Metal punching: features, advantages and methods of application

One of the most popular types of metalis a carving, or in another way a metal cutting. Such is the waste material left after pressing production. Initially, the cutting is clad with copper or brass, so its products last a long time.

This is one of the materials for arranging the mostdifferent objects. For example, to perform the fence of a private country house, cottages. Importantly, the constructions using cuttings are very simple and easy to assemble; therefore, they can be made independently without the assistance of outside help.

Material Features

Manufacturing method - drawing out of steel.In hot-rolled production, sheets are 40-60 mm thick, on cold-rolled - 15-20 mm, and the thickness of galvanized sheets is 7-8 mm. The next stage is pressing, which allows to obtain sheets of a large plane that can resist deformation. The use of such a method of production and its waste-free allow you to get more affordable material.

In preparation for the use of punchingmetal does not need any treatment, but after the manufacture of the necessary structure, for example, the same fence, it can be painted so that the metal does not begin to oxidize from the effects of moisture precipitation.

Although cutting is a waste product, the structures made of it are durable and able to withstand long service lives.

Benefits

Metal carving, and then its products, have a lot of important characteristics. These include:

1. Extraordinary look.
2. Low cost.
3. Security.
4. A variety of perforation patterns.
5. Easy installation.
6. Reliability design.

К преимуществам материала относится и то, что на sheets no seams or cracks. In addition, the material does not include formaldehydes and other volatile chemicals harmful to humans. Conclusion: metal cutting is one of the alternative materials that can create excellent competition to expensive counterparts.

Methods of application

Many consumers prefer to purchase this material because of its versatility, since cutting can be used in many cases:

1. As an alternative to the chain-link.
2. To create under the fence additional ventilation.
3. Perform foundation reinforcement.
4. To strengthen the brickwork.
5. For the manufacture of stairs.

Such a wide variety of applications caused bythe difference of products based on both the thickness of the sheets and the type of equipment - it is sheet (suitable for fences) and roll (convenient for reinforcement).

Options

The dimensions of the sheets are very important if a perforation metal is used for stairs. In this case, it is necessary to observe certain geometrical parameters in the following points:

1. The maximum deviation in sheet sizes is ± 25 mm in length and ± 10 mm in width.
2. The torn structure should not take place on the sheets.
3. If you plan on one side of a sheet of non-overlapping area, its width must be specified in advance with the customer.

Marching stairs, the construction of whichmetal cutting was used, they are considered the most convenient and therefore are built everywhere. In addition, their installation saves space in the room. Taking into account the structural features of staircase products are of the following types:

1. With bowstrings. So called inclined beams located along the details. They are the basis of the carrier side. The end elements of the march in such products are closed with string.
2. With kosourami. The shape of the elements is sawtooth, so that steps can be laid on them.