In order to use the Bulgarian, masters often purchase a frame. Such an addition to the instrument can be purchased or manufactured independently.
Is it worth buying a bed
The frames for Bulgarians are of different types,for example, Chinese. Such elements are preferable not to buy, because they are very short-lived, because they are made of sheet steel by punching technology. After the tool begins to work, minor vibrations make the machine unstable, and therefore dangerous. It is best to make such a stand yourself, while you will be assured of its quality and reliability.
Safety regulations
If you decide to start making a bed forBulgarians, then first you need to analyze all the available designs that exist on the market. Most often you can find a frame that is designed for discs of 125 millimeters: using a 230 mm bulgark is already dangerous in tandem with such equipment, as it often requires the removal of protective covers. Among other things, such stands for Bulgarians suggest that the master will stand directly opposite the disk - this makes you neglect the safety rules. If you decide to design the machine yourself, then only use high-strength materials for the protective housing. The frame for a self-made Bulgarian is often made using Plexiglas so that the screen does not interfere with the survey, but it is forbidden to use materials that are capable of breaking down from mechanical effects. It is preferable not to manufacture structural elements using improvised materials, but to buy finished products that are capable of providing the highest degree of protection.
For the reason that a Bulgarian is considered one of thethe most popular instruments on the farm, it is preferable to make the most reliable bed for it, since it will be used in tandem with the tool very often. Justifies the independent production of this supplement to the Bulgarian and the fact that the factory production base is quite expensive. Moreover, it is not possible to use the unit for traditional cutting operations. It is for this reason that the cutting tool involves the possibility of performing a variety of functions, a bar stand was invented. Stands for Bulgarians can be used only if necessary, in other words, the main tool can be used in many ways, while the frame can be left temporarily. It is important to remember before starting the manufacture that the attachment for the equipment should be located in a place that is specially set aside for this, which will prevent injuries. In order to produce such a tool, you need to have some knowledge, experience, and a certain set of materials and tools.
Preparatory work
The frames for Bulgarians are made by themselves fromdifferent materials. Among them, wood or metal can be distinguished, which depends on the scope of application. The most commonly used for the production of the frame are shaped steel pipes. This material will be able to provide the most increased strength and reliability of the elements. However, this solution has certain disadvantages, which are expressed in the fact that it will be necessary to use electric welding. As an alternative, you can use the racks in the base profiles, but in this case the problem remains. It will be necessary to use a welding machine, which is not always available. However, if you think about it, almost all the welding work can be replaced using bolts. For their installation it will be necessary to prepare holes by drilling. This option will be most suitable, because the wizard will have a great opportunity, which is expressed in the fact that the machine can be disassembled if necessary. This method is recommended to be used if the frame for the Bulgarian is made from wood by hand.
If you decide to use a tree, then when you selectlumber for this purpose should carefully monitor the quality of the material used - it must be strong enough, resilient, and well-dried.
Production features
If you make homemadethe frame for the grinder, it is necessary to initially prepare the drawing of the future stand. To do this, you need to learn the principle of the model, which you can find on sale. It is important to understand how to properly fix the instrument. Drawing does not require special skills. It is enough to accurately determine the dimensions and transfer them to paper. After the drawing is ready, you can start preparing the material. If you decide to use profiled pipes, you will need to cut the workpieces and make the necessary holes. Before you start cutting the pipe, you need to clarify the dimensions, which will prevent damage to the material.
Council of the master
If you will be made yourselfthe frame for the Bulgarian, the drawings of which you have already prepared, it is preferable to use wood if you do not want to spend a lot of time and effort on fabrication. However, it must be remembered that the process will be easy, but the machine will not be as strong as the metal one. You can choose only those materials that will not be deformed during operation.
Manufacturing
Homemade frame for Bulgarians, whose drawingswere prepared, should be based on a platform that is strengthened on the surface of the desktop, with the use of bolts. This will eliminate vibration. In order to realize the simplest design, it is necessary to use steel, as well as corners. The design will be very simple. It is important to supplement the rack with a hinged handle that will fix the tool. On this we can assume that the design is ready.
