick should be flat, without knots. You do not need to remove the bark from it. She herself will go away in the process of further stripping the workpiece.

Drying of blanks

Learn how to make a bow and arrowswith their own hands, is not at all difficult. The process takes place in several stages. The ends of the branch are covered with oil paint. After that, the workpiece is left in an upright position for drying. Dry at room temperature for at least three months, but future weapons can dry and within a year. In any case, by the summer season will be ready.

Bow shaping

In order to make a bow and arrows yourhands, you need a knife and an ax. When the dried branch is treated, it is given the necessary shape. It can be lenticular or rectangular. To give the desired bending of the shaft, it is enough to steam off the shoulders of the onion at home. And they process both at once. They become flexible. After this, the onions are placed in a slant of a curved shape. So the workpiece is left for a couple of weeks. Then cut the notches for the bowstring.

So how to make a bow and arrows with your own handsvery carefully, handle the blanks with a knife with caution, so as not to damage the wood. The branches, freed from the bark, are covered with a wax layer of 3 mm. Also suitable melted fat. These measures will protect wood from environmental degradation. Bowstring is recommended to be pulled only before shooting. For its manufacture, rawhide leather, thin rope or twine will do. When storing onions, it is better to remove it.

Making arrows

Now you are introduced to the way how to dobow. And it's also easy to make arrows with your own hands. For them, wood of a pine or a birch is useful. The flat board is treated with a planer, until the thickness of 1.5 cm remains. Then the workpieces are cut from it. The length of the future boom is from 60 cm. When making shells, it is necessary to take into account the growth of the future shooter, the force with which he will pull the string, the swing of his hands. Blanks should be processed with a knife, file and sandpaper to a diameter of 8-9 mm. To feather one arrow, three crow's feathers will be needed. Each cut along the groove, cut off the pile from their tips. Then the prepared feathers are attached to the shaft with a string. They are positioned to each other at an angle of 120 °. As a tip, a triangular metal plate is suitable.